Tender For General Civil Maintenance Works For A Period Of 2 Years At Kaiga 5&6, Kaiga Site.
Tender Value
1.85 Crore
Estimated cost
Bid Submission
16 Jul 2026
3 days left
EMD
3.71 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General Civil Maintenance Works For A Period Of 2 Years At Kaiga 5&6, Kaiga Site.
BOQ
| Sl. No. | Item Description |
| 1 | Carrying out comprehensive day to day basis civil maintenance works of Carpentry, Plumbing, Masonry, Fabrication, including repairs, rectifications, welding, water supply and sewage line works, structural steel works, handling and all other associated miscellaneous works, all complete as per technical specifications as directed by the Engineer-in-Charge at all heights, lifts and locations. Note: (i) For execution of above, the required manpower is detailed under Items 1.1 to 2. (ii) Each operation shall mean deploying one manpower for minimum 08 hours. (iii) Materials and consumable required to carry out the assigned job shall be utilised from relevant item. (iv) Refer Technical specification |
| 2 | Carrying out day to day maintenance jobs mentioned above by deploying Carpenter for each operation. |
| 3 | Carrying out day to day maintenance jobs mentioned above by deploying Plumber for each operation. |
| 4 | Carrying out day to day maintenance jobs mentioned above by deploying Mason for each operation. |
| 5 | Carrying out day to day maintenance jobs mentioned above by deploying Painter for each operation. |
| 6 | Carrying out day to day maintenance jobs mentioned above by deploying Welder for each operation. |
| 7 | Providing assistance as per requirement for above mentioned Manpower and Works i.e, from Item No. 1.1 to 1.5, by deploying Unskilled manpower for each operation as per technical specification by Engineer-in-Charge.Note: (i)Each operation shall mean deploying one manpower for minimum 08 hours. (ii) Materials and consumable required to carry out the assigned job shall be utilised from relevant item. (iii) Refer Technical specification |
| 8 | Ordinary Portland Cement (OPC) – 43 Grade |
| 9 | Fine Aggregate |
| 10 | Coarse Aggregate – 20 mm and down size |
| 11 | Coarse Aggregate -10 mm and down size |
| 12 | Nails (dia. as per requirement) |
| 13 | Superior 1st quality Acrylic wall care putty |
| 14 | Sandpaper (grits as per requirement) |
| 15 | Crack filling compound (Epoxy/PU or as per requirement) |
| 16 | Interior grade primer for painting works |
| 17 | Interior grade acrylic plastic emulsion paint |
| 18 | Exterior grade primer for painting works |
| 19 | Exterior grade weather & waterproof paint |
| 20 | Synthetic enamel paint |
| 21 | Wooden putty |
| 22 | High-gloss synthetic enamel paint |
| 23 | Thinner / turpentine oil |
| 24 | CPVC Pipe – 15 mm dia, pressure rating ≥ 10 kg/cm² |
| 25 | CPVC Pipe – 20 mm dia, pressure rating ≥ 10 kg/cm² |
| 26 | CPVC Pipe – 25 mm dia, pressure rating ≥ 10 kg/cm² |
| 27 | CPVC Pipe – 32 mm dia, pressure rating ≥ 10 kg/cm² |
| 28 | CPVC Pipe – 40 mm dia, pressure rating ≥ 10 kg/cm² |
| 29 | CPVC Pipe – 50 mm dia, pressure rating ≥ 10 kg/cm² |
| 30 | CPVC Coupler / Socket – 15 mm |
| 31 | CPVC Coupler / Socket – 20 mm |
| 32 | CPVC Coupler / Socket – 25 mm |
| 33 | CPVC Coupler / Socket – 32 mm |
| 34 | CPVC Coupler / Socket – 40 mm |
| 35 | CPVC Coupler / Socket – 50 mm |
| 36 | CPVC Elbow / Bend – 15 mm |
| 37 | CPVC Elbow / Bend – 20 mm |
| 38 | CPVC Elbow / Bend – 25 mm |
| 39 | CPVC Elbow / Bend – 32 mm |
| 40 | CPVC Elbow / Bend – 40 mm |
| 41 | CPVC Elbow / Bend – 50 mm |
| 42 | CPVC Tee – 15 mm |
| 43 | CPVC Tee – 20 mm |
| 44 | CPVC Tee – 25 mm |
| 45 | CPVC Tee – 32 mm |
| 46 | CPVC Tee – 40 mm |
| 47 | CPVC Tee – 50 mm |
| 48 | CPVC Reducer – 20 × 15 mm |
| 49 | CPVC Reducer – 25 × 20 mm |
| 50 | CPVC Reducer – 32 × 25 mm |
| 51 | CPVC Reducer – 40 × 32 mm |
| 52 | CPVC Reducer – 50 × 40 mm |
| 53 | CPVC Nipple – 15 mm |
| 54 | CPVC Nipple – 20 mm |
| 55 | CPVC Nipple – 25 mm |
| 56 | CPVC Nipple – 32 mm |
| 57 | CPVC Nipple – 40 mm |
| 58 | CPVC Nipple – 50 mm |
| 59 | CPVC / UPVC solvent (Bottle 100 ml) |
| 60 | GI clamps / pipe clips with fasteners |
| 61 | Anchor fasteners / rawl bolts / screws |
| 62 | PVC-U Pipe – 25 mm dia, pressure class PN 6 (or higher) |
| 63 | PVC-U Pipe – 32 mm dia, pressure class PN 6 (or higher) |
| 64 | PVC-U Pipe – 40 mm dia, pressure class PN 6 (or higher) |
| 65 | PVC-U Pipe – 50 mm dia, pressure class PN 6 (or higher) |
| 66 | PVC-U Pipe – 63 mm dia, pressure class PN 6 (or higher) |
| 67 | PVC-U Pipe – 75 mm dia, pressure class PN 6 (or higher) |
| 68 | PVC-U Pipe – 90 mm dia, pressure class PN 6 (or higher) |
| 69 | PVC-U Pipe – 110 mm dia, pressure class PN 6 (or higher) |
| 70 | PVC-U Pipe – 125 mm dia, pressure class PN 6 (or higher) |
| 71 | PVC-U Pipe – 140 mm dia, pressure class PN 6 (or higher) |
| 72 | PVC-U Pipe – 160 mm dia, pressure class PN 6 (or higher) |
| 73 | PVC-U Pipe – 180 mm dia, pressure class PN 6 (or higher) |
| 74 | PVC-U Pipe –200 mm dia, pressure class PN 6 (or higher) |
| 75 | PVC-U Coupler / Collar – 25 mm |
| 76 | PVC-U Coupler / Collar – 32 mm |
| 77 | PVC-U Coupler / Collar – 40 mm |
| 78 | PVC-U Coupler / Collar – 50 mm |
| 79 | PVC-U Coupler / Collar – 63 mm |
| 80 | PVC-U Coupler / Collar – 75 mm |
| 81 | PVC-U Coupler / Collar – 90 mm |
| 82 | PVC-U Coupler / Collar – 110 mm |
| 83 | PVC-U Coupler / Collar – 125 mm |
| 84 | PVC-U Coupler / Collar – 140 mm |
| 85 | PVC-U Coupler / Collar – 160 mm |
| 86 | PVC-U Coupler / Collar – 180 mm |
| 87 | PVC-U Coupler / Collar – 200 mm |
| 88 | PVC-U Bend / Elbow – 25 mm |
| 89 | PVC-U Bend / Elbow – 32 mm |
| 90 | PVC-U Bend / Elbow – 40 mm |
| 91 | PVC-U Bend / Elbow – 50 mm |
| 92 | PVC-U Bend / Elbow – 63 mm |
| 93 | PVC-U Bend / Elbow – 75 mm |
| 94 | PVC-U Bend / Elbow – 90 mm |
| 95 | PVC-U Bend / Elbow – 110 mm |
| 96 | PVC-U Bend / Elbow – 125 mm |
| 97 | PVC-U Bend / Elbow – 140 mm |
| 98 | PVC-U Bend / Elbow – 160 mm |
| 99 | PVC-U Bend / Elbow – 180 mm |
| 100 | PVC-U Bend / Elbow – 200 mm |
| 101 | PVC-U Tee – 25 mm |
| 102 | PVC-U Tee – 32 mm |
| 103 | PVC-U Tee – 40 mm |
| 104 | PVC-U Tee – 50 mm |
| 105 | PVC-U Tee – 63 mm |
| 106 | PVC-U Tee – 75 mm |
| 107 | PVC-U Tee – 90 mm |
| 108 | PVC-U Tee – 110 mm |
| 109 | PVC-U Tee – 125 mm |
| 110 | PVC-U Tee – 140 mm |
| 111 | PVC-U Tee – 160 mm |
| 112 | PVC-U Tee – 180 mm |
| 113 | PVC-U Tee – 200 mm |
| 114 | PVC-U Reducer – 32 × 25 mm |
| 115 | PVC-U Reducer – 40 × 32 mm |
| 116 | PVC-U Reducer – 50 × 40 mm |
| 117 | PVC-U Reducer – 63 × 50 mm |
| 118 | PVC-U Reducer – 75 × 63 mm |
| 119 | PVC-U Reducer – 90 × 75 mm |
| 120 | PVC-U Reducer – 110 × 90 mm |
| 121 | PVC-U Reducer – 125 × 110 mm |
| 122 | PVC-U Reducer – 140 × 125 mm |
| 123 | PVC-U Reducer – 160 × 140 mm |
| 124 | PVC-U Reducer – 180 × 160 mm |
| 125 | PVC-U Reducer – 200 × 180 mm |
| 126 | 15 NB long body stainless steel bib tap |
| 127 | 15 NB short body stainless steel bib tap |
| 128 | 15 NB stainless steel pillar cock |
| 129 | Hard, durable, approved quality stones / rubbles (150 mm to 200 mm thick) |
| 130 | Small size stones / stone chips |
| 131 | Interlocking paver blocks – 60 mm thick |
| 132 | Galvalume sheets of minimum 0.45 mm thickness |
| 133 | Self-tapping screws with washers (Packets of 200 pieces) size 4.8 × 30 mm, |
| 134 | Sealant / neoprene washers 16 mm diameter × 5 mm thick |
| 135 | Stainless steel floor door stopper (bright-finished, 75 mm) |
| 136 | Stainless steel screws of size 2” |
| 137 | Welding electrodes (Packet) |
| 138 | Cutting wheel of 115 mm diameter |
| 139 | Welding gloves (Pair) |
| 140 | Safety goggles |
| 141 | Self-drilling machine (for sheet fixing) |
| 142 | Concrete pans / tubs |
| 143 | Screed boards |
