|
| 1 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed. |
| 2 | Taking down of chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified & directed. |
| 3 | Taking down door shutter exc. 1 Sqm n.exc. 2 Sqm of any description complete all as specified & directed. |
| 4 | Supply & fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc size of frame 125x60mm made out of 1.25mm MS sheets including one shop coat of priming complete all as specified & directed. |
| 5 | Supply & fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc size of frame 105x60mm made out of 1.25mm MS sheets including one shop coat of priming complete all as specified & directed. |
| 6 | Supply & fix 30mm thick glazed and skeleton shutter for doors of second class hard wood open rebated including necessary glass, gauge ,wire mess etc (with or without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc. sizes of member of shutters as specified in SSR Part-I, clause 8.24 (a) complete all as specified & directed. |
| 7 | Supply & fix flush shutter of 30 mm thick solid core construction, with block board core and ply wood with commercial type both side complete all as specified and directed by Engineer-in-charge |
| 8 | S&F 30 mm thick FACTORY MADE Solid PVC door frame of size 50mm x 47mm made out of 5mm Pre laminated PVC sheet reinforced with MS square tube as per specified and directed by engineer-in-charge. |
| 9 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 10 | M&L for PCC 1:3:6 type C-1 (using 20 mm greded agg) for hold fastner filling of pressed steel frame etc.complete all as specified and directed. |
| 11 | Supply & fix in butt hinges medium weight cold rolled mild steel 75 mm size , isi m arked all as specified |
| 12 | Supply & fix 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bldt plate and two on staple plate and fixed complete all as specified and directed. |
| 13 | Supply & fix aluminium anodized tower bolts 150mm long, of extruded section complete all as specified & directed. |
| 14 | Supply & fix mild steel 300 mm,ordinary rat rail rod pattern springs including roller and roller plate (Helical door spring) for door shutter complete all as specified & directed. |
| 15 | Supply & fixing in aluminium anodized fancy type handles of 150 mm size complete all as specified & directed. |
| 16 | Supply & fix floor door stopper of aluminium alloy body and tongue, anodized including rubber shoe fixed to wooden or aluminium (door shutter) of size 150mm complete all as specified and directed. |
| 17 | Supply & fix in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 18 | Supplying and fixing in repair 3 mm thick ordinary quality sheet glass in panes not exceeding 0.50 sqm each; fixed with oil putty or wooden beads (as per existing frame type) in square or rectangular shapes, including all labor, materials, and hacking out old broken glass of any thickness,quality or size from existing woodenor steel frames complete in all respects as specified and directed by the Engineer-in-Charge. |
| 19 | Supplying and fixing in repair 3 mm thick figured pin headed sheet glass in panes not exceeding 0.50 sqm each; fixed with oil putty or wooden beads (as per existing frame type) in square or rectangular shapes, including all labor, materials, and hacking out old broken glass of any thickness,quality or size from existing woodenor steel frames complete in all respects as specified and directed by the Engineer-in-Charge. |
| 20 | Supply & fix in repair butt hinges medium weight cold rolled mild steel 100mm size , ISI marked all as specified & directed |
| 21 | Supply & fixing in repair aluminium anodized fancy type handles of 150 mm size complete all as specified & directed. |
| 22 | Supply & fix in repair aluminium anodized tower bolts 150mm long, of extruded section complete all as specified & directed. |
| 23 | Supply & fix in repair floor door stopper of aluminium alloy body and tongue, anodized including rubber shoe fixed to wooden or aluminium (door shutter) of size 150mm complete all as specified and directed. |
| 24 | Supply & fix in repair aluminium (die cast) body door closer hydraulically regulated designation No. 3 universal type Make: Godrej / Shakti or equivalent as approved by GE, complete all as specified & directed. |
| 25 | Supply & fix in repair aluminium anodized hasp and staple of size 100mm long, safety type complete all as specified & directed. |
| 26 | All as per item No.25 here-in-before but 75mm long. |
| 27 | M&L for powder coated Aluminium anodized door shutter with frame including joining cleats and fixing accessories such as hinges handle and locking arrangements etc size of long rail stiles and bottom rail shall be 110x44.5 mm and top & centre rail shall be 85x44.5 mm thickness of aluminium section shall be 18 gauge with 15 micron anodizing top and bottom panel shall be provided with 5.00 mm thick plain sheet glass or 12mm thick PVC sheet best quality including locking arrangement (with mortice lock) including taking down door shutter with chowkat or frame, any size complete all as specified and directed by engineer-in-charge. |
| 28 | Supply & fix hydraulic door closer Aluminium (die cast type) regulated designation No-3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixe complete all as specified and directed. |
