|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable Tender Inviting Authority: Staff Officer (Civil), Wani Area, Western Coalfields Limited Name of work: Repairing and renovation of water treatment plant under Ghugus Sub Area of Wani Area.(2nd Call)NIT no.: WA4350-CIV-E-015-2026-27 . Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder) ITC Not Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.) GST to be paid by bidder (in Rs.) GST to be paid by WCL (in Rs.) Name of the Bidder/ Bidding Firm / Company : Select 18.0 0.0 0.0 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 13 2.8.1 All kinds of soil. |
| 3 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) |
| 7 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patchesof area 2.5 sq.meters and under, including cutting thepatch in proper shape, raking out joints and preparing andplastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete asper direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 9 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 10 | Neat cement punning. |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 12 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Hot rolled deformed bars |
| 14 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying aprimingcoat of approved steel primer all complete. |
| 15 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 16 | Dismantling roofing,ridges,hips, valleys and gutters etc and stacking the materials within 50 m lead: GI sheet/GS sheet |
| 17 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 18 | Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred andwelded, including fixing of necessary butt hinges andscrews and applying a priming coat of approved steelprimer.Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 20 mm nominalsize). |
| 19 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 20 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick |
| 21 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 23 | Finishing walls with damp proof paint of approved quality and required shade: Two or more coats applied @ one liter/2.32 sq. m. (for verticle) with all leads and lifts etc. complete |
| 24 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 25 | Dismantling doors, windows and clerestory windows (steel orwood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within 50 metres lead Of area 3 sq. metres and below |
| 26 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 423.95 |
| 28 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding |
| 29 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 30 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378)100 mm |
| 31 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378)300x16 mm |
| 32 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 33 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture .M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.30 mm thick plain PVC door shutters |
| 34 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 35 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 37 | Providingandsupplyinginstandardlengths ISI mark rigidunplastisedPVC for potable waterwith rubber ring joints includingcost of rubberringasperIS-4985-1998,excludingGST leviedbyGOIandGOMinall respect, including transportation, freightcharges, transit insurance, inspection charges, loading, unloading, conveyance tostoreandstacking thesame in closedsheddulyprotected fromsunraysand rains,etc.complete(withthirdpartyinspection) (socketed); b) Working Pressure 6 Kg/Sq.cm 110 mm. |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 39 | 16.71 Providing and fixing G.I. chain link fabric fencing of requiredwidth in mesh size 25x25 mm made of G.I. wire of dia 3mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 40 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I.staples, turn buckles etc. complete. (Cost of posts, struts, earthwork and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire metre |
| 41 | trimming of trees on the girth (measured at aheight of 1 metre above ground level ) including trimming of branches ,stacking of servicable material and disposal of unservicable material and all other complete ,as per vinstruction of engineer in charge carried out material by mechanical transport including loading unloading & stacking (1km) work is to be carried out near by service building and it is to be carried out carefully without any damage to any building/establishment .(girth size beyond 60 cm and upto 120cm ). |
| 42 | trimming of trees on the girth (measured at aheight of 1 metre above ground level ) including trimming of branches ,stacking of servicable material and disposal of unservicable material and all other complete ,as per vinstruction of engineer in charge carried out material by mechanical transport including loading unloading & stacking (1km) work is to be carried out near by service building and it is to be carried out carefully without any damage to any building/establishment .(girth size beyond 120 cm and upto 240 cm). |
| 43 | trimming of trees on the girth (measured at aheight of 1 metre above ground level ) including trimming of branches ,stacking of servicable material and disposal of unservicable material and all other complete ,as per vinstruction of engineer in charge carried out material by mechanical transport including loading unloading & stacking (1km) work is to be carried out near by service building and it is to be carried out carefully without any damage to any building/establishment. (girth size abvove 240 cm ). |
| 44 | trimming of trees on the girth (measured at aheight of 1 metre above ground level ) including trimming of branches ,stacking of servicable material and disposal of unservicable material and all other complete ,as per vinstruction of engineer in charge carried out material by mechanical transport including loading unloading & stacking (1km) work is to be carried out near by service building and it is to be carried out carefully without any damage to any building/establishment. (girth size upto 60cm). |
| 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 46 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 47 | Clearing grass and removal of the rubbish up to a distance of50 m outside the periphery of the area cleared. |
| 48 | Finishing walls with Acrylic Smooth exterior paint ofrequired shade New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 0.90 litre/10 sqm |
| 49 | Providing and fixing concrete bench at premises,including labour charge, trasnportation etc. all complete as per direction of Engineer in charge |
| 50 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 51 | Providing and supplying in standard lengths PolyethelenePipes,confirming to IS4984/14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread/ insert joint/ quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspectioncharges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GO Minall respectetc .complete. PE-100, 16Kg/Sq.cm: vii) 160mm Rmt 1479 |
| 52 | Lowering, Laying and Jointing H.D.P.E./M.D.P.E. pipes inproper position including all specials by compression fitting/electrofusionand butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer incharge as per IS-7634 Par 160mm Rmt. 130 |
| 53 | Supplyig & installation and commissioning (10000 GPH) pressure sand filter ,with manual operation ,vertical down flow ,50 m3/hrflow rate ,3.0 kg/cm2 normal operating pressure ,0.5 kg/cm2 pressure drop ,vessel diameter 2500mm ,height LOS2000mm ,filter media quartz silica sand ,free board 500mm,shell thicknes 08mm,dish thickness 10mm,material of (m.s) frontal piping 150nb4'' ,G.I (ms with galvanised ,thickness of stainer plate 12mm,no of support of stainer plate 4 nos,man holes at top & bottom ,internally with paintng two coats ob black bituminous & externally two coats of silver paints ,externally two coats of red oxide ,40nb air vent ,back wash timer 15minutes. |
| 54 | Supply and commissioning of raw water pump with MCC panel ,Cabling ( From panel to Pump ) suction and discharge header and NRV valves ,cetc all complete as per instruction of engineer in charge. |
| 55 | Supply of Treated Water Transfer Pump monoblock pumps 2nos 1 working continues operation capicity 50m3/hr ,50metre head(3.5kg/cm2)suction valve ,discharge valve nonreturn valve 150nb,sp[eed 2900/2800rpm,voltage 415v,3phase. Mcc panel 15hp 3 nos ,start/stop buttom 3 nos on & off indication lamp 415v3 phase ,butterfly valve ,inter valve, del valve etc all complete as per instruction of engineer in charge. |
| 56 | Supply ,Erection and commissioning of Flash mixer,gear box assembly with motor and Agitator Model : SNU 1 ¾ or any other equivalent model “ Ration : 30 : 1 Output : 50 RPM Input RPM : 1500 RPM Gear Box rating : 0.67 Kw Output torque : 96.3 Nm Qty : 1 no Make : Elecon/equivalent Agitator Type : Paddle type MOC of Shaft : MS RPM : 100 Mounting : Vertical Mounting Make of Motor : CGL/equivalent Power : 1 Hp Power Supply : 3 ph/ 415 V/ 50 Hz Accessories : Pulley , V – Belt ( Note - any other equivalent model with above specifications ) |
| 57 | Supply, erection and commissioning of clarifloculators bridge drive assembly with motor and accessories Qty : 1 No. Make : Elecon Model or any other equivalent model : 4\\" SNU-U Ratio : 70:1 Type : Worm MOC : CS Input RPM : 1500 Output RPM : 21.4 Output torque : 62 Da NM Out Put Shaft : Vertical Output Shaft Motor : 2 Hp Motor Make : CGL Power Supply : 3 ph/ 415 V/ 50 Hz Accessories : Pulley , V – Belt Wheel : mild steel DRIVE : rake arm working Assembly : chain pocket ( Note - any other equivalent model with above specifications ) |
| 58 | Supply erection and commissioning of DOL starter ,on-off switch ,with mcb etc suitable for 3 phase motor utpo 2 HP |
| 59 | SUPPLY of 3 core copper armored wire 4 sqmm in thickness |
| 60 | CURRENT CONNECTOR SLIP RING 90 MM ID CARBON BRUSH 20*20*25 MM 8 NOS TRUS ROD UPC 6*200MM MS PLATE 200*300 MM. PEDESTAL BEARING 1 NO. |
| 61 | Providing, aupplying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119 12 and BS476 part 6 and 7 class O)sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre) |
| 62 | providing and fixing inner cutting LED letter on 3mm thick ACP sheet box of 65mm thick width with complete inner cutting of letters along with all wiring and providing LED lights as per the requirement with working height upto 7.00 m above ground level .the writting matters sketches etc will be as per instruction of Engineer in charge |
| 63 | Total impact of GST for the purpose of CTC Total in Figures 11541458.971414922 11541458.971414922 INR One Crore Fifteen Lakh Forty One Thousand Four Hundred & Fifty Eight and Paise Ninety Seven Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
