|
| 1 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge. |
| 2 | i) 200 amps |
| 3 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
| 4 | i) 75 HP/ 55 kw Relay range within 45-75 + 10% |
| 5 | ii) 100 HP/ 75 kw Relay range within 45-75 + 10% |
| 6 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge. |
| 7 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. |
| 8 | i) 35 sqmm |
| 9 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-incharge. |
| 10 | Providing and fitting fixing of moving iron type, Range 0-100/0- 200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 11 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
| 12 | i) 128-160 Amps |
| 13 | Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) (12 mm dia perforation), laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge. |
| 14 | i) For 3-phase connection with 4.00 mtr. Long G.I. pipe |
| 15 | Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge. |
| 16 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge. |
| 17 | i) 5-15 kVAr 440 V |
| 18 | Providing and fitting fixing single phase preventer + selectable under voltage + selectable over voltage with delay selectable off delay 15 sec and on delay 5 sec and phase asymmetry 10 % of L&T /BCH/HAVELLS/SIEMEN etc. make complete as per direction of the Engineer-in-charge. |
| 19 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work. |
| 20 | ii. 40 mm dia. nominal bore |
| 21 | iii. 150 mm dia. nominal bore |
| 22 | Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in - charge. |
| 23 | i) 150 mm nominal bore |
| 24 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. |
| 25 | i) 150 mm dia. A. PN - 1.6 |
| 26 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 27 | i) 40 mm dia |
| 28 | Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 29 | i) 40 x 40 x 40 mm dia |
| 30 | Providing and fitting fixing MS Foot valve as per relevant IS specification and the direction of the Engineer-in-charge. |
| 31 | i) 150 mm dia |
| 32 | Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in-charge. |
| 33 | Providing and fitting fixing of horizontal centrifugal (HSC type) pump of 50000 GPH, 35 meter, impeller : CFBM/Bronze, shaft: EN8 and Sleeve: SS 410 of of GRW/KIRLOSKAR/JASCO/CGL etc. make and with horizontal foot mounted Sq. case induction type motor of 37 KW/50HP, 415 +10% V, 1500 to 2000 RPM (Syn.) 3 phase etc. of GRW/KIRLOSKAR/JASCO/CGL etc. make including with accessories such as MS fabricated base frame, coupling guard, foundation, nuts & bolts etc. having relevant ISO 9001 & ISO 14001 quality certified, installation and trial run testing complete as per direction of the Engg-in-charge. |
| 34 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 35 | Earthwork insurface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sq mon plan including disposal of excavated earth upto 50 m and lift upto 1.5m, disposed soil to be levelled andneatly dressed:-All kinds of soil sqm |
| 36 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. a) All work upto plinth level |
| 38 | ii) 1 : 3 : 6 ( 1 cement : 3 fine sand : 6 graded stone aggregate of 20 mm nominal size) |
| 39 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement |
| 40 | i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 41 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 42 | i) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 43 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 44 | i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 45 | First class brick work in foundation and plinth including cost of all materials as required complete: |
| 46 | i) In cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 47 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- |
| 48 | i) In Cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 49 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- |
| 50 | i) In Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 51 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 52 | i) Fixed to steel windows by welding. |
| 53 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 54 | i) Hot finished welded type tubes |
| 55 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. |
| 56 | i) 40 mm thick |
| 57 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 58 | i) 0.63 mm thick Zinc Coating not less 275 Gm/m2 |
| 59 | 12 mm cement plaster of mix. |
| 60 | ii) In cement mortar 1:6 (1 cement : 6 fine sand) |
| 61 | 15 mm cement plaster on the rough side of single or half brick wall of mix |
| 62 | In Cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 63 | Neat cement punning. |
| 64 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on old work(one or more coats), to give an even shade as required complete as per direction of the Engineer in charge |
| 65 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work (one or more coats) including preparation of surface as required complete as per direction of the engineer in charge |
| 66 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: |
| 67 | Two or more coats on new work |
| 68 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : |
| 69 | 4.0 mm thick glass pane |
| 70 | 5.5 mm thick glass panes |
| 71 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) : For fixed portion of approved quality |
| 72 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 73 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ): |
| 74 | Providing & fitting fixing spare coil type ML 1.5 Cat No. SS90873 of L & T make as per direction of Engineer in charge. |
| 75 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing etc. all complete as per direction of Engineer-in-charge. |
| 76 | Dark shade pigment using ordinary cement |
| 77 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. Please Enable Macros to View BoQ information |
