|
| 1 | Excavating trenches by mechanical / manual of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 2 | All kinds of soil DSR 2.10.1 |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. But not exceeding 300mm dia DSR 2.10.1.2 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :DSR 6.4 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 6 | 12 mm cement plaster of mix DSR 13.4 |
| 7 | 1:4 (1 cement: 4 fine sand) as per DSR 13.4.1 |
| 8 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 9 | Kitchen sink without drain board |
| 10 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 11 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16.A |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.DSR 17.28 |
| 13 | 32 mm dia DSR 17.281.1 |
| 14 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 15 | 100 mm dia DSR 17.35.1.2 |
| 16 | Centrifugal sand cast iron 3989 |
| 17 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 18 | 100 mm dia DSR 17.40.1.2 |
| 19 | Providing and fixing collar: DSR 17.57 |
| 20 | 100 mm DSR 17.57.1.2 |
| 21 | Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :DSR 17.60 |
| 22 | 100 mm inlet and 100 mm outlet DSR 17.60.2.1 |
| 23 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR 17.81 |
| 24 | Providing for fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good etc. As per 18.10 |
| 25 | 20 mm dia. nominal bore as per DSR 18.10.2 |
| 26 | Providing &fixing Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11 |
| 27 | 15 mm dia nominal bore DSR 18.11.1 |
| 28 | 20 mm dia nominal bore DSR 18.11.2 |
| 29 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :DSR 18.17 |
| 30 | 20 mm dia nominal bore DSR 18.17.1A |
| 31 | Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 32 | 45 cm length DSR 18.21.2 |
| 33 | 15 mm nominal bore DSR 18.21.2.1 |
| 34 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 35 | 20 mm nominal bore DSR 18.46.2 |
| 36 | Providing & Placing on terrace (at all floor levels) polyethylene water storage tank, ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes forinlet,outlet and overflow pipes but without fittings and the base support for tank.[500 ltr] DSR 18.48 |
| 37 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge DSR 18.53A |
| 38 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 39 | 20 mm nominal bore, DSR 18.62.2 |
| 40 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: DSR 19.4 |
| 41 | 100x100 mm size P type DSR 19.4.1 |
| 42 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1 |
| 43 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : DSR 19.21 |
| 44 | For pipes 100 to 250 mm diameter DSR 19.21.1 |
| 45 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement 7 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1. cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 173 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc, complete as per standard design: DSR 19.30 |
| 46 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.30.3 |
| 47 | Inside dimensions 600x 850 awn and 45 cm deep for pipe line with three or more inlets : DSR 19.30.3.1 |
| 48 | Providing and fixing wash basin with C.I. brackets, without pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require |
| 49 | Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make |
| 50 | Providing and fixing of Bib cock with wall flange, make Jaquar range Continental Model CON-047PM or equivalent model of approved make to the satisfaction of EIC |
| 51 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range Continental Model CON-057PM or equivalent model of approved make to the satisfaction of EIC |
| 52 | Providing and fixing of Long Body bib cock with wall flange, make Jaquar range Continental Model CON-37PM or equivalent model of approved make to the satisfaction of EIC |
| 53 | Providing and fixing of Central Hole Mixer with 450 mm long braided hoses, make Jaquar range Continental Model CON-167KNB or equivalent model of approved make to the satisfaction of EIC |
| 54 | Providing and fixing of Sink Mixer with Swiniging Casted Spout ( Wall Mounted Model ) with connecting legs and Wall Flanges complete make Jaquar range Continental Model CON-309PM or equivalent model of approved make to the satisfaction of EIC |
| 55 | Providing and fixing of Wall Mixer 3 in 1 System with provision for both Hand Shower and Overhead Shower complete with 115 mm long bend pipe,Connecting Legs and Wall Flange make Jaquar range Continental Model CON-281KN or equivalent model of approved make to the satisfaction of EIC |
| 56 | Providing & fixing of Overhead Shower 180 mm Make Jaquar Model 1759 or equivalent model of approved make to the satisfaction of EIC |
| 57 | Providing and fixing Shower Arm 450 mm long make Jaquar Model SHA-479L450 or equivalent model of approved make to the satisfaction of EIC |
| 58 | Providing & fixing Hand Shower 100 mm Round Shape Single/Multi Flow Make Jaquar Model HSH-1937 or equivalent model of approved make to the satisfaction of EIC |
| 59 | Providing and fixing Flexible tube for Hand Shower Make Jaquar Model SHA-549 or equivalent model of approved make to the satisfaction of EIC |
| 60 | Providing and fixing of Wall Bracket for Hand Shower make Jaquar or equivalent model of approved make to the satisfaction of EIC |
| 61 | Providing and fixing of Glass Shelf Corner Jaquar range Continental Model ACN-1171N or equivalent model of approved make to the satisfaction of EIC |
| 62 | Providing and fixing of Glass Shelf make Jaquar range Continental Model ACN-1173N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 63 | Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of approved make to the satisfaction of EIC |
| 64 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of approved make to the satisfaction of EIC |
| 65 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent model of approved make to the satisfaction of EIC |
| 66 | Providing & fixingHand Shower (Health Faucet) (ABS Body) with 1 Meter Long Easy Flex Tube in Chr ome Finish & W all Hook complete Make Jaquar Model ALD-585 or equivalent model of approved make to the satisfaction of EIC |
| 67 | Providing and fixing of C.P. Toilet Roll Holder complete in all respects make Jaquar or equivalent model of approved make to the satisfaction of EIC |
| 68 | Providing and fixing of C.P. Nozel tap for gardening of approved make |
| 69 | Providing and fixing of C.P.Steel Grating Heavy (With hole without hole) size 4\\" i/d with 114 gram wt. of approved make |
| 70 | Providing and fixing of C.P. Soap Dispenser complete in all respects make Jaquar range Continental Model ACN-1135N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 71 | Providing and fixing 1 H.P. monoblock boosting pump including cost of fixing & fitting accessories, Head range 6 to 39 mtr, discharge 2880-750 LPH, CG Mjnisapphire or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 72 | Providing and fixing Hydro pneumatic pump of size 0.5 HP of approved make with pressure switch pressure gauge, accessories and making connection complete having discharge 2000 LPH at 6m head make Crompton or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 73 | Providing& laytng Drip sill joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings |
| 74 | 100mm |
| 75 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 76 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 77 | Providing and fixing GI Tank Nipple 20 mm dia complete |
| 78 | Providing and fixing of Regular Body of concealed Stop cock suitable for 15mm pipe line with protection cap ( without Exposed part ) make Jaquar Model ALD-CHR 083R or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 79 | Providing and fixing of Export part kit of concealed Stop cock with fitting sleeve Make Jaquar Model OOP -CHR -15083KPM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 80 | Providing and fixing of Two in one Angle Cock Make Jaquaror equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC Please Enable Macros to View BoQ information |