| 144 | Straight edges |
| 145 | Trowels / floats |
| 146 | Spirit level of minimum 25 m length |
| 147 | Water hose / curing pipe |
| 148 | Ladder (Aluminium) 5 meter |
| 149 | Ladder (Aluminium) 10 meter |
| 150 | Scaffolding (Aluminium) of size 0.8m x 2m x 2 m complete in all respects with platforms, braces, guard rails, toe board,fittings and accessories. |
| 151 | Tool Box (Carpentry) with all necessary tools |
| 152 | Measuring tape of 30 m |
| 153 | Measuring tape of 5 m |
| 154 | Measuring tape of 3 m |
| 155 | Floats (wooden / steel) of 300 mm × 120 mm |
| 156 | Chipping Machine of power rating of 750 W to 1,500 W, and deliver an impact rate of 1,500 to 2,500 blows per minute. |
| 157 | Wire brush |
| 158 | Scrapers |
| 159 | Paint roller of 4 inch |
| 160 | Paint roller of 6 inch |
| 161 | Paint brushes of 4 inch |
| 162 | Paint brushes of 2 inch |
| 163 | Paint brushes of 1 inch |
| 164 | Pressure water jet machine of rated pressure of 100–150 bar, flow rate of 6–12 L/min. |
| 165 | Hacksaw blade of 300 mm in length, with 24–32 teeth per inch. |
| 166 | Drill machine with power rating of 500–750 W, variable speed of 0–3,000 RPM, chuck size of 10–13 mm. |
| 167 | Welding machine of current range of 50–250 A, input voltage of 220–240 V, single-phase, duty cycle of 60% at 250 A |
| 168 | Welding cables with electrode holder |
| 169 | Earth clamp with cable with flexible copper conductor, 25 mm² cross-section. |
| 170 | Engaging Backhoe of JCB/Bull/CAT/TATA/Mahindra or equivalent brand for removal & disposal of collapsed soil/earth, stone boulders, fallen wood/trees/tree branches, any other unwanted material/things, excavation works, levelling of undulations, any other misc. works, etc., as per technical specification as directed by Engineer in charge at all height and all locations. The rate is inclusive of hire charges for deploying JCB including its maintenance, operator wages/charges, diesel & lubricants required for JCB, tools & tackles required for the job,etc., complete as directed by Engineer in charge.{Working hour will be considered from start of work to completion of days work i.e 8 hours}Note: Refer technical specification |
| 171 | Engaging Tractor with trolley / tanker for supplying water at construction site wherever necessary and for miscellaneous works such as transportation of sand, soil, debris, construction materials, etc., at all locations and at all leads, lifts and heights, as required. The rate is inclusive of one driver, one helper, diesel and lubricants charges, fuel charges, tools and tackles, operation, loading and unloading assistance and all statutory compliances, complete in all respects as per technical specifications and as directed by the Engineer-in-Charge.{Working hour will be considered from start of work to completion of days work i.e 8 hours} Note: Refer technical specification |
| 172 | Providing 1 (One) No. brand-new diesel utility double cabin vehicle for transportation of manpower and carriage of goods, having seating capacity of minimum 5 persons including driver, factory-fitted air conditioning, central locking system, minimum 2 airbags including driver airbag, parking sensors, tubeless tyres, suitable cargo deck and payload capacity, latest available model (preferably 2026 make), such as Isuzu S-CAB, Tata, Mahindra Bolero Camper, Toyota or equivalent approved vehicle, on monthly hire basis including fuel, lubricants, insurance, road tax, permits, statutory compliances, comprehensive operation and maintenance, replacement of spare parts, repairs of all kinds, breakdown maintenance, deployment of skilled driver for 24-hour duty, and minimum monthly running of 2,500 km, complete as per technical specifications and as directed by the Engineer-in-Charge. Note: Refer technical specification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender