Tender For Welcome Maintenance And Other Misc Repair In Domestic Area At Af Stn Kalaikunda Under Ge (Af) Kalaikunda.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Other Misc Repair In Domestic Area At Af Stn Kalaikunda Under Ge (Af) Kalaikunda.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc.Complete all as specified and as directed. |
| 2 | M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | M & L for rendering 10mm thick cement plaster in cement mortar 1:6 on fair faces concrete/brick interior surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed. |
| 4 | M & L for rendering 15 mm thick cement plaster in cement mortar (1:4) on other than fair faces of concrete/brick exterior surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC measured and paid separetely. |
| 5 | Supply only integral water proofing compound. |
| 6 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over one coat of alkali based primer complete all as specified and directed. |
| 7 | M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 8 | M & L for preparation for preparation of new plastered surfaces applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of oil bound distemper over a coat of wall primer on walls surface complete all as specified and as directed. |
| 9 | M&L for Preparation of old decorated plastered or unplastered surface of walls and applying one coat of white wash complete all as specified and directed. |
| 10 | M&L for Preparation of old decorated plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 11 | M&L for preparation of old decorated plastered or unplaster surface of walls and applying one coat of acrylic Emulsion distemper any tint complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for preparation of old decorated plastered or unplaster surface of ceiling and applying one coat of acrylic Emulsion distemper any tint complete all as specified and as directed by Engr-in-Charge. |
| 13 | M&L for preparation of old decorated plastered or unplastered surface of walls and applying two coats of acrylic Emulsion distemper any tint complete all as specifed and as directed. |
| 14 | M&L for complete removal of existing treatment of any description 2mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic Emulsion distemper over a coat of primer complete all as specified and as directed. |
| 15 | M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. |
| 16 | M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not Exc 10 cm width or grith etc complete all as specifed and as directed. |
| 17 | M&L for Preparation of old surfaces of wall by brooming down with steel wire brushing scrapping down and removing oily and greasy spots etc and applying one coat of cement based paint (of any colour) including all necessary scaffolding and safety measures complete all as specified and directed |
| 18 | M&L for Preparation of old surfaces of wall by brooming down with steel wire brushing scrapping down and removing oily and greasy spots etc and applying two coat of cement based paint (of any colour) including all necessary scaffolding and safety measures complete all as specified and directed |
| 19 | M&L for preparing old decorated plastered or unplasterd surfaces of wal including comices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi peel off wall papdi by sand paper and making good with external wall care putty as per existing thickness and applying one coat of 100% Acrylic Exterior Emulsion paint on old surfaces complete all as specified and as directed including all necessary scaffolding and safety measures complete all as specified and directed |
| 20 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 21 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 22 | M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and as directed |
| 23 | Demolition of cement concrete flooring as in floor and paving n exc 15 cm thickness (below or above GL) incl the disposal upto 50M complete all as spd |
| 24 | M&L for PCC 40mm thick cement concrete type B1 1:2:4 (20mm stone aggregate) as in sub floor, sub bases, floors etc and pavings etc complete all as specified. |
| 25 | M&L for PCC 75mm thick 1:4:8 type B2 using 40mm graded stone aggregate as in sub base finishing the surface complete all as specified. |
| 26 | M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, haunching at junction of Chajja, Lintel and wall finished fair and even including weathering, slightly rounded, complete including demolition required all as specified and as directed. Notes:rates are deemed to be included with necessary form work in repair upto G+3 storied building. |
| 27 | M&L for Applying PU based liquid waterproofing composition on concerete or plastered suraface consisting as PU based modified acrylic despersion material having density 1.30 kg/ltr,water resistance applies in 3 layers (prime coat @ 0.3kg/sqm,base coat @0.5 kg/sqm,top coat @ 0.5kg/sqm) as per manufacturer instructions.make: Sika lastic-590IN or equivalant,complete as directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 29 | M&L Joint free Vitrified Ceramic light shade tiles 8-10mm thick (square/ rectangular) polished size 600x600mm or 600x1200mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding screed bed or bedding layer of cement mortar 1:6, 15mm thick etc complete all as specified and directed. |
