|
| 1 | Supplying and fixing 415 V, 100 A TPN SFU open execution in existing SS enclosure/ cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:- L&K / Siemens / ABB as approved by E.I.C) |
| 2 | Supplying and fixing of 100A, 4 way double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.Incoming-01 no.- 63A 4P MCCBOutgoing- 02 nos.-40A TP MCB 06 nos- 6-32A SPMCB (Make:-Legrand/seimens/L&K as approved by E.I.C) |
| 3 | Supplying and fixing double-door (2+8) way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.Incoming -1 no. DP MCB Isolator- 40A, Outgoing - 8 nos 6-32A SP MCB.(Make: Legrand/seimens/L&K as approved by E.I.C) |
| 4 | Supplying and fixing 4way double door sheet steel (16SWG), powder coated cable end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. |
| 5 | Supplying and fixing 6-32A DP MCB with SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.(Make: Legrand/seimens/L&K as approved by E.I.C) |
| 6 | Supplying and fixing 40A FP MCB with SS enclosure with IP-20/30 protection, powder coated provision for four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.(Make: Legrand/seimens/L&K as approved by E.I.C) |
| 7 | Supply of 4 Core 35 Sqmm XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] |
| 8 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mendinggood damages and painting. |
| 9 | Distribution wiring in 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Make: KEI/Havells/ Polycab) in 20mm/suitable size PVC rigid conduit 'FR' ( Make: Precision/Polycab MMS / HMS) incl. necy. fittings as required. |
| 10 | 2 x 22/0.3 (1.5 sq. mm) + 1 x 22/0.3 (1.5 sq. mm) ECC |
| 11 | 2 x 36/0.3 (2.5 sq. mm) + 1 x 22/0.3 (1.5 sq. mm) ECC |
| 12 | 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC |
| 13 | 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC |
| 14 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Make: KEI/Havells/ Polycab) in 20mm size PVC rigid conduit 'FR' ( Make: Precision/Polycab MMS / HMS), with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Legrand/Approved make) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.Avg run 8 mtr. |
| 15 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Make: KEI/Havells/ Polycab) in 20mm size PVC rigid conduit 'FR' ( Make: Precision/Polycab MMS / HMS), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Legrand/Approved make) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.On Board |
| 16 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 17 | Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. |
| 18 | Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) |
| 19 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 20 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand/Approved make) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 21 | Fixing 30 cm (12\\") exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust. |
| 22 | Supply & Fixing 30cm (12'')GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) |
| 23 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand/Approved make) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 24 | SITC of PVC loop Box having with mm thickness with front side opening door and locking arrangement. Junction box having 180x180x120mm dimension with power terminal included.(Make: Syntex/ AKG/ Supreme) |
| 25 | Supply & Delivery of 3 core 06 sqmm of 1.1 KV grade alluminium XLPE, PVC/ armoured LT cable.(Make: Gloster/RR Kabel/KEI/Polycab/Havells) |
| 26 | Laying of cable 3 core 06 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 27 | Supply & fixing of LED Bulk head fitting (Make - Philips WT140W LED7S CW PSU S1 PC /Wipro, Cat No. LW07-141-XXX-57-G1) on wall / ceiling by screws etc. |
| 28 | Supply & Delivery of 240V, 18/ 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] |
| 29 | Supply and Delivery of 4 feet Industrial box type Single LED tube batten/ mounting rail (rust free) suitable for double TLED lamp. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] |
| 30 | Supply & Delivery of 240V, 120 Watt LED street lights with optic lens and polycarbonate diffuser having following wattage, in white powder coated pressure die cast aluminium housing with IP 66 protection & incl. 10 kV SPD, with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 110 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] |
| 31 | Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body of 300 mm (12\\"), 4 Blade, RPM ≤ 1420 , Wattage ≤ 90 Watt, Sound level ≤ 56 dB, Air Displacement (In CMH) ≥ 1120 (Make- EPC/ USHA/Orient CROMTON) [ISI mark, IP55 rated] |
| 32 | Supply & Delivery of 230V, 1-Ph, Sweep Size- 1200 mm (48\\"), Wattage ≤ 55 Watt, R.PM ≤ 380, Air Delivery ≥ 210 C.M.M, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton / Usha / Orient) [BEE star rated] |
| 33 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 core 35 Sqmm Al. Armoured XLPE/PVC armoured cables. |
| 34 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 3 core 06 sqmm. |
| 35 | Finishing the end of 4 core 35 Sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : |
| 36 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials for 3 core 06sqmm. |
| 37 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 38 | 1.5Sqmm |
| 39 | 2.5Sqmm |
| 40 | 4.0 Sqmm |
| 41 | 6.0Sqmm |
| 42 | 10.0Sqmm |
| 43 | Excavation of soil for installation of Earth Electrode and filling & ramming. For soft soil. |
| 44 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA-Medium GI pipe. |
| 45 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 46 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 47 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. |
| 48 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 49 | Supply and Fixing of poceline post insulator(SP65 of ASIAN Electrical and Electronics) suitable for passing for earth conductor (as approved by EIC) with two nos of screw on wall and suitable arrange ment for fixing of earth continuty flat. |
| 50 | Supply & fixing of interval timer to the exhaust fan incomig supply for smooth running. [ON-15 min & OFF-10Min] NS |
| 51 | S & F Timer Control Unit for compound light with following accessories:- i) 2+14-way SPNDB Box (Legrand/L & K)-1 no. ii) 25A DP MCB (Legrand/L & K)-1 no.iii)Digital 24 hour time switch (Make-GIC) -1no. iv)25A 2-pole contactor (L&K: MNX22/230V)-1no. v)Melamine terminal block-2 nos. vi)LED indicating lamp (L&K: SIL R 240V)-2 no. vii)2X4sq.mm+2.5sq.mm copper wire -2 mtr. viii)1.5sqmm copper wire-3 mtrs. ix) 3 way ON-OFF-ON toggle switch -- 1 no. x) cu socket of 4/2.5/1.5 sq mm -- L.Sxi) Single Phase AC starter (cat no-C 12M01 H)xii) Ammeter- 01(Make-L&K/ABB/Crabtree) with complete interconnection as required as per direction of EIC. |
| 52 | Add GST @18% on item 01 to 42 |
| 53 | Add LWC@1% Item 01 to 43 |
| 54 | Terms and condition |
| 55 | The Agency must procure the materials from the Manufacturere/ OEM or from their authorised sales channel so that the standard warranty/ support of the Manufacturer/ OEM becomes applicable to the products to be delivered and installed by them. |
| 56 | If any refurbished material is supplied and installed, penal action will be taken as per existing rules. |
| 57 | Defect liability period 1(one) year. |
| 58 | [Make and model no. of each and every item to be approved by EIC] Rate must be incl of all taxes Please Enable Macros to View BoQ information |
