Tender For Addition / Alteration To Sewage/ Drainage System At Cgom And Provision Of Shed At Rhq (E) Complex Under Ge (I) Cg Chennai
Tender Value
31 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
7 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration To Sewage/ Drainage System At Cgom And Provision Of Shed At Rhq (E) Complex Under Ge (I) Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Sewage / Drainage System & Provision of shead |
| 2 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete complete all as specified and directed. |
| 3 | Demolition of cement concrete of any description and in any position complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed |
| 5 | Excavation in trenches n.exc 1.5 m wide and not exceeding 1.5 m in depth for fdn etc or for shaft erll cesspits manhoes pier hot etc n.exc 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft or loose soil complete all as specified and directed |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed |
| 7 | Removing excavated material exc 50m but not exceeding 250m and depositing where didrected at a lavel n.exc 1.5m above the starting point complete all as specified and directed. |
| 8 | Materials and labours for PCC.1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concret complete all as specified and directed |
| 9 | Materials and labours for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in CM 1:6 complete all as specified and as directed. |
| 10 | Materials and labours for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in copings, bed plates, drain in both side, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc., complete all as specified and as directed |
| 11 | Materials and labours for extra for Forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds,etc., complete all as specified and as directed |
| 12 | Materials and labours for extra for Forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds,etc., complete all as specified and as directed |
| 13 | Materials and labours for PCC.1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed |
| 14 | Materials and labours for external rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and as directed. |
| 15 | Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form work , complete all as specified ansd as directed. |
| 16 | Materials and labours for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 17 | Materials and labours for TMT Mild steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | Materials and labours for 200 mm bore dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars etc.,complete all as specified and as directed. |
| 19 | Materials and labours for 200 mm thick cement concrete type D-2 (1:4:8), as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in bore of pipe in, etc.,complete all as specified and as directed. |
| 20 | Materials and labours for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, Internal dia of pipe, etc., complete all as specified and as directed. |
| 21 | Materials and labours for Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 23 | Materials and labours for Non-Skid coloured printed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm and not exceeding .38 sqm of each tiles as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 for laying tiles on floors etc., complete all as specified and as directed . |
| 24 | Supply and fix for Glazed ceremic coloured printed tiles of size 350 mm x 250 mm x 7 thk or 450x 350mm x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10 mm thick backing in CM 1: 4 for laying glazed tiles to wall etc., complete all as specified and as directed. |
| 25 | Materials and labours for Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etcincuding rendering 10 mm thick cement mortar (1:4) to receive tiles in vertical surfaces , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 26 | Materials and labours for 18-20 mm thick Green Marble work of makarana white (table rubbed and polished) in entrance floors , plate forms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone including cutting and polishing types and making mould on edges & including cutting of three numbers of grooves etc including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 27 | Materials and labours for 18 to 20mm thick Green Marble work of makaraa white (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing types and making mould on edges & including cutting of three numbers of grooves etc including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 28 | Materials and labours for Chequered cement concrete tiles 300 x 300 mm/400x400mm,23- 25mm thick, as in floor/path, set, jointed and pointed in neat cement slurry with grey cement and pigments, laid over and including 15 mm thick screed bed in CM(1:4) complete all as specified and as directed. |
| 29 | Materials and labours for decorative plastic drain/mainhole cover size 750mm x 750mm as FRP Jemnex Square or equavelant all as specified and directed on site requirement accordingly complete all as specified and as directed. |
| 30 | Materials and labours for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M - 40 with grey cement and pigment complete all as specified and as directed. |
| 31 | Spreading and leveling sand in layers well ramming including watering as required complete all as specified and as directed. |
| 32 | Demolition and breaking 150 mm dia., drain pipes (Salt glazed ware, AC or reinforced concrete set in cement mortar, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and as directed. |
| 33 | Demolition and breaking 200 mm dia., drain pipes (Salt glazed ware, AC or reinforced concrete set in cement mortar, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and as directed. |
| 34 | Materials and labours for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed. |
