Tender For Special Repair Of Bldg No P-168 Otm Jco Accn At 4 Ladakh Scouts Under Age B/R-I Of Ge 865 Ews,Leh
Tender Value
41.38 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
11 days left
EMD
82800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No P-168 Otm Jco Accn At 4 Ladakh Scouts Under Age B/R-I Of Ge 865 Ews,Leh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed. |
| 2 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 but nexc .18 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the surfaces over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 3 | M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200/450 x 350 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the surfaces, over and including 10mm thick plaster in CM (1:4) as in dado/skirting, complete all as specified and directed. |
| 4 | Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed |
| 5 | M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed. |
| 6 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge. |
| 8 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge. |
| 9 | Ditto but n'exc 1.0 sqm complete all as directed by Engr-in-charge |
| 10 | Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed |
| 11 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement |
| 12 | S & F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store of 1000 ltrs capacity complete all as specified and as directed by Engr-in-Charge. |
| 13 | S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap). |
| 14 | S & F in repair 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe |
| 15 | S&F in repairs Angle stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe fixed in repairs. complete all as directed by Engr-in-charge. |
| 16 | S&F in repairs swivel shower with arm of PTMT any colour for fixing witth 15mm pipe (Min wt 40 gms) |
| 17 | S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed. |
| 18 | S & F in repairs 600X450mm 600 mm x 450 mm bevelled edge mirror of selected quality glass, mountained on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washwers. |
| 19 | S&F Grating round 140mm size PTMT (Minimum weight 50 gms) |
| 20 | S&F in repairs Soap dish Cromum plated. |
| 21 | S&F in repairsTowel rail 600mm long Cromum plated (Minimum weight 190 gms). |
| 22 | Taking down steel tubing 25 or 32 mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge. |
| 23 | S&F 3 layer PP-R Polypropylene random copolymer pipes 25mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. |
| 24 | Description all as per above item no 23 but 32 mm bore pipe |
| 25 | S&F in repairs PP-R gate valves 25 mm dia (brass insert) as per requirement of the site. |
| 26 | S&F in repairs Vitreous China squatting pan 'Orissa' pattern,size 580x440 mm white with ntegral foot rests (excluding flushng cistern and flush pipe) and all as directed by Engneer-in-Charge. |
| 27 | S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete. |
| 28 | S & F Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. |
| 29 | S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets |
| 30 | S&F in repairs for wash basin, vitreous china ,white , flat back, size 630X450 mm including bbrackets & including cutting for and pinning in ends of brackets or errecting stand but excusive of fixing of supply and waste pipe as spfd and directed |
| 31 | S&F in repairs Waste cupling for bore dia discharge pipe of PTMT (half or full threaded) minimum weight 32 -45 gms/40mm -60gms). |
| 32 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins. |
| 33 | Dismantling CI/PVC pipes of up to 100mm bore with fittings. |
| 34 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber joints fixed to walls complete all as specified and directed by Engr-in-charge. |
| 35 | S&F repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber joints fixed to walls complete all as specified and directed by Engr-in-charge. |
| 36 | PVC (SWR) 'S or P', trap of 110 mm bore. |
| 37 | S/F 110 mm dia (SWR) bend any redius complete all as specified |
| 38 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed |
| 39 | M&L for 15mm thick rendering using water proofing compound @ 3% of cement on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed.Notr :- WPC shall be measured and paid separately under respective item. |
| 40 | M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed |
| 41 | M&L for 5mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed by engr in charge. |
| 42 | M&L Intergral water proofing compound |
| 43 | Demolition of cement concrete in roof surface and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed |
| 44 | Applying a thin film of cement slurry 2mm thick mixing with water proofing compound as per manufacturers instruction on floor surface |
| 45 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick less than 150 gms/sqm) land on primed surface by forced application complete all as specified |
| 46 | M&L for preperation of new concrete /plastered surface of any description and applaying two coat of exterior emulsion paint over a coat of primer complete all as specified and as directed complete all as specified and as directed. |
| 47 | M&L for preperation of new concrete /plastered surface of any description,applying two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed. |
| 48 | M&L for preperation of new plastered on ceiling surface of any description and applying three coat of white wash complete all as specified and as directed. |
| 49 | M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coat of white washing complete all as specified and as directed. |
| 50 | M&L for preperation of old decorated plastered/unplastered surface of any description and complete removal of existing treatment of two coat of white wash on old white washed surfaces of ceiling including preparation complete all as specified and as directed by Engr-in-charge. |
| 51 | M&L for preperation of old decorated plastered/unplastered surface of any description and complete removal of existing treatment, applying two coat of destemper oil emulsion complete all as specified and as directed complete all as specified and as directed. |
