|
| 1 | (A) Construction of Indra Varsha with Mist Fogger System from New Entry point of Shivganga to Q-Complex Entry Gate. Provision for Supplying of Fogger kit of 140 nos nozzles with timer, fitter and other accessories(one unit of length 230 mtr.) |
| 2 | Providing and Supplying of Syntax Tank of Capacity 500 ltr for water storage and distribution for mist fogging. 3 nos x 500 ltr =1500 ltr |
| 3 | Providing & Supplying High Density Polyethylene Pipe (HDPE Pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/Cm2 suitable for water supply which is available in all standards like ISI-4984, ISO-4427, DIN-8074 and various grades including transportation (taken avg 10%), taxes and duties (taken 2%), contractor profit and overhead charges (taken15%). HDPE pipe of materials grade PE80- PN-10 (dia in mm) (DWSD Page 45 Sl.No.112 M1028) |
| 4 | Porviding and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.50mm dia and weight not less than 1.5 kg. |
| 5 | Providing all fittings like union, tee, socket,elbow etc.(5% of item no 3) |
| 6 | Providing Plumber for fitting, fixing of fogger mist system and mounting of syntax tank at proper height and installing of pressure kit etc all complete as per building specification and direction of E/I. |
| 7 | Supplying 100 mm dia. submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and poly-propylene/ noryl impeller. Motor suitable for working on 220V±10%/415V±10%, 1PH/3 PH 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. (Make KSB/Crompton) Supplying rate should be increased by Rs. 200 per stage for pump with more 20 stage. (20 stage). 1.50 HP |
| 8 | Providing pump operator for operating motor for supplying water for Indra Varsha.1 shift x 30 days |
| 9 | (A) Provision of 1000M Length 40 mm Die GI pipe Laying & Taken out from WTP Basukinath to Darsaniatikar for water supply arrangement. Providing and Supplying of New G.I Pipes Providing and Supplying of 40 mm G.I Pipes (TATA mark or equivalent) as per IS-1239 (part-1)/2004 ISI Marked/Medium quality. |
| 10 | Providing and Supplying of 40 mm G.I Union Socket for Jointing of Pipes. |
| 11 | Providing PCC M-150 with nominal mix of (1:2:4) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion- BCD-5.3.1.2 |
| 12 | Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete BCD-5.10.2 (Part A 2.6) |
| 13 | Making long screw in G.I pipe including supplying and fitting Jam nuts and extra socket etc. all complete as per specification and direction of E/I.(Assuming 50 nos of new grooves are to be made)(DWSD 2022 ,3.1.14)40 mm GI Pipe- |
| 14 | Plumber or labour for laying and jointing and Taken out of G.I. Pipe in position all complete job. |
| 15 | Repairing of Existing Water Supply Arrangement in Different route of Kawanriya Path & Mela Kshetra by Changing of defunct of 1.50 HP Submersible Motor Pump on existing Scheme etc. at Police Shivir, Bus Stand & Kawariya Shivir on Basukinath Shrawani Mela 2026(A.) PLATFORM CONSTRUCTION E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) & disposal of excavated earth obtained to a distance up to 50 M including all lift leveling, ramming the foundation trenches removing root of trees, shrubs all complete as per approved design building specification and direction of E/I. JH SOR 5.1.127 nos x2.0x0.90x0.25M |
| 16 | Providing, coarse clean sand in filling foundation trenches/in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads, including all cost of materials, labour,royality & taxes all complete as per specification & direction of E/I. JH SOR 5.1.10 |
| 17 | Providing designation 75A one brick flat soiling filled with local sand including costs of watering taxes royalty all complete as per building specification and direction of E/I. JH SOR 5.6.1 |
| 18 | Providing P.C.C.M-150 in nominal mix of ( 1 : 2: 4 ) in foundation with approved quantity of stone metal graded– III (50 mm to 25mm size) chips 20 mm to 6mm size grade& clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, vibrating, striking,curing,taxes,& royalty all complete as per building specification and direction of engineer-in-charge JH SOR 5.3.3 |
| 19 | Providing 12mm, cement plaster (1:6) with 1.5mm tk punning with clean coarse sand of F-M 1-5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction E/I |
| 20 | (B.) STANDPOST CONSTRUCTION E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) & disposal of excavated earth obtained to a distance up to 50 M including all lift leveling, ramming the foundation trenches removing root of trees, shrubs all complete as per approved design building specification and direction of E/I. JH SOR 5.1.1 |
| 21 | Providing 75 B brick work in CM (1:6) in foundation /wall with approved quality of clean coarse sand of FM 2.5 including providing providing 10 mm thick mortarjoints, cost of screening of sand, raking out joints to 15 mm depth, cost of materials, labours, scaffolding, cost of curing with all leads and lifts of water, taxes, royalty etc all complete as per standard specifications and direction of the E/I. |
| 22 | Providing P.C.C.-M150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm is graded and clean coarse sand of F-M-- 2-5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, string, curing, taxes and royalty all complete as per building specification and selection Engineer in Charge |
| 23 | (C.) 1.5 HP Electric Submersible Motor Pump Set : Supplying 100 mm dia. submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and poly-propylene/ noryl impeller. Motor suitable for working on 220V±10%/415V±10%, 1PH/3 PH 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. (Make KSB/Crompton) Supplying rate should be increased by Rs. 200 per stage for pump with more 20 stage. (20 stage). (1.5 HP) |
| 24 | D.O.L. Starter with SS Enclosure with 220/380/415 Volt coil. 1.5 HP (1No. Working ) |
| 25 | Supplying , Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed . DW&S (146, M1062) |
| 26 | Providing safety wire of 5 mm dia. PVC coated of approved make. |
| 27 | 3 Core PVC insulated, PVC sheathed aluminum armored cable. 3 core 10 sq mm |
| 28 | Supplying fitting and fixing Pump and panel board with all complete as per building specification and direction of E/I. |
| 29 | Providing Electrical Connection charge for JVBNL and Electric Charge |
| 30 | (D.) Plumbing & Fitting items :Providing & Supplying High Density Polyethylene Pipe (HDPE Pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/Cm2 suitable for water supply which is available in all standards like ISI-4984, ISO-4427, DIN-8074 and various grades including transportation (taken avg 10%), taxes and duties (taken 2%), contractor profit and overhead charges (taken15%). HDPE pipe of materials grade PE80- PN-10 (dia in mm) (DWSD Page 45 Sl.No.112 M1028) 40mm dia (Column Pipe) |
| 31 | Supplying all materials, labours and laying PVC pipes of approved make in wall with red lead and yarn with G.I socket and screw joints and cutting pipes to sizes and threading ends where necessary etc. all complete as per specification and drirection of E/I including the cost of G.I. Pipe. 20mm dia Pipe |
| 32 | 15mm dia Pipe |
| 33 | Supplying and fixing G.I fittings of approved make all complete as per specification and direction of Engineer-in-charge.Union Socket 32mm dia |
| 34 | Reducing tee plain 32x15mm dia |
| 35 | Elbow 15mm dia |
| 36 | Socket 15mm dia |
| 37 | Nipple 15mm dia |
| 38 | Supplying fitting & fixing C.I. body brass spindle Push / bib cock. |
| 39 | Supplying & Fixing gun metal full way valve of approved make all complete as per specification & direction E/I. 32 mm dia dia weight not less than 700gms. |
| 40 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job as per direction of E/I.(a) Cement-5 Km.(Avg.) |
| 41 | (b) Sand-10 Km.(Avg.) |
| 42 | (c) Stone-Chips- 35Km.(Avg.) |
| 43 | (e) Bricks-10 Km.(Avg.) |
| 44 | Providing pump operator for operating motor for supplying water 1 shift x 30 days |
| 45 | Add 18 % GST |
| 46 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