| 35 | Materials and labours for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and as directed. |
| 36 | Materials and labours for Salt Glazed stone ware pipes , 150 mm dia grade \\"A\\", jointed with cement mortor , laid in trenches andincluding fittings of same grade, complete all as specified and as directed. |
| 37 | Materials and labours for Salt Glazed stone ware pipes , 200 mm dia grade \\"A\\", jointed with cement mortor , laid in trenches andincluding fittings of same grade, complete all as specified and as directed. |
| 38 | Supply and fix Mild steel work in framed work such as grills, gratings,framed guard bars, barred iron doors, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified and as directed. |
| 39 | Supply and fix Mild steel work in ornamental and intricate design framed and hung gates, including Pintle hinges, stops, hand made sliding bolts etc. and similar work confirming to Fe 290 Gde - E - 165 complete all as specified and as directed. |
| 40 | Supply and fix 1mm thick Galvanized Iron sheet in steel gates, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and as directed. |
| 41 | Demolition and breaking up 100 mm dia drain pipes (Salt glazed ware, AC,PVC or reinforced concrete set in cement mortar, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and as directed. |
| 42 | Supply and fix 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 43 | Supply and fix 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, laid in floors or trenches complete all as specified and as directed. |
| 44 | Excavating in trenches, not exceeding 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and n exc 1.5 m in depth and getting out of any type of soil complete all as specified and directed. |
| 45 | Materials and labours PCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations, filling and mass concrete for footing complete all as specified and as directed. |
| 46 | Materials and labours for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished complete all as specified and as directed. |
| 47 | Materials and labours for Reinforced cement concrete (nominal mix) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 48 | Soil Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed. |
| 49 | Removing excavated material/Soil not exceeding 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 50 | Materials and labours for Mild steel bolts exc 12 mm but not exceeding 20mm dia, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exceeding 30cm long complete all as specified and directed |
| 51 | Materials and labours for Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified and as directed. |
| 52 | Materials and labours for esign, Supply and Installation of FABRIIK Tensile structure with steel of SHS, CHS, RHS, of approved make, Apollo/Jindal as per structural analysis report for the wind zone of CHENNAI as per IS code IS 875 part 3 The steel shall be rolled to the desire shape and size as per the drawings shown. Quoted with one coat of epoxy primer and two coats of epoxy paint to finish of Berger/ Asian. The steel to be erected using proper methodology either by crane or manually lifted and kept inpostion and welded to achieve the architect and client intent of shape an size. The rates are inclusive of loading, unloading, hoisting, etc . Steel Structure to be designed for ChennaiWindspeed using STADD Pro Analysis method and Report to be submitted. Third Party Certification from Anna University or IIT to be provided Details:MS Sections: Commercial MS Hollow Rectangular/Square/Circular Sections/ISMB/ISMC/Langles/Plates conforming to E-210 Grade or equivalent MS Structure System : Welded MS Structure Finish : Epoxy (1 Coat of Epoxy Primer and 2 Coats of Epoxy) Paints : Berger/AsianAnchor Fasteners : High Tensile Bolts Mechanical Anchor Fasteners Chemical : Hilti or Fischer or equivalent (excluding RCC footing up to GL) (RCC Footing shall be as per designed by them but measure and paid separately) complete all as specified and directed. |
| 53 | Excavating in post holes any type of soil (or similar holes) each n. exc 0.5cu m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and as directed. |
| 54 | Materials and labours for PCC 1:4:8 type D2 40mm graded stone aggregate as in foundation filling concrete of fencing post complete all as specified and as directed. |
| 55 | Materials and labours for Pre-painted Semi-Circular galvalume aluminium zinc coating GI based corrugated steel sheet 0.63 mm thick of any colour having tensile strength of grade of zinccoating 275 as in roof if bent to a curve (of any radius) covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed. |
| 56 | Supply and fix Pre-painted Semi- Circular galvatume aluminium zinc coating GI based plain steel sheet 0.63mm thick of any colour having tensile strengthgrade of zinccoating 275 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 57 | Supply and fix for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality-A complete all as specified and directed. |
| 58 | Supply and fix for mild steel joist, channel, angle, or tee section, fixed independently, without connecting plates, etc. as in similar works conforming to Fe 410 W (gde E-250 quality B) complete all as specified and as directed. |
| 59 | Materials and labours for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 60 | Supply and fix for plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 Gde E-250, Quality 'B' complete all as specified and directed. |
| 61 | Materials and labours for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built-in cement mortar 1:6 complete all as specified and directed. |
| 62 | Materials and labours for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 63 | Materials and labours for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender