|
| 1 | Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following, dimensions 410-SP-33; 9.0mtrs: 164 Kg Make: reputed brand. |
| 2 | S/F M. S. loop box (10 SWG) of size 10.3/4 “x 8.3/4” x 5\\" Each 1147.00 (269mm x 219mm x125mm) having almirah type cover complete with special type locking arrangement including S/F 8 “x6” x1/4\\" (200mm x 150mm x 6 mm) bakelite sheet 1 no. 4-way ebonit connector block, 1 No. 15 Amp fuse unit fitted inside the box and suitable size danger board riveted on cover of the box outside & fixing the box with pole by means of M.S. Clamps of 1\\"x1/4\\" (25mm x 6mm) of suitable length and encasing the box by 1:3:6 cement concrete with graded stone chip (3/4\\" down). The depth of the concrete should be 60cm x 54cm x 54cm including plastering and neat cementing and S/F 2 Nos. compression gland of suitable size and making all necessary connections as reqd. |
| 3 | Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportionand Dimension indicated below), having 600x660x150 mm thick CC (4:2:1) base block below sole plate/ pole with hard jhamametal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 km from Store to Work-site including filling up the excavated earth pit with shifted soil and ramming properly. Upto 9 mtr. Size: 0.6m x 0.6m x 1.70 mts. |
| 4 | Extra on items 3 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box |
| 5 | Supplying, delivery and fixing of 1.5 mtr. Long GI Single Arm Bracket (with minimum 48.8 mm OD GI Pipe, but will be suitable for pole and LED fixture) |
| 6 | Painting Block Letters or Digits within a circle / square as required, with \\"Black Japan\\" paint of approved make & brand, the size of letters and digits as given below: Size 50 mm and upto 75mm |
| 7 | Supplying and Delivery of 120W LED fitting, New generation energy saving & environmental friendly long life versatile pressure die cast alminium IP66, road way luminarie with high power LED as light source. CHIP Make : reputed brandMake : reputed brand conforming to latest NABL accreditation. Inbuilt stilco filled Potted LED Driver should be given and is should be BIS certified. With installation of CCMS facility. System Efficiency : Greater than or equal to 120 Lumen/Watt LED should be warranty for 5 years with LM 79 report should be submitted |
| 8 | Supply, delivery and laying of 3 core 2.5 Sq.mm. Flexible Multicore Copper cable as per IS 694 (connection from Loop box to Light Fixture) Make: reputed brand & test report should be submitted. |
| 9 | Supply of 1.1 KV grade XLPE insulated Aluminium conductor armoured Cable 4 core 16 Sq.mm. Make: reputed brand test |
| 10 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 11 | S&F medium gauge GI pipe (ISI-Medium) protection with necessary fittings and jointing materials as required.40mm dia GI pipe. |
| 12 | Laying of one cable upto 50 Sq.mm. through existing RCC/Hume/ GI pipe open masonry trench for single 2,3, 3.5 & 4 core. |
| 13 | Supplying and Fixing compression type gland complete with brass gland, brass ring and rubber ring for dust and moisture-proof entry of XLPE/ PVC Armoured cables as below.For 4 core 16 sqmm |
| 14 | Finishing the end of following XLPE/ PVC Armoured Cables by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anti corrosive paste and jointing materials: For 4 core 16 sqmm |
| 15 | Earthing (for individual pole & Feeder piller box) Excavation of soil for installation of Earth Electrode and filling & ramming. |
| 16 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By ISI-Medium GI pipe |
| 17 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 18 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/ emery paper, cleaning etc. for receiving fresh coat of paint (a) Upto 9.0 mtr. long pole (i) 1st coat of aluminium paint over 1 coat of RO priming |
| 19 | (ii) 2nd coat of aluminium paint over 1st coat |
| 20 | Supply and fixing of feeder pillar box (overall approx dimension 1400mm x 750mm x 525mm fabricated from 3mm and 6 mm thick MS Plate as per drawing in brick cement foundation(1:6) plastering (12 mm thk) neat cementing (1.5 mm thk) incl. supplying and fixing 250 mm long 16 mm dia bolts, nuts, washers, back plate etc. Incl. supplying and fixing sheet metal( 16 SWG) iron clad bus bar chamber on angle iron frame with 4 bars, 415V, 63A, 4x20x5mm and 1 no 4P 32A MCB, 4 No 4P 16A MCB, 1 no astronomical Time Switch Model TSQ-100, Type- QTN, 1 no contactor cat no-SS90910 (or equivalent, 1 no auto/ selector, push button sets . |
| 21 | Supply of 1.1 KV grade XLPE insulated Aluminium conductor armoured Cable 3.5 core 25 Sq.mm. Make: reputed brand test report should be submitted |
| 22 | Fitting, fixing ,testing and Commissioning of LED street light |
| 23 | Deduction of scrap & unserviceable materials for item no.1 & item no 7. |
| 24 | ADD GST 18% except sl no |
| 25 | ADD LWC 1% Please Enable Macros to View BoQ information |