| 30 | All as per item No-29 above before but in skirting / dado or vertical surface with 10mm thick screed bed 1:3 cement plaster complete all as specified and as directed. |
| 31 | M&L for Non - skid Joint free Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and dricted |
| 32 | M&L Glazed coloured ceramic tiles in vertical surfaces size 450 x 300 x 7 mm or 600x300x7mm thick set joint in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:3 10mm thick for laying dado/skirting tiles etc complete all as specified and directed. |
| 33 | M&L Machine cut mirror polished kota stone slab flooring with rounded edge 20-25 mm thick over cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 34 | M&L Machine cut kota stone skirting 18-20 mm thick in riser of steps in single peice skirting, dado, and pillar over 10mm thick backing coat in cement mortar in (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing complete all as specified and directed. |
| 35 | Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 36 | M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 37 | Hacking out old broken glass (any thickness as per site quality or description) from metal or wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with putty or fixed with beads. |
| 38 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 39 | S&F figured glass 3mm thick pin headed type and glazing with oil putty in squares n exc 0.5sqm in each pane complete all as specified and as directed. |
| 40 | M & L Securing glass of any description in existing wooden/steel frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) |
| 41 | S&F in repair stainless steel wire cloth 0.63 nominal dia of wires and average width of aprarture 1.40 mm and fixed with tinned tacks galvanised wire staples fixed in repair including a coat of french blue paints. |
| 42 | M&L for wooden fillet of 20-40mm wide for securing Jali/mesh in position including nailing, finishing, and all complete all as specified and directed. |
| 43 | M&L for wooden glazing beading of size 1/2\\" or 3/4\\" for securing Glass/Jali/wiremesh mesh in position including nailing, finishing, and all complete all as specified and directed. |
| 44 | S & F in repair 1mm thick Dapery Rod (Curtain rod) fancy type 20/25mm dia as per site required, stainless steel, chromium plated fixed to wall with brackets, decorated end crowns fancy type including removal of existing pelmet box where as required complete all as specified and as directed. |
| 45 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated complete all specified. |
| 46 | S&F in repairs Rubber Door seal (Snake guard) minimum 50mm wide for door frame/bottom including fixing with adhesive, nails, screws complete all as specified and as directed. |
| 47 | S&F in repair 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 48 | S&F in repairs Floor door stopper of Brass body and tongue anodized with hard drawn steel spring fixed in floor (Overall length of cover plate 150 mm). |
| 49 | S&F in repair Double action floor springs hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main of brass with stainless steel cover governing pivot made of brass other parts made of M S heavy duty.Complete all as specified and as directed. |
| 50 | S&F in repair door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.Complete all as specified and as directed. |
| 51 | S&F in repair cabinet mirror of size 622mm x 422mm made with PVC sheet, coloured mounted on Pvc frame and fixed to wooden plugs withchromium plated brass screws and cup washers all as directed by Engr in Charge. |
| 52 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws.complete all as specified and directed |
| 53 | S&F in repair SS 6 pin door/wall cloth hanger fancy type fixed to plugs chromium plated screws complete all ad specified. |
| 54 | S & F in repair brass 4-levers Mortice lock, vertical type, size 100mm complete all as specified and directed |
| 55 | Repairing & Refixing shutters in same opening of any description of area n exc 1 Sqm each.Complete all as specified and as directed. |
| 56 | Repairing & Refixing shutters in same opening of any description of area exc 1 Sqm but n.exc 2 Sqm each.Complete all as specified and as directed. |
| 57 | Repairing & Refixing shutters in same opening of any description of area exceeding 2 Sqm each.Complete all as specified and as directed. |
| 58 | M&L for easoning/ Adjusting,resecuring and making smooth for functioing of steel window shutter by means of welding, bilting, screwing with necessary tools and plants to make the window shutter functionable incl necessary hinges,handles,tower bolt etc.Complete all as specified and as directed. |
| 59 | S&F mild steel socket/hook for tower bolt for locking the window and door shutters by means of welding and screwing in door,window frames as specified and directed by Engr-in-Charge. |
| 60 | Refixing including taking down door exceeding 1 Sqm each, easing and adjusting and also refxing builders hardware as reqd including removal of unserviceable screws etc. |
| 61 | Refixing including taking down door exceeding 1 Sqm n.exc 2 Sqm each, easing and adjusting and also refxing builders hardware as reqd including removal of unserviceable screws etc. |
| 62 | Refixing including taking down door exceeding 2 Sqm each, easing and adjusting and also refxing builders hardware as reqd including removal of unserviceable screws etc. |
| 63 | M&L for Repairing, easoning/ Adjusting of existing rolling shutter including lubrication of guide channels, springs, shaft, bearings, and alignment of shutter curtain, making smooth for functioing of Rolling shutter by means of welding, bilting, screwing with necessary tools and plants to complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repairs 300mm long aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of external section or cast aluminium alloy.Complete all as specified and as directed. |
| 65 | S&F in repairs aluminium handle cast type anodised of size 150mm long. |
| 66 | S&F in repairs MS butt hinges 75mm medium weight cold rolled and fixed to wooden or steel frame with screws or by welding all as specified. |
| 67 | S&F in repairs MS butt hinges 100mm medium weight cold rolled and fixed to wooden or steel frame with screws or by welding all as specified. |
| 68 | S&F in repair 18mm thick HDMR board prelaminated both sides as in including necessary PVC edge lipping used in for partition, Cupboard, kitchen Shelves including necsessary Clip, self Close Hinges, SS handle, Magnetic Ball Catches etc complete all as specified and as directed. |
| 69 | S&F in repairs continous (piano ) hinges ,mild steel ,bright finish galvanised width of flap 30 mm all as specified. |
| 70 | Supply and fix in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished.Complete all as specified and as directed. |
| 71 | S & F in repairs 12mm thick Toughned glass as in hinged doors,partitions automatic doors and similar works including cutting to shape, drilling holes in SS hooks, brackets, clamps, fastners & Holding clips, Hinges & 2 Nos of SS handle 300mm long in each door complete all as directed. |
| 72 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 73 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 74 | Refixing old steel tubing and connections 15mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed. |
| 75 | Refixing old steel tubing and connections 20mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed. |
| 76 | S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 77 | S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 78 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing and making good of groves for concealed, PP-R, GI tube, cutting not exc 10cm girth complete all as specified and as directed. |
| 79 | S & F in repair 20mm dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply with all PP-R plain & brass threaded polypropylene random accesories fittings inluded elbows, tees, couplings, reducers,and unions fixed complete to walls, ceilings or in floors etc including taking down complete all as specified. |
| 80 | All as per item No 79 above but 25 mm dia |
| 81 | Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe including plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinges devices complete all as specified and directed. |
| 82 | S&F in repairs vitreous china squatting Pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed. |
| 83 | S&F vitereous china wash down water closet pan (singe pice suite) white(including fixing bolts,flushing cistern and flush pipe connection to drain(or outing going pipe) and to flushing pipe anti syphonage pipe etc. including taking out of existing one and making good disturbed surfaces as per existing specification complete all asspecified and directed. |
| 84 | S & F in repair dual button Flush Kit for Single Piece WC of any make of W.C i.e Parryware, Hindware, Cera etc complete all asspecified and directed. |
| 85 | S & F in repair plastic water closet white seat cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed. |
| 86 | S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified. |
| 87 | Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified. in cliding pillar tap fancy type complete all as specified. |
| 88 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm |
| 89 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm. |
| 90 | S&F in repairs Waste coupling of 32mm dia, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed |
| 91 | S&F in repairs waste coupling of 40mm dia brass chromium plated for glaze ware sinks, basins, etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specfied and as directed |
| 92 | S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed. |
| 93 | S&F in repairs kitchen sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed. |
| 94 | S&F stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 36\\" to 30\\" incl shelves, rod to put plates etc and fixed to wall complete all as specified. |
| 95 | S&F in repairs PVC down waste pipe 900-1000mm long for wash hand basin fitted to 32 mm dia waste coupling.Complete all as specified and as directed. |
| 96 | S&Fin repairs PVC down waste pipe 900mm-1000mm long for Sink fitted to 40 mm dia waste coupling.Complete all as specified and as directed. |
| 97 | S&F in repair chromiuim plated Swivel shower roses of size 100 mm with shower arm, including fxing to steel pipe or union etc. |
| 98 | S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed. |
| 99 | S&F in repairs heavy duty fancy Standard towel rack of brass chromium plated including brackets. complete all as specified and as directed. |
| 100 | S&F in repairs towel Ring round with round flange of brass chromium plated including brackets. complete all as specified and as directed. |
| 101 | S&Fin repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12cm wide with CP bracket gaurd and railing 60 Cm long all as specified. |
| 102 | S&F in repair C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule. |
| 103 | S&F in repairs two way bib cock 15mm with single knob and wall flange complete all as specified and directed. |
| 104 | S&F in repair chromium plated brass central hole basin mixer for mixing Hot & Cold with 450 mm long braided hoses. |
| 105 | S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions. |
| 106 | S & F in repairs Stop/Angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 107 | S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 108 | S&F in repair Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe. |
| 109 | S&F chromium plated Health faucet ABS Body (Fancy type) SS Braided hose 1.25m with CP hook and fixed for 15mm bore dia . |
| 110 | S&F in repair brass CP wall mixer for mixing hot &cold water screwed down for iron pipe and fixed complete all as specified. |
| 111 | S&F in repairs toilet paper holder with flap recessed type stainless steel complete all as specified and directed. |
| 112 | S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws.Complete all as specified and directed. |
| 113 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe.Complete all as specified and directed. |
| 114 | S & F rotational moulded polyethylene three layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one complete all as specified and directed .all as specified and as directed. Make- Sintex |
| 115 | S & F rotational moulded polyethylene three layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one complete all as specified and directed .all as specified and as directed. |
| 116 | S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms).Complete all as specified and directed. |
| 117 | S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms).Complete all as specified and directed. |
| 118 | M & L for Disconnecting existing water tanks setting a side for repairs, cleaning of service for PVC tank by rubbing vertical wall and buttom of with bleaching powder and allowed 1/2 hour to react then washing down with water to get free from deposits and bleaching inside the tank of capacity and mouth of circulating pipes and hoisting, reconnecting, and refixing in position capacity exc. 300 and not exc. 500 Ltrs complete all as specified & as directed. |
| 119 | M & L for Disconnecting existing water tanks setting a side for repairs, cleaning of service for PVC tank by rubbing vertical wall and buttom of with bleaching powder and allowed 1/2 hour to react then washing down with water to get free from deposits and bleaching inside the tank of capacity and mouth of circulating pipes and hoisting, reconnecting, and refixing in position capacity exc. 500 and not exc. 1000 Ltrs complete all as specified & as directed. |
| 120 | S&F in repair SS grating doom 100mm dia with/without waste hole complete all as specified and as directed. |
| 121 | Taking down PVC rain water pipe any size or pattern including all fittings all as specified and directed. |
| 122 | S&F 110mm bore PVC (swr) pipes single socketed in any length with rubber ring joints fixed to wall/laid in floor.Complete all as specified and directed. |
| 123 | S&F 110mm bore PVC (SWR) bends any radius. |
| 124 | S&F 110mm dia PVC (SWR) junction, single (single T) equal or unequal with door access all as specified and as directed |
| 125 | S&F PVC (SWR) vent cowl 110mm dia.Complete all as specified and directed. |
| 126 | S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 75mm dia all as specified. |
| 127 | M&L for applying waterproofing treatment on Damp affected wall surface using approved make Polymer modified two component cementious high performance coating (Asian Paint SmartCare Damp Block 2K) in two coats over prepared surface including surface cleaning, removal of losse plaster/putty curing complete as per manufacturer instructions complete all as specified & as directed by Engr-in-Charge. |
| 128 | M&L treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors.Complete all as specified and directed. |
| 129 | M&L along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.Complete all as specified and directed. |
| 130 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same.Complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender