Tender For Construction Of Multipurpose Stadium At Dobal In Dhamnagar Block In The District Of Bhadrak For 2026-27., Bhadrak-Odisha

TDR : 56177461

Tender Notice
BOQ

11 Days Left

Bhadrak , Odisha

Tender Brief : Tender For Construction Of Multipurpose Stadium At Dobal In Dhamnagar Block In The District Of Bhadrak For 2026-27.

Document Fees
₹ 10000 /-

EMD
₹ 766072.0 /-

Tender Value
₹ 7.66 Crore /-

Submission Date
08-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earthwork excavation in foundation in hard soil within initial lead of 50m and intial lift of 1.5m including rough dressing and levelling the bed & as per specifiction approved by the E.I.C.GYM BLOCK
2	VIP BLOCK
3	GALLERY
4	SITE DEVELOPMENT
5	Filling foundation and plinth with sand well watered and rammed (per Cum.)including all costs of labour, T&P etc. complete as per direction of EIC.GYM BLOCK
6	VIP BLOCK
7	GALLERY
8	SITE DEVELOPMENT
9	Filling foundation & plinth with excavated earth materials etc complete. etc. complete as per direction of the Engineer in charge.GYM BLOCK
10	VIP BLOCK
11	GALLERY
12	Providing plain cement concrete ( 1:3:6 ) in foundations using 40 mm nominal size h.g. metal including watering and curing etc. complete as per direction of the Engineer in charge.GYM BLOCK
13	VIP BLOCK
14	GALLERY
15	SITE DEVELOPMENT
16	R.C.C. work of Grade- M 250 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including centering & shuttering,hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer incharege but excluding the cost and conveyance of HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position.(GYM BLOCK) Foundation
17	Plinth Beam
18	Column (Ground Floor)
19	First Floor
20	Lintel(Ground Floor)
21	First Floor
22	Chhaja (Ground Floor)
23	First Floor
24	Roof Beam (Ground Floor)
25	First Floor
26	Roof Slab (Ground Floor)
27	First Floor
28	Stair case (Ground Floor)
29	First Floor
30	VIP BLOCK (Foundation)
31	Plinth Beam
32	Column (Ground Floor)
33	First Floor
34	Lintel (Ground Floor)
35	First Floor
36	Chhaja (Ground Floor)
37	First Floor
38	Roof Beam (Ground Floor)
39	First Floor
40	Roof Slab (Ground Floor)
41	First Floor
42	Stair case (Ground Floor)
43	First Floor
44	GALLERY (Foundation)
45	Plinth Beam
46	Column
47	Roof Beam
48	West Slab
49	SITE DEVELOPMENT (R.C.C. foundation,R.C.C. Drain Wall & Plinth Beam)
50	Column
51	Roof Beam
52	R.C.C. Floor and Roof slab, landing, balconies, projecting, sun shades and chajjas up to 4.3Mtr. Height.
53	Supplying, fitting and placing uncoated HYSD bar reinforcement straightening, cutting, bending, placing in position HYSD and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading,, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars as per direction of the Engineer in charge.(GYM BLOCK)(Ground Floor)
54	First Floor
55	VIP BLOCK (Ground Floor)
56	First Floor
57	GALLERY
58	SITE DEVELOPMENT
59	Fly ash brick masonry using Fly ash bricks of size 25cm x 12 cm x 8 cm having crushing strength not less than 75 kg. Per Sqr. Cm. In cement mortar of mix (1:6) with cement and screened and washed sharp sand for mortar after immersing the bricks for 6 (six) hours in water before use in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, conveyance, loading unloading, royalties and taxes of all materials and cost of all labour, sundries required for the works etc. complete in all respect as directed by the Engineer-in-Charge. GYM BLOCK (In Foundation & Plinth)
60	In Superstructure (Ground Floor)
61	First Floor
62	VIP BLOCK (In Foundation & Plinth)
63	In Superstructure (Ground Floor)
64	First Floor
65	GALLERY (In Foundation & Plinth)
66	In Superstructure
67	SITE DEVELOPMENT
68	6mm thick cement plaster (1:4) to ceiling R.C.C surface including all cost of labour complete as per direction of E.I.C.GYM BLOCK (Ground Floor)
69	First Floor
70	VIP BLOCK (Ground Floor)
71	First Floor
72	GALLERY
73	12mm thick cement plaster in CM (1:6) on brick work both side including all costs of labour etc. complete as per direction of E.I.C.GYM BLOCK (Ground Floor)
74	First Floor
75	VIP BLOCK Ground Floor
76	First Floor
77	GALLERY
78	SITE DEVELOPMENT
79	16mm thick cement plaster in CM (1:6) to inner wall surface on brick masonary in side including all costs of labour etc. complete as per direction of E.I.C.GYM BLOCK (Ground Floor)
80	First Floor
81	VIP BLOCK (Ground Floor)
82	First Floor
83	GALLERY
84	SITE DEVELOPMENT
85	Finishing Surface of walls with Acrylic putty ( water based ) of approved make & finished smooth & even surface to receive painting including all cost etc .complete. as directed by the Engineer-in-charge.GYM BLOCK (Ground Floor)
86	First Floor
87	VIP BLOCK (Ground Floor)
88	First Floor
89	GALLERY
90	SITE DEVELOPMENT
91	Finished wall surface with Weather Coat Paint two coats including ost of all materials and labour etc. complete as directed by the Engineer-in-charge.GYM BLOCK (Ground Floor)
92	First Floor
93	VIP BLOCK (Ground Floor)
94	First Floor
95	GALLERY
96	SITE DEVELOPMENT
97	Wall painting 2-coats with plastic emulsion paint of approved shade on new work 1coats to give an even shade etc. complete as directed by the Engineer-in-charge.GYM BLOCK (Ground Floor)
98	First Floor
99	VIP BLOCK (Ground Floor)
100	First Floor
101	GALLERY
102	SITE DEVELOPMENT
103	Supplying fitting fixing of M.S.Grill using 12mmx12mm size MS square bars, 20mmx5mm MS flats, MS angles of approved size for Grill gate, PCC(1:2:4) for clamp fixing cost & conveyance of all materials, labours , T&P, all fabrication, erection and fitting in position etc all complete as per direction of E.I.C. GYM BLOCK
104	VIP BLOCK
105	SITE DEVELOPMENT
106	Providing two coats of enamel paiting over one coat of priming including all costs of labour etc. complete as per direction of E.I.C.GYM BLOCK
107	VIP BLOCK
108	SITE DEVELOPMENT
109	Fixing tiles in floors treads or steps and landing (Vetrified tile) on 25mm thick bed of cement mortar (1:4) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc. complete as per direction of E.I.C. GYM BLOCK (Ground Floor)
110	First Floor
111	VIP BLOCK (Ground Floor)
112	First Floor
113	SITE DEVELOPMENT
114	Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc. complete as per direction of Engineer-in-Charge. GYM BLOCK (Ground Floor)
115	First Floor
116	VIP BLOCK (Ground Floor)
117	First Floor
118	SITE DEVELOPMENT
119	Fixing Ceramic tiles in floors,treads and landings on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge. GYM BLOCK (Ground Floor)
120	First Floor
121	VIP BLOCK (Ground Floor)
122	First Floor
123	GALLERY
124	Providing and fixing 30cm x 30cm special plain series ceramic wall tiles of premiumgrade having thickness 6.5 mm to 6.7 mm conformingto IS 13755 in dados, skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments including cost, conveyance, cost of all labours, materials, T & P, sundries etc. as required to complete the work as per direction of Engineer in charge.GYM BLOCK (Ground Floor)
125	First Floor
126	VIP BLOCK (Ground Floor)
127	First Floor
128	GALLERY
129	Supplying, fitting and fixing GraniteSlab (0.4 to 1.00 Sqm ) in floors of approved make laid on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. GYM BLOCK (Ground Floor)
130	First Floor
131	VIP BLOCK (Ground Floor)
132	First Floor
133	Fixing Kota tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge.(Gallery)
134	Factory made single extruded WPC (Wood Polymer Composite) solid door/window frame of size 65 × 125 mm, of approved make, colour, and design, having smooth outer texture and density not less than 650 kg/m³, fixed in position with dash fasteners/anchor fasteners, including cost of all materials, labour, T&P, conveyance, royalties, taxes, etc., complete as per direction of the Engineer-in-Charge. GYM BLOCK
135	VIP BLOCK
136	GALLERY
137	SITE DEVELOPMENT
138	35mm flush door shutters both side laminated with 4mm thick veener with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. But excluding the cost of iron fittings as per specification approved by the Department.GYM BLOCK
139	VIP BLOCK
140	GALLERY
141	SITE DEVELOPMENT
142	UPVC Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm). GYM BLOCK
143	VIP BLOCK
144	SITE DEVELOPMENT
145	Providing, supplying and fixing BESCO Make Cubicle – TITAN SS type made of 12 mm thick HPL compact laminate in single standard colour, of size 1000 mm (W) × 1550 mm (D) × 1980 mm (H) including 150 mm bottom gap, complete as per approved drawings. Door size 1750 mm × 600 mm and divider height 1775 mm. Cubicle to be fitted with Merino make stainless steel accessories (Grade 304) including SS channels, top rail, door stopper, coat hook, privacy thumb turn with occupancy indicator, door knob, spring-loaded butt hinges, rubber lining, screws and wall plugs, complete with SS adjustable foot (Grade 316). Installation to include cutting, drilling, fixing, alignment and making good. Permissible warpage: max 3.0 mm per 1000 mm as per EN 438. Rate inclusive of all materials, labour, transportation and incidentals, complete. GYM BLOCK
146	4.0cm thick grading concrete in floor of propertion (1:2:4) over roof slab using 12mm to 16mm size CB chips approved quality including cost, conveyance,taxes & royality of all materials and labour with T&P etc. complete in all respected as per direction of the Engineer in charge. GYM BLOCK
147	VIP BLOCK
148	Supplying all materials,labour, T&P and fitting and fixing of 30 mm WPC door shutter with door frame of 50 mmX75 mm size of approved quality including fixing materials including cost, conveyance, cost of all labours, materials, T & P, sundries etc. as required to complete the work as per direction of Engineer in charge.(Gallery)
149	SITE DEVELOPMENT Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.
150	Construction of granular sub-base by providing Grading VI close graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401
151	Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
152	Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
153	Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.
154	Providing and laying bituminous macadam with hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 504 complete in all respects.
