Tender For Providing And Fixing Benches And Signage M.S Boards At Various Locations In Madanpur Khadar Jj Colony In Ward No, 185 (Madan Pur Khadar East)/Cnz., Delhi-Delhi
TDR : 56176000
Tender Notice
BOQ
5 Days Left
Delhi
Delhi
Tender For Providing And Fixing Benches And Signage M.S Boards At Various Locations In Madanpur Khadar Jj Colony In Ward No, 185 (Madan Pur Khadar East)/Cnz.
Name of Work:- Providing and fixing Benches and Signage M.S Boards at various locations in madanpur Khadar JJ Colony in ward no, 185 (Madan pur Khadar East)/CNZ.
Sl. No.
Item Description
1
Laying and Jointing PVC Pipe. Heading
2
Providing and Fixing Victorian type garden bench of approved design having both side armsmade of moulded single piece cast iron having weight not less than 48kg with back height720mm (+/- 5mm) and seating height 390mm (approx). Both side arms of bench shall beconnected with 11 numbers M.S. Tubes rectangular type 65x25mm and 16 SW guage thick oflength 1500mm for seating and back purpose with extra support of seating position of bench with 25x25mm M.S. Flat. The bench shall have the provision of hold fasts fixed with all thefour legs embedded in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size) of blocks of size 0.23x0.23x0.30 metre including excavation ofpits for four concrete blocks including primer and painting with approved quality of enamelpaint like Berger, Asian, Nerolac Paints etc. Minimum weight of bench shall be 90kg per bench(The weight of all the steel and cast iron members as mentioned above). The work shall beexecuted as per entire satisfaction and directions of Engineer-in-Charge.Note:1: The rate is inclusive of the cost of CC Block and excavation.2: For weight less than 90kg recovery on pro-rata base shall be made.3: No payment shall be made for weight more than 90kg.
3
Providing and fixing of precast RCC chair bench with arm rest each bench consists of 2 no, L-shaped base support in grey cement colour (thickness 80 mm x90 mm, 890mm back height; 450 mm front height with base width 690 mm) and 1 no. reinforcedconcrete plank in red colour of size 1500 mm x 400 mm x 50 mm and 1 no. ofreinforced concrete plank in red colour of size 1500 x 425 mm x 50 mm total heightof the bench 890 mm manufactured using cement concrete 1:1.5:3 (1cement: 1.5coarse sand : 3 stone aggregate 12.5 mm nominal size) using vibro compactionprocess reinforced suitably to promote long use and to prevent damage duringhandling. Transportation & erection, all parts are joined together with galvanisednuts and bolts of suitable size and all bolts are sealed after assemebly, bench top andback planks are treated with special anti-corrosive water proof coating so as to makesurface glossy and water proof and as per direction of Engineer-in-Charge.
4
Providing and fiving name board made of MS Sheet 90x60cm, 1mm thick with frameof MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat40x6mm, total height of the board above ground level 2.40m, length of legs belowground 0.30m embedded in CC block 1:2:4 (1 cement: 2 coarse sand: 4 graded stoneaggregate 20mm nominal size) 30x30x45cm including excavation and removal ofsurplus earth with in 50m lead, applying priming coat of approved steel primer,painting with synthetic enamel paint of approved quality and lettering with enamelpaint of approved colour (one side) as per drawing/direction of Engineer-in-Charge Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