| 29 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in charge.(M.S hold fast/lugs or SS dash fastener shall be included) Note:For WPC solid door /window frames,minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable but no extra payment on this account shall be made |
| 30 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65X125 mm (Double rebates) comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in charge.(M.S hold fast/lugs or SS dash fastener shall be included) Note:For WPC solid door /window frames,minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable but no extra payment on this account shall be made |
| 31 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flameof Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,the unit rate quoted by contractor are including cost of all necessary conneted fittings(03x 100mm SS Hinges, 02x 150 mm Steel Handle, 1x300mm long sliding door bolts ,2X 150 mm aluminium tower bolts ,1x door stopper, in each shutter.), completed all as per direction of Engineer-In-Charge. |
| 32 | S&F for Factory made 30 mm thick100% solid WPC (Wood Polymer Composite) plain wiremesh door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum manufactured an ISO 9001-2015 certified company having good screw holding capacity and screw withdrawal strength of 2000 N (Face) & 110(Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with mosquito mesh and XTN Aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed screws at required distance, screw and deges covered with feathered pvc edge beading all around of mesh and stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,the unit rate quoted by contractor are including cost of all necessary conneted fittings(03x 100mm Hinges, 02x 150 mm Steel Handle, 1x300mm long sliding door bolts ,2X150 mm aluminium tower bolts,1x door stopper and stainless steel wire mess as per direction of engineer-in-charge, in each shutter.), completed all as per direction of Engineer-In-Charge. |
| 33 | M&L for powder coated aluminium anodised window sliding type 3 track (2nos glazed shutter and one gauzed shutter) with sash bar,aluminium section weighing 0.55 kg/m(min) including stainless steel wiremess,necessary joining cleats,glazing clips,rubber packing anodised aluminium snap beading,screws suitable anodised fitting such as ,hinges,handles,including anodised aluminium frame,with one or more rebate including S&F 5 to 6 mm thick black glass and ss wire mess including all as specified & directed by engr-in-charge. |
| 34 | Supply & fix anodized aluminium glazed window/ventilators, louvers side hung type with projecting type hinges using 1.80mm thick aluminium section having size of styles & top rails 44x44mm. bottom rails 44x44mm (Make: Jindal/ Hindalco) including necessary joining cleats, glazing clips, rubber packing anodized aluminium snap beading screws, anodized aluminium fittings etc complete all as specified & directed. |
| 35 | Supply and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm),T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear madeof mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.( The unit rate quoted by contractor included all connected accessories , Net opening will be measured for payment purpose.) |
| 36 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,The unit rate quoted by contractor included all connected accessories like glass (4 to 5 mm thick) and wiremess etc, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 37 | Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde F-165,and including dismantling of existing frame. complete all as specified & directed by engineer-in-charge. |
| 38 | S&F Brand factory made 18 to 20 mm solid WPC (wood polymer composite) plain board of reqired size comprising of virgin PVC resin of K.valve57-60(suspended grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives,made from extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufactured by as ISO 9001-2015 cerified company, having good screw holding capacity (Screw withdrawal strength of 2000N (face)&1100(Edge),minimum compressive strength of 50N/sqmm ,modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free,water/moisture proof,fire retardant,for Cabinet/Kitchen,Cupboard,etc fixing with and including necessary accessories like necessary frame ,SS auto hinges,SS fancy type 125mm handle,magnetic catcher and fixed with full body threaded star headed counter sunk SS screws,etc complete all as specified and directed. |
| 39 | S&F in repair stainless steel plain basket of size 17''x20''x6''.Complete all as specified and as directed by Engr-in-charge. |
| 40 | S&F in repair stainless steel partion of size 17''x20''x6''.completed all as specified and as directed by Engr-in-charge. |
| 41 | S&F in repair stainless steel cutlery of size 17''x20''x6''.completed all as specified and as directed by Engr-in-charge. |
| 42 | S&F in repair stainless steel grain trolly with stand of size 21''x17''x10''.completed all as specified and directed by Engr-in-charge. |
| 43 | S&F in repair stainless steel plate basket of size 17''x20''x6''.completed all as specified and as directed by Engr-in-charge. |
| 44 | S&F in repair 20'' long telescopic sider to facilitate drawer slide on steel ball bearing fixed with steel screws.Completed all as specified and as directed by Engr-in-charge. |
| 45 | M&L for repairing of door, windows, ventilator, gates etc including cutting, dismantling or taking down and welding works and refixing in the same position complete all as specified and directed |
| 46 | Material & labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed. |
| 47 | Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 48 | Material & labour for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 49 | Material & labour for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 50 | Supply & fix in repair 25mm dia stainless steel type curtain rod as approved by GE including brackets and fancy type end knobs, rings etc complete all as specified and directed by engineer-in-charge. |
| 51 | Supply & fixing in repair aluminium door lock complete all as specified & directed. |
| 52 | M&L for Brickwork with subclass ‘B’ bricks (old size), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 (1 cement : 6 coarse sand), including all necessary scaffolding, raking out joints, curing, including demolition of existing brickwork built in cement mortar (including all quoins, arches, pillars, etc., ) and stacking of serviceable materials and disposal of unserviceable materials as directed.finishing complete in all respects as specified and directed by the Engineer-in-charge. |
| 53 | Material and labour for rendering, 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar (1:6), surfaces finished even and fair with neccesary scaffolding complete all as specified and directed. |
| 54 | Material and labour for rendering, 15 mm(10+5 in two coat) thick on other than fair faces of brick work or concrete surfaces of walls in cement mortar (1:4), surfaces finished even and smooth with neccesary scaffolding complete all as specified and directed. |
| 55 | M&L for 15 mm thick cement rendering in patches or over fair faces of brickwork or concrete surfaces, finished even and fair, using Cement Mortar 1:6 (1 cement : 4 fine sand), including disposal of rubbish within 50 metres lead, scaffolding, and curing ,including taking down existing cement plaster from brick walls or concrete surfaces(including raking out joints to a minimum depth of 15 mm ,hacking concrete surfaces for key), scrubbing down and cleaning with water to remove all loose particles.complete all as specified and directed by the Engineer-in-Charge; |
| 56 | Material and labour for preparing of newly plastered surfaces of walls and 2mm wall care putty then applying two coats of OBD with roller finish complete all as specified and directed. |
| 57 | Material and labour for preparing of newly plastered surfaces of walls and 2mm wall care putty then applying two coats of 100% Premium acrylic emulsion paint with automatic airless spray machine complete all as specified and directed by engineer-in-charge. |
| 58 | Material and labour for preparing of old surfaces of walls and applying two coats of Distempering walls with distemper oil emulsion with roller finish complete all as specified and directed. |
| 59 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces and preparation of old surface with automatic airless spray machine as specified and directed by engineer-in -charge. |
| 60 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.laid over and included 15 mm thick screed bed in cement mortar 1:6 and dismantling ,floor,heart or wall tiling(including cement mortor bedding but not backing and removing rubbish off the premises) completed all as specified and directed |
| 61 | Material and labour for glazed ceramic coloured tiles (premium quality) of size 450X300/350X7 mm thick as in skirting/dado set, jointed in near cement slurry and pointed in white/coloured cement to match, laid over and including 10 mm thick rendering in cement mortar 1:4 ,and dismantling ,floor,heart or wall tiling(including cement mortor bedding but not backing and removing rubbish off the premises)complete all as specified and directed. |
| 62 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and included 15 mm thick screed bed in cement mortar 1:6 and dismantling ,floor,heart or wall tiling(including cement mortor bedding but not backing and removing rubbish off the premises) completed all as specified and directed |
| 63 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting and dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and included 10 mm thick rendering in cement mortar 1:4 and dismantling ,floor,heart or wall tiling(including cement mortor bedding but not backing and removing rubbish off the premises) completed all as specified and directed |
| 64 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4)including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,laid over included 15 mm thick screed bed in cement mortar 1:6 completed all as specified and directed by Engineer-in-charge |
| 65 | Material and labour for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in foundation filling and mass concreting etc complete all as specified and directed. |
| 66 | Supply & fix in repair 50 mm wide upto 5mm thick rubber beading for doors of required size complete all as specified & directed. Please Enable Macros to View BoQ information |