155	Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects
156	SYNTHETIC SPORTS SURFACESeamless point-elastic sports floor for outdoor Basketball, Volleyball, Handball, Tennis court. The system consists of a high resilient granular base with a polyurethane self-levelling elastic wear layer covered by a wear-resistant mat top coat finish. The PU-Sport© system is tested according to the latest leading standards: EN, DIN. including the following: (i) 7 mm thick in-situ Rubber Granule Elastic Layer (ii) 2 mm of PU layer which includes 1st Layer of two-component polyurethane pore sealer and 2nd Layer of two-component polyurethane self-leveling wear coat that ensures exceptional durability. And 3rd Layer two component aliphatic polyurethane topcoat withvery high abrasion resistance, as well as stain resistance.(ii) Line Marking as per the requirement of the games.only,
157	Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.
158	Supply & Installation of synthetic all weather acrylic material approved by International Tennis Federation (ITF) having nine
159	Tennis Court Pole.Supply and fix Net poles with internal winding with sleeves-Indian complete for Tennis court. Pole & fixing drawing as per international Standards.Make Freewill / SPORT TECH/ uphos
160	Supply and Laying of geo synthetic texile @ 200 GSM
161	Providing, laying, spreading and compacting graded stone aggregate to laying in uniform layers in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density etc.including cost of all labour,material,conveyance,loading and unloading,machinery charges all complete as per the direction of Engineer-in-charge.
162	Supplying , stacking and spreading of good earth at site within initial lead including royalty and carriagetransporting to site, spreading, grading to required slope and compacting to meet requirement.
163	Supplying , stacking and spreading of root zone sand as per USGA standard at site including royalty and carriage and Laying of root zone sand on the top of aggragate as per desired level
164	Supply and laying of labour and material for Base preparation of grassing and fertilizer apllication in the required proportion specified or directed by the Officer-in-charge.
165	Supply & Planting Bermuda grass on site by Planting method directed by engineer in charge. The grass must be weed fee. Rate including all required fertilizer, pesticider & Chemical etc. complete for growing the turf. Spec. No.:- As directed by Engineer in charge. (Including cost of 6 month of Maintenance of football Ground)
166	Providing and laying of hot applied thermoplastic paint 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
167	Providing and laying in trenches DWC perforated pipe@ 100mm dia conforming to IS 16098 (Part-2) with all fitting accessories and jointing, including testing as per specification complete. (Earth work in trenches to be measured and paid fo separately).The cost inclusive of labour,material,fitting and fixing,conveyance,loading and unloading etc all complete as per the direction of Engineer-in-charge.
168	Providing and laying in trenches PVC non perforated pipe @160mm dia conforming to IS 4985-2000 with all fitting accessories and jointing, including testing as per specification complete. (Earth work in trenches to be measured and paid fo separately)The cost inclusive of labour,material,fitting and fixing,conveyance,loading and unloading etc all complete as per the direction of Engineer-in-charge.
169	Design, Supply, Installation, Testing and Commissioning of manual Irrigation/sprinkler Systeam as per vendor specidication and details as instructed by the Engineer in charge
170	Construction of granular sub-base by providing Grading VI close graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401
171	Providing and dibbling of good quality lawn of the specified species in lawn area, with clods broken completely, and removal of debris and unwanted materials. Soil mixture shall be of 15% manure, 20% river sand,and 65% red earth. The filled soil shall be mixed with neem cake/Pongamia cake, pesticide in the required proportions.Bermuda TIF419 Grass/ Evergreen Bermuda as per site condition and design requirements
172	Pace Friendly pitch Pitch area: supply and installation 12 mm thick dense, Knit De Knit polypropylene fibres surfaces over 6 mm thick shock pad for Cricket Wicket / Pitch area, permanent installation with adhesive. Pile Height 6 mm high Pile Product Weight should not less than 1,550gsm AS PER ECB Make :- PPJ Playrite U.K. or equivalent
173	Providing, spreading and compacting approved murum / clay for base layer of traditional Kabaddi court, including watering, rolling and compaction to required camber/levels, complete, as directed by the Engineer-in-Charge.
174	Court marking with lime / white paint by marking Kabaddi court lines including boundary lines, baulk line, bonus line and lobby lines, using lime powder / approved white synthetic paint, complete as per Kabaddi court norms and layout drawings, as directed by the Engineer-in-Charge.
175	Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechine vibrated free cast interlocking pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
176	Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
177	Providing and constructing ornamental dressed masonry for gate pillars and returns, including selection of approved bricks, hand dressing to required profile, maintaining true faces, jambs, plinths and coping, laid in cement mortar 1:3, with joints properly raked and finished, including provision of temporary supports, scaffolding, curing, finishing and making good the work, complete as per approved drawings, CPWD specifications and as directed by the Engineer-in-Charge.
178	Providing fixed basketball outdoor posts with 3.2 mtr. umbrella projection with 200 mm square mild steel pipe powder coated of approved make with front side safety padding of 5.5” thick foam blue colour and 30mm transparent acrylic 180x105x 30mm of approved make with international standard double die frame aluminum anodized/steel powder coated with built in brackets for mounting including dunking rim solid 20mm thick with three spring mechanism box packing of approved make with nets of regulation size 45 cm, cup shape of heavy duty nylon silky mix white coloured cord. (The cost of earthwork, concrete, labour for installation of the posts to be included in the rate).Make Freewill / SPORT TECH/ uphos
179	P.H Work.Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/Oriplast 50mm dia
180	40mm dia
181	32mm dia
182	25mm dia
183	20mm dia
184	Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/Oriplast (40mm dia for Drinking & Flushing from source to GL)
185	40mm dia for Drinking & Flushing from GL to OH Tank
186	Providing all materials, labour, T&P for laying/fixing of following dia uPVC Aquasafe pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/Oriplast 50mm dia
187	Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC.
188	Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.(For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall)
189	For 75mm to 150mm dia pipe to pass in 250mm thick wall
190	Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge.
191	Providing all materials, labour, T&P for fitting & fixing of following Bronze Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO/LEADER (50mm dia Bronze ball valve)
192	40mm dia Bronze ball valve
193	32mm dia Bronze ball valve
194	25mm dia Bronze ball valve
195	Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china Floor mounted water closet Rimless (European pattern)confirming to IS 2556 : PART-8-2004 ,with S Trap with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. (As per Model- Jaquar VGS-WHT-81853S300UF or Equivalent) Make : JAQUAR/GROHE/JOHNSON/ROCA
196	Supply all materials and labour for fitting and fixing of following size white glazed vitreous china Half Padestal wash hand basin of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. including all taxes, duties, transportation etc. all complete as per direction of EIC. (As per model - Jaquar- Basin Model: FNS-WHT-40801and Half Pedestal Model: FNS-WHT-40305 or Equivalent) Make : JAQUAR/GROHE/JOHNSON/ROCA
197	Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge.(As per Jaquar Model No: URS –WHT -13261OrEquivalent) (Make : JAQUAR /GROHE /JOHNSON /ROCA)
198	Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin of size 650mmx350mm with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. (Make : JAQUAR/GROHE/JOHNSON/ROCA/HINDWARE)
199	Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook (As per Jaquar Model Range:ALD 565 or Equivalent)
200	15mm dia Angular Stop Cock with wall flange (As per Jaquar Model Range:KUP-CHR-35053PM or Equivalent)
201	Carriage of materials and fixing charges
202	CP soap dish holder
203	C.P. Toilet Roll holder with stainless steel flap (As per Jaquar Model Range:ALD 565 or Equivalent)
204	Towel Ring Round
205	150mmX150mm square trap with 5mm Border
206	32mm Half Thread Waste Coupling
207	32mm Full Thread Waste Coupling (As per JaquarModel No: 6242 or Equivalent)
208	15mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers. (As per (Jaquar) Range: Allied or Equivalent)
209	Extension Piece (15 x 25 mm)
210	32mm dia C.P. Coat Hook (Double)
211	32mm dia CP on Brass Bottle Trap
212	Frame less Toilet Mirror with Studs (Make: Saint Gobain)
213	Pillar Cock (As per Jaquar OPP-CHR-15011BPM Opal Prime Chrome Single Lever Basin Mixer with 450 Mm Braided Hose or Equivalent)
214	Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange (As per Jaquar Urinal Flush ValveModel No: PRS-CHR-077 or Equivalent)
215	Urinal Spreader (As per –Jaquar Model No: 6320 or Equivalent)
216	Providing all materials, labour, T&P for fixing Overhead Shower ø105mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated)with Rubit Cleaning System & Shower Arm 600X25X25mm with Flange. (Shower Arm Model No: SHA –483 or Equivalent Overhead Shower – Product Range: Multi‐function Showers or Equivalent)
217	Providing all materials, labour, T&P for fixing Wall mixture for shower (As per model Jaquar FUS-CHR-29273 UPR, 2 In1 Fusion Wall Mixer or Equivalent)
218	Towel Rack with Lower Hanger (Stainless Steel) with 3 hooks (Chrome Finish) (As per Jaquar Model No: AHS-CHR-1581H or Equivalent)
219	Shower basket small (Chrome Finish)Model No: ACN-CHR-1177N or Equivalent
220	Fresh Colour UMP Systems FMRSUMPPNLZZSS00001 (HSN CODE: 48239019) URINAL MODESTY SS Thickness of Compact Laminate : 12 mmColour of HPL Boards: Single ColourSize of UMP : 500mm (W) X 1200 mm(H) Overall Height Of Cubicle : 1850 mm(Including bottom Gap of 650mm) Accessories: Standard – Merino MakeStainless Steel - 304 Grade accessories) a) Right Angle Bracketsb) S.S.Screws 304 G & P.V.C Wall Plugs SPECIAL NOTE - Warpage Criteria is 3.0mm/1000mm for MRS panels as per ENstandard- 438.
221	Providing all materials, labour, T&P for fitting and fixing of standard size HPL Toilet Cubicle of approved make in all toilets (Make: Greenlam/Merino) Model: 21187 Champagne for fixed panels, Model: 21027 Irish Cream for doors
222	Providing all labour, T&P and machinaries for installation,commissioning of Three phase sensor with level indicator (Drinking & Flushing OHT) and cables etc as per direction of EIC.
223	Storage Cooler cum UV Water Purifier 120 lit Capacity40 ltr per hr cooling capacity, 120 ltr storage (40 ltr warm, 40 ltr cold, 40 ltr normal)Model- AG Green Pure Chill 120 PSS UV (Eureka Forbes/Zero B (Ionexchange)
224	110mm dia soil pipe
225	110mm dia waste pipe
226	110mm Pushfit Coupler
227	110mm x110mm P-Trap
228	110mmx87.5º bend
229	110mmx87.5º door bend
230	110mmx45º bend
231	110mm dia Single Tee
232	110mm dia Single Tee with Door
233	110mm dia Single 'Y'
234	110mm dia Single 'Y' with Door
235	110mm dia Double 'Y'
236	110mm WC connector straight with lip ring
237	PVC Clamp Suitable for 110mm dia pipe
238	110mm dia Vent cowl
239	110mm Socket plug
240	Multi floor trap
241	Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-A) For rain water Stacking pipe in the Duct(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make: ASTRAL/ASHRIVAD/SUPREME/ORIPLAST (110mm dia Bend (87.5 degree)
242	110mm dia pushfit coupler
243	110mm dia pipe
244	110mm dia Bend (87.5 degree) Door bend
245	Vertical Grating 150x150mm for Rain water gutter on terrace ,opening to 110mm dia Rain water pipes
246	Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '100' mtr.
247	Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.
248	Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC.
249	Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.
250	Providing all materials required for construction of brick masonry chamber for encasing the production well with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick on base & 100mm thick on top of the chamber, encasing the annular area of casing pipe with cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm height including form work, filling the inside cavity with sand, C.C. 1:2:4 on top of the chamber of 50mm thick, 12mm thick cement plaster 1:4 on outer wall & top surface, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed with smooth finishing. The height of chamber should be 450mm from G.L. The cost inclusive of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge. (Outer size 1400mm x 1400mm x 1200mm ht. chambers)
251	Installation of Submerssible pump set in the Bore-Well. Supply, Installation, testing & commissioning of 3-phase, 50Hz Submersible pump set of required head 100 mtr & discharge 5 Lps including HDPE delivery pipes of 10 Kgf/cm2 of material grade P.E.-80,S.S Tapper(Two nos each) of 0-.45 mtr Long,MS Supporting Clamp with MS Nuts and Bolts alongwith 200 mm dia Tube-well cover and cap suitable for above Pump-set and Suitable size of Four core flat cable of 120 mtr with Bore bunched copper conductor insulated sheathed with PVC for Submersible Motor with voltage grade up to 415 Volt ,along-with 2 nos. of earthing 1.5 KW and 2 Hp confirming to IS-694/1990 of required length, control panel Star Delta with APFC and ATS arrangement & required accessories suitable for 200x150mm size Production Well ,control panel with Sensor arrangement to run the motor automatically according to Level of Raw Water Sump i.e 50% of Volume& required accessories suitable for 200x150mm size Production Well etc all complete as per specification & direction of EIC. Make:-Willo/Groundfos/Kirloskar 2sets (1w+1s)
252	Installation of Centrifugal Pump set .Supply, installation, testing & commissioning of Centrifugal Pump set (Monobloc) with pressure tank. The capacity of each pump, Total Head-35m, Discharge-3m3/hr,Hp=1, with 3-phase 50Hz, TEFC induction motor coupled with a common base with electrical control panel suitable for the pump set, including construction of concrete foundation, suction & delivery piping arrangements, fixing of required sizes & nos.of Bronze horizontal Check valves (pressure ratting PN-1.0) like Bronze Ball Valve foot valve with strainer etc with sensor arrangement for filling of OH Tank automatically. all complete as per the technical specification & direction of EIC. Make:-Willo/Groundfos/Kirloskar 2SET (1w+1S)
253	Supplying and Fixing of Sintex Double Layer (ISI Marked) over head water storage tank with following capacities conforming to IS : 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto required elevation and placing the tank to the required position etc all complete as per direction of Engineer-in-Charge.(Make -Sintex) (5000 Litres Capacity Triple Layer Tank white for Drinking& Flushing &waterfountain)
254	2000 Litres Capacity Triple Layer Tank white for Drinking& Flushing &waterfountain
255	Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of 110mm square PVC Gully Trap with grating and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royality, cost, conveyance etc. all complete as per specification & direction of EIC.(300mm x 300mm x upto 450mm deep gully trap.)
256	Providing all materials, labour T&P for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of CI manhole cover with frame (100 kg) for opening of 600x600mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.(Inner size 750mm x 750mm x 500mm depth.)
257	PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling the foundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame ( heavy duty) for clear opening 560mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification & direction of EIC.(Manhole chamber of Inner size 800mmx900mmx 600mm depth.)
258	Extra for every additional depth of 0.10mtr. or part there of manhole size 800mmx900mm from 600mm depth upto 1500mm depth.
259	Gravity Sewage Disposal System . Earth work : Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of beddingand hunching for RCC NP3Spigot socket concrete pipes of the following internal diameter including curing complete as per specification & direction of E-i-c. For 150mm dia pipe
260	Providing all materials, labour, T&P and laying of Centrifugally cast (spun) RCC non pressure pipes of class NP3 with socket & spigot ends confirming to IS-458 with ISI mark in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) including rubber gasket as per IS-5382/1985 with ISI mark with all taxes & duties etc. all complete as per specification & direction of EIC. (Excluding cost for earth wok, back filling which will be paid separately). 150mm (NB) dia NP 3 RCC S/S pipe
261	Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA,AKG. (50mm dia for land scape irrigation from source to GL)
262	20mm dia forlandscapeirrigationfrom
263	Septic Tank. Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.(Upto 1.50m initial lift)
264	From 1.50m to 3.00m lift
265	Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
266	Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
267	Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
268	Providing all materials, labour, T&P for laying R.C.C. M-25 having minimum cube strength of300 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge. & Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
269	(A)R.C.C. walls and fins including attached pillasters.
270	(B)R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height.
271	(C)R.C.C. Beams, columns, grider and bressmer etc.
272	(D)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
273	Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
274	Providing, fitting & fixing of following sizes of precast factory made RCC man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC. (SFRC Man hole cover with frame 560mm frame with MHCover)
275	Providing, fitting & fixing of Poly Propylene man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
276	Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe (Type-B) of approved make confirming to IS-13592/1992 with Vent Cowl including construction of cement concrete pedestal (1:2:4) of size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
277	Providing, fitting & fixing of 110mm dia S.W.R Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
278	Providing all labour, T&P for benching & making Channel for inlet & outlet chamber.
279	Providing all material, labour & T&P for filling the both inner & outer surface of soak pit with 40mm size hard granite hand broken metal etc. complete including lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
280	Providing all material, labour, T&P for Fly ash Brick masonry work using Fly ash of 25cm X 12 cm X 8 cm size having crushing strength not less than 75Kg/Sqcm. in cement mortar (1:4) including cost, conveyance, taxes, royalties, loading and unloading of all materials and labour and scaffolding, watering, curing T&P etc., complete as per the specification & direction of the Engineer-in-charge. (Foundation & Plinth)
281	Providing all materials, labour, T&P for laying R.C.C. M-20 having minimum cube strength of 200 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge. Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
282	Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC.(12mm thick C.P. 1:4 outersurface)
283	12mm thick C.P. 1:4 with punning innersurface
284	12mm thick C.P. 1:4with punning and bitumen painting over wall top.
285	12mm thick C.P. 1:3 with punning
286	Providing all materials, labour, T&P for Recharge pit (2m dia with 2m deep) including earthwork, filling making good with borewell upto 15 m deep with all the works as per direction of engineer in charge
287	Electrification. Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. Make: Conduit:AKG/Anchor/Precision/NorpackWire:KEI/Finolex/Havells/PolycabSwitch & socket: egrand(Myirus)/Crabtree(Athena)/Honeywell (Blanze) Single light point controlled by one 6A switch or first light point of group control.
288	Subsequent point of group control
289	Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required.
290	Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board.
291	Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required.(1 nos 6 Amp 3-pin socket with 6 Amp switch.)
292	2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.
293	Supply, installation, testing & commissioning of 15 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 15 /16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.
294	Supplying, installation, testing & commissioning of 25 amp modular socket outlet on surface or in recess, on 1 Nos two module GI box with plate etc. complete as direction of Engineer-in-charge.
295	Supplying and fixing of Blanking plate.
296	Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
297	Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.Make-KEI/Finolex/Havells/Polycab (2X1.5 + 1X1.5 sqmm FRLS Cu wire (for UPS circuit wiring)
298	2X2.5 + 1X2.5 sqmm FRLS Cu wire (for Light plug & 6A power circuit wiring)
299	2X4 + 1X4 sqmm FRLS Cu wire (for 16A power plug circuit wiring,AC wiring)
300	4X6 + 2X6 sqmm FRLS Cu wire (submain FOR PDB&LDB)
301	Supplying and fixing of wireless call bell/buzzer suitable ,complete as required(best quality as approved by EIC)
302	SITC of Recessed/surface 2'/2'Mounted Led Down Lighter comprising of 30W LED with non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make-Philips/panasonic/Havells/Crompton
303	SITC of Recessed/surface Mounted Led Battern comprising of 40W LED with non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make-Philips/panasonic/Havells/Crompton
304	SITC of Recessed/surface Mounted square Led Down Lighter comprising of 20W LED with non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make-Philips/panasonic/Havells/Crompton
305	SITC of Recessed/surface Mounted Led Down Lighter comprising of 12W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make-Philips/panasonic/Havells/Crompton
306	SITC of Recessed/surface Mounted Led Down Lighter comprising of 6W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make-Philips/panasonic/Havells/Crompton
307	SITC of surface Mounted Mirror Light comprising of 10W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make-Philips/panasonic/Havells/Crompton
308	Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Make : Crompton/ Orient/ Havells/Baja/Usha).(1200 mm sweep
309	Supplying, installation, testing and commissioning of Exhaust fan / fresh air fan with louvre. (Make -Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells) as required.(250 mm sweep fibre body fresh air fan)
310	UPS( FOR CCTV & EMERGENCY LIGHT ) Supply, Installation, Testing & Comissioning of 10 KVA Online UPS IGBT based True Online Smart gxtmt+ Online Double Conversion with DSP Control Technology for High Performance with Sinle phase I/P & Single Phase O/P with Up on 90 % Running load along MS Battery KBS Rack & Battery inter connection link with standard make GE/ Emersion-VERTIV/Numeric/ /Libert/ APC of accessories for installation.with Suitable Battery Bank for 30 min back up with Sealed Maintenance Free Battery. Make: Amararaja/ Exide/Amaron,open type powder coated racks for Battery as per the specification complete as per direction of Engineer in charge
311	DBS Supplying and fixing following way, TP and neutral/SP and Neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS)(4 way, Double door, TPN DB)
312	12 way,Double door, SPN DB(UPS DB)
313	Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required (63 Amps4P,100mA RCBO)
314	6 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
315	40 Amps2P,10kA MCB(C-CURVE)
316	Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
317	Supply and laying of 25/32mm UPVC trunking system and acessories.(Make:Legrand/MK(honeywell)
318	CCTV Supply and Installation of 16CH. 2 SATAHigh decoding capability for 4K Ultra HD (UHD) viewing and recording • View 1 to 8channels simultaneously with synchronized real-time playback on your monitor (depending on the decoding capacity and recording resolution) • Up to 8 MP (4K) resolution live view and playback • Supports H.265 HEVC smart codec/H.264 • De- warp fisheye camera(HC30WF5R1) video, Honeywell Smart Viewer (HSV) windows desktop and HSV Mobile App for 360 degree situational awareness • Together with 35 series cameras, offering bandwidth saving features like Smart codec • • Two way audio/push notification for incident management With 16TB HDD. Make: Unv, Honeywel Impact,Pelco,Axis
319	Supply and Installation of Outdoor Bullet IR Network Camera with Audio (1/3\\" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: Unv,Honeywel Impact,Pelco,Axis
320	Supply and fixing of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 370 Watt,Switch shouldsupport IEEE 802.3af & IEEE 802.3at standard,MAC Address 16K , Jumbo Frame 12K,Temperature Working 0°C~50°C, storage - 40°C~70°C, Power Supply AC: 100~240VAC. All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make:Cisco/Grandstream/Digisol/Systimax
321	Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in existing conduits.Make: Digisol,Systimax,Legrand.
322	Supply and Installation of 32\\" Commercial Display.Make: LG,Samsung,Panasonic
323	SPLIT AC Supply, Installation, Testing, Commissioning of highwall Inverter comptabilie split units (minimum 3 star) of following capacities including proper mounting arrangements and accessories, copper refregirant piping,pvc drain piping,power cable,control cable, initial charge of refrigerant, safety limit thermostat, etc complete including 5 KVA voltage stabilizers. ( Make - Carrier/Daikin/Bluestar/Hitachi )(1.5 TR capacity.)
324	HIMAST LIGHTING Supply,installation,testing & commsioing of 16M high mast shaft in two section suitable for 55 m/sec wind speed along with head frame, luminaires carriage suitable for 08 luminaires in symmetrical arrangement and other accessories manufactured in factory. NOTE: One 16 Mtr Highmast shall be used as flag mast. Make -Bajaj/Consoul (R RIspat) /Valmont/Utkrash/Kesslec/Transrail.
325	Supply,installation,testing & commsioing of raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial including wire (1.5Sqmm) from JB to individual luminaire & MCB in base compartment.
326	Supply,installation,testing & commsioing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template.
327	Supply,installation,testing & commsioing of LED floodlight type 250 W fixtures. Make-Philips/Havells/Panasonic/Kesslec.
328	Supply,installation,testing & commsioing of LED type single dome aviation obstruction light. Make-Philips/Havells/Panasonic/Kesslec.
329	Supply,installation,testing & commsioing of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.
330	Supply, Installation, Testing and Commissioning of Octagonal 6MTR GI Poles with PU paint and single arm Braket of 1 MTR length for Roadways & Parking Areas with all respect or as per direction of engineer in charge at site. Make: Philips/Havells/Panasonic/Kesslec/Transrail
331	Supply, Installation, Testing and Commissioning of Octagonal 6MTR GI Poles with PU paint and double arm Braket of 2 MTR length for Roadways & Parking Areas with all respect or as per direction of engineer in charge at site. Make: Philips/Havells/Panasonic/Kesslec/Transrail
332	Supply, Installation, Testing and Commissioning of 90W LED light fixture for 6 mtr decorative single arm pole.Make: Philips/Havells/Panasonic/Kesslec
333	Supply, Installation, Testing and Commissioning of 60W LED light fixture for 6 mtr decorative double arm pole.Make: Philips/Havells/Panasonic/Kesslec.
334	FIRE EXTINGUISHER SYSTEM FOR EXTERNAL & PANEL ROOM Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket . (Make: superimax/Cese fire/Minimax)
335	Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete. (Make: superimax/Cese fire/Minimax)
336	Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket.(Make: superimax/Cese fire/Minimax)
337	Fire buckets ( WITHOUT SAND) round bottom type enamel painted, white inside & Red out side and Letter \\"FIRE\\" in black out side and handle with mounting bracket.
338	Transformer Supplying installation testing and commissioning of 250 KVA 11/0. 415 KV 3 Phase, 50Hz, Dyn11, oilcooled ONAN type, Outdoor type, copper wound transformer Confirming to IS:1180(Part-I), 2014 and Energy Efficiency Level-3 with OFF load tap changing arrangement on HV side from + 5% to -10% in steps 2.5% along having cable end box on HT and LT side, complete with, oil and winding temperature indicator and alarm contact, PRV, MOG with all accessories i/c first filling of filtered dehydrated oil asPer direction of EIC.(Make:OTPL/OEU/CG/KIRLOSKAR)
339	Supply,installation,testing & commissioing of DP structure with AB switch for 11/.415 KVA transformer using 11mtr Pole with below accessories items (RS Joist 150x150MM(11mtr)
340	100x50x6mm MS channel
341	75x40x6mm MS channel
342	50x50x6mm MS channel
343	11KV 200Amp,3pole AB switch
344	11KV 200Amp,3pole HG Fuse
345	11KV Lighting Arrestor(12KV,10KA)
346	HT stay set complete
347	HT stay Insulator
348	HT stay set clamp (Each 1.95kg) 2pair
349	GI stay wire(7/10)
350	Insulated conductor 55Sq mm
351	Earth Rod
352	50x6 mm GI Flat for earthing
353	Asorted size nuts and bolts with washer
354	Aluminium Binding wire
355	Earthing Coil
356	11KV Danger Boaard
357	Different size all cable socket
358	Red oxide Paint
359	Aluminium paint
360	Black paint
361	Maintenance free Earthing with 3mtr GI pipe
362	concreting of pole pits
363	Concreting of stay pits
364	Couping of pole
365	Erection of GI Fencing with gate & Metal spreading
366	11kv pin insulator
367	11 GI pin for insulator
368	DG SET SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 100KVA SILENT D.G.SET 415 VOLT, 3PH, 50 HZ, 0.8PF AT 1500RPM conforming to ISO 3046 / BS 5514 ,ENGINE COUPLED WITH ALTERNATOR, FUEL TANK, BATTERY 12 VOLT, RESIDENTIAL SILENCER AND MANUAL CONTROL PANEL
369	ISOLATOR PANEL Supply, installation, testing and commissioning of IP 65 cubicle type sectionalised, front operated bottom entry outdoor type M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.Make-L&T/Schneider/ABB/Legrand
370	APFC PANEL AUTOMATIC POWER FACTOR CORRECTION PANEL OF 75 KVAR WITH 14% DETUNED REACTOR & WITH 5 (2+3) KVAR FIXED CAPACITOR. ALL CAPACITORS SHALL BE OF 525V.
371	Earthing Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.
372	Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required
373	Providing and fixing 25mm X 5 mm copper strip at 0.50 meter below ground/suraface including connection/termination with brass nut, bolt, spring, washer excavation and refilling(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required.
374	Providing and fixing 25mm X 5 mm GI strip at 0.50 meter below ground/suraface including connection/termination with nut, bolt, spring, washer excavation and refilling(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required.
375	Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.
376	Providing and fixing 8 SWG copper wire on surface or in recess for loop earthing along with cables etc as required.
377	Panels Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.Make-L&T/Schneider/ABB/Legrand
378	Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 100Amp CU busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
379	Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 160 Amp CU busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.Make-L&T/Schneider/ABB/Legrand
380	Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 100Amp Tinned CU busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.Make-L&T/Schneider/ABB/Legrand
381	Supply, fixing, testing and commissioning of 5 LB Clean Agent system complete with all necessary Clean Agent FK-5-1-12 / Novec 1230 (UL listed ) gas ,fitting ,support , and accessories, connected with PESO approved DLP valve with CE & PI marked, with PESO approved Cylinder, End of Line Adaptor,Pressure Switch (UL Listed) for monitor system activation .System shall be Helium Leak Tested to 10^-7 mbar l/s.(MAKE: SUPREMEX, SEVO, FIREBOY)
382	Supply, fixing, testing and commissioning of Flexible Polymer Detection Tube (size 6 mm outer dia & 4mm inner dia )with all necessary fittings &supports. (UL Listed) with all necessary fitting and support (MAKE: SUPREMEX, SEVO, FIREBOY)
383	Supply, fixing, testing and commissioning of Master control unit with audio visual alram with wiring to complete system operational control panel should have provision for integration with fire alram /scada/BMS system Health Monitoring Cum Alarm Panel (MAKE: SUPREMEX, SEVO, FIREBOY)
384	Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (KEI/POLYCAB/GLOSTER/HAVELLS) 3.5C X 240 sqmm
385	3.5C X 120 sqmm
386	3.5C X 70 sqmm
387	3.5C X 25 sqmm
388	4CX 16sqmm
389	Supplying & Testing of 1.1 KV grade Cupper Armoured cable. (KEI/POLYCAB/GLOSTER/HAVELLS) 3CX 6 sqmm
390	3CX 2.5 sqmm
391	Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required . Above 125 Sqmm and upto 400 sqmm
392	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size in the existing RCC/HUME/STONEWARE/METAL pipe as required. upto 25 Sqmm
393	Above 25 sqmm & upto 120 Sqmm
394	Supplying and laying UPVC pipe (80 Schedule) of following diameter burried in ground at appropriate depth for cable laying as required. 110 mm dia
395	Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) 3.5C X 120 sqmm
396	3.5C X 70 sqmm
397	3.5C X 25 sqmm
398	4CX 16 sqmm
399	3CX 6 sqmm
400	Supplying instalaltion hot dip galvanized perforated type cable tray with perforation not more than 17.5% of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as requiredMake-BEC/MEM. 150 mm (W) X 50 mm (H) with 1.6 mm thick sheet
401	300 mm (W) X 50 mm (H) with 1.6 mm thick sheet
402	Supply, Exivation&Refilling of HDPE Pipe, 60MM Dia
403	Supply, Exivation&Refilling of HUME Pipe, 300MM Dia Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Sports Infrastruture Tenders

Stadium Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Multipurpose Stadium At Dobal In Dhamnagar Block In The District Of Bhadrak For 2026-27., Bhadrak-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Multipurpose Stadium At Dobal In Dhamnagar Block In The District Of Bhadrak For 2026-27., Bhadrak-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us