|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8 |
| 2 | All kinds of soil DSR 2.8.1 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 4 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.1 |
| 6 | Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2 |
| 7 | 15 mm cement plaster on rough side of single or half brick wall of mix: DSR 13.5 |
| 8 | 1:4 (1 cement: 4 coarse sand) DSR 13.5.1 |
| 9 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR 2.27 |
| 10 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished ,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab upto 0.50 sqm DSR 8.2.2.1 |
| 11 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of quired size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) DSR 10.28 |
| 12 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : DSR 12.21 |
| 13 | In 75x75 mm deep chase DSR 12.21.1 |
| 14 | Providing and fixing of fiberglass cartoon figures with sculpture of size upto 6'(Height)x7'6\\"(Width)x1'6\\"(Thickness) including painting with good quality paint and gloss coating including fixing on existing platform to the entire satisfaction engineer in charge. Cost includes all type of labour cost, material cost, transportation cost etc. NS |
| 15 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60 |
| 16 | Providing and fixing of fiberglass figure of size upto 2'6\\"(Height)x1'6\\"(Width)x1'6\\"(Thickness) fixed on stainless steel pipe of length upto 9' and dia upto 1\\" including painting with good quality paint and gloss coating including fixing on existing platform to the entire satisfaction engineer in charge. Cost includes all type of labour cost, material cost, transportation cost etc. NS Please Enable Macros to View BoQ information |
