Tender For Urgent Flood Damage Repair Of Different Roads Killa Pwd(R&B) Subdivision/ S.H.:Protection Works Through Placing Of Wire Crates, Palasiding, Landslide Clearence Etc During The Year 2026-27 (Gr-I)., Tripura-Tripura
TDR : 56178680
Tender Notice
BOQ
5 Days Left
Tripura
Tripura
Tender For Urgent flood damage repair Of Different Roads Killa Pwd(R&B) Subdivision/ S.H.:Protection Works Through Placing Of Wire Crates, Palasiding, Landslide Clearence Etc During The Year 2026-27 (Gr-I).
Name of Work:- Urgent FDR of different roads Killa PWD(R&B) subdivision/ S.H.:Protection works through Placing of wire crates, Palasiding, Landslide Clearence etc during the year 2026-27 (Gr-I).
Sl. No.
Item Description
1
Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 mExcavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections and transporting to the embankment location with all lifts and lead upto 1000 m as per MoRD Technical Specification Clause 302.3.
2
Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5.
3
Excavation in Cutting in soil by manual means with lead upto 50 mExcavation in Roadway cutting in soil by using manual means for carrying of cut earth to embankment site with all lifts and lead upto 50 m as per MoRD Technical Specification Clause 302.3.
4
Providing and constructing gabian structures for erosion control, river training works and protection works with wire crates of size 1.50 m x 0.60 m x 0.60 m each divided into 1m compartments by cross netting, made from 4 mm galvanised steel wire @ 32 kg per 10 sqm having minimum tensile strength of 300 Mpa conforming to IS:280 and galvanizing coating conforming to IS:4826, woven into mesh with double twist, mesh size not exceeding 100 mm x 100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be securely tied with 4 mm galvanised steel wire. as per drawing and MoRT&H Technical specifications clause 2503.3.
5
Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minmum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification.
6
Single bamboo palasiding/walling of whole 2nd class bamboo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying with wire complete and struts 1.5 m apart longitudinally and providing bitumen drum sheet walling fixed with nails as per drawing and MoRD technical specification Clause 1302.5. A) Driven at least 900 mm below ground and 1200 mm above ground on average
7
Flat Brick Soling. Providing and laying flat brick soling layer on prepared subgrade according,filling joints with Earth free from clay with a plasticity index not execeding 6,watering and rolling the same with three whecled road roller 80-100 Km as per MoRD Technical Specifical Clause 412.
8
Brick edging laid lengthwise: Providing and laying brick edging laid lengthwise on prepared subgrade according to lines,grades and croo-secrion shown on the drawing,filling joints with earth,free from clay with a plasticity index not exceeding 6,watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
9
Supply of mixed class brick bats laying the same in road depressions and stretches including spearding one layer of binding materials to make it good to proper grade and camber as per direction of the Engineering in Charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