| 52 | M&L for preperation of old decorated plastered/unplastered surface of any description and complete removal of existing treatment and applying two coat of exterior emulsion paint complete all as specified and as directed complete all as specified and as directed. |
| 53 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. |
| 54 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 55 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 56 | S&F Powder Coated Anodised aluminium frame of standerd section for doors, windows, ventilators , Partitions etc with double rebates including joining cleat for fixing etc. complete all as specified |
| 57 | S&F Powder Coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 58 | M&L sheet glass 5.5mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed |
| 59 | S&F 2nd class hardwood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge. |
| 60 | S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage |
| 61 | Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge. |
| 62 | S&F for 35mm thick 2nd class hard wood plain framed paneled shutters (two panels) with panels with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces and fixed to chowkats , complete all as directed by Engr-in-charge. |
| 63 | S&F 2nd class hard wood (kail) glazed and Skelton shutters, 35mm thick, open rebated and prepared to receive glass/gauge etc (with stiles and rails) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing wire mess etc sizes of members of shutters as specified in SSR Part - I section 8, clause 8.24 (a), supplied and fitted to chowkats complete. |
| 64 | Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed . |
| 65 | M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 66 | M&L figured glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 67 | S & F in repair Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned stacks, or galvanized wire staples. |
| 68 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 69 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 70 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 71 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge. |
| 72 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repairs mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed. |
| 74 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 75 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 76 | S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 77 | S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 78 | Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed |
| 79 | Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton. |
| 80 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed. |
| 81 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed |
| 82 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed. |
| 83 | Ditto as above but on ceiling complete all as specified and as directed |
| 84 | Providing 50mm thick insulation of water pipe line 20/25/32 mm dia pipe complete all as specified and directed by Engr in Charge. which includes of the following:-Export quality heat traceable (heat tape) , self regulating and auto cut with thermostate systemAluminum tapeK. Flex 19mmRock woolWire MashPolytheneCello tapeAluminum sheet 28 gauge |
| 85 | S & F PVC perforated caps screwed to ends of puff or vent pipes 32 mm |
| 86 | M&L for Cement concrete type B-2,1:4:8 (40mm graded crushed stone aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. |
| 87 | M&L for Chequred cement concrete tiles 20cm X 20cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge. |
| 88 | S&F in repair grating doom 100mm dia of PTMT (Minimum wt 25 grm) complete all as specified and directed. |
| 89 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge. |
| 90 | Taking down of submain wiring surface of wall, floores / ceiling and match the existing complete all as specified and directed. |
| 91 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:- |
| 92 | One light/exhaust fan point controlled by one way switch |
| 93 | One switch socket outlet 6 Amps, 230 volts point on Same board |
| 94 | One switch socket outlet 6 Amps, 230 volts point on independent board |
| 95 | All as item No 91 above, but using cables 4 Sq mm size |
| 96 | Supply and replacement of lamp holder insulated body with back plate. |
| 97 | Supply and fix Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed. |
| 98 | Supply and fix Socket outlet 5 pin 6 Amps flush type.230 volts complete all as directed. |
| 99 | Supply and fix switch Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as directed. |
| 100 | Supply and fix switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed. |
| 101 | Supply and fix Ceiling rose, surface Bakelite three terminals complete all as directed. |
| 102 | Supply and fix in replacement of 4 way double door TPN Vertical load line DB suitable for Flush/surface mounting with 160 Amp & 250 Amp copper bus bar with neutral & earth bars including MCCB 160 Amp TPN as incomer and fixing arrangements for SPN/TP MCBs as outgoing and making good disturbed surfaces of walls, floors, etc. complete all as specified. |
| 103 | Supply and fix in replacement MCB SP 63 Amp 240 Volts AC ISI marked 'C' curve complete all as specified and directed. |
| 104 | Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge. |
| 105 | Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge. |
| 106 | Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as directed. |
| 107 | Supply and fix in replacement submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x10.0 sq. mm + 1x10.0 sq. mm earth wire complete all as specified and directed. |
| 108 | Supply and Fixing only in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 109 | Supply, fixing, connecting and testing in replacement LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. |
| 110 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed |
| 111 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed |
| 112 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 113 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender