|
| 1 | Taking down cement plaster of any description on brick or stone walls or in concrete surfaces as in drain etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 2 | Material & Labour for rendering 15mm thick plastering in CM 1:4 on brick/PCC block surface or concrete surfaces of external wall surfaces and fininshing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 3 | Material & Labour for rendering 10mm thick plastering in CM 1:6 on brick or concrete surfaces of internal wall and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge |
| 4 | Material & Labour 5mm thick rendering in CM 1:3 on concrete surface of ceiling and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge |
| 5 | Material and labour for preparation of new plastered surfaces of wall & applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.Make : Snowcem/Duracem/Aquacem/Berger/Shalimar/Birla Opus Paint |
| 6 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer complete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India/ Birla Opus Paint ( Brand- One True life) |
| 7 | Material & Labour for preparation of newly plastered wall surfaces and applying two coats of oil bound Distemper over a coat of alkalic resistant primer all as specified and directed by Engineer-in-charge.Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints / Birla Opus Paints |
| 8 | Material & Labour for preparation of new plastered surfaces of ceilings and applying three coat of white wash complete all as specified and directed. |
| 9 | Material and labour for washing, rubbing down and stopping of old distempered and painted surfaces of wall and applying two coat of oil bound distemper with roller upto height of the bldg with safety belts/scaffolding etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints / Birla Opus Paints |
| 10 | Material & Labour for one coat of Oil bound distemper on old wall surfaces including washing rubbing down and stopping of distempered and painted surfaces of existing treatment including formwork, safety belts all as specified and directed by Engr-in-charge and as per manufacturers instructions. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints / Birla Opus Paints |
| 11 | Material & Labour for one coat of Oil bound distepmer on old ceiling surfaces including Washing, rubbing down and stopping of distempered and painted surfaces of existing treatment including formwork, safety belts all as specified and directed by Engr-in-charge and as per manufacturers instructions. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints / Birla Opus Paints |
| 12 | Material & Labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make: Berger paints/Asian paints/Shalimar paints/ Birla Opus paint |
| 13 | Material & Labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make: Berger paints/Asian paints/Shalimar paints/ Birla Opus paint |
| 14 | Material & Labour french polishing on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wooden filler on old works with one or more coats complete all as specified and as directed by Engr-in-Charge |
| 15 | Material and labour for preparation of wall surfaces and applying 1.0 mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty |
| 16 | Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed.Make : M/S Johnson Peddar/ Parryware/ RAK Ceramics/ CERA |
| 17 | Supply & Fix in repairs wash basins, vitreous china(flat back or angle back type) size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of supply and waste pipe complete all as specified and directed by Engr-in-Charge. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT) |
| 18 | Supply and fix in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with long screwed shanks and fly nuts, screwed iron pipe all as specified and as directed. Make : Jaquar (Essco)/Prayag / Seiko |
| 19 | Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge.Make : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 20 | Supply & Fix in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge.Make : Modi/ Atul/ Saint Gobain |
| 21 | Supply & Fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 22 | Supply and fix in repairs cabinet mirror 400 x 500mm, PTMT, 2mm thick complete all as specified and as directed by Engineer-in-ChargeMake- Prayag/Cera |
| 23 | Supply and fix in repairs CI floor trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge.Make : Electro-Steel/ Kejriwal/ NECO/ Kesoram |
| 24 | Supply & Fix in repairs Tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed |
| 25 | Supply & Fix in repairs Harrison rails, powder coated anodised aluminium alloy, with fixing brackets, stops, rollers etc complete all as specified and as directed |
| 26 | Supply and fix in repairs, UPVC Nahani trap,100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge.Make : Supreme/ PRINCE (Ultrafit)/ KSR/ Finolex/ Astral |
| 27 | Supply & Fix in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson |
| 28 | Supply & Fix in repairs, Health faucet (ABS Body) mild steel croumium plated suitable for 15 mm dia pipe with 1.25 mm long fexible tube and ABS wall hook including making connections complete all as specified and directed. Make : CERA/ Hindustan/Parryware/Jaguar/Hindware/ Johnson |
| 29 | Supply and fix in repairs plastic seat cover, black, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging devicecomplete all as specified and directed by Engineer-in-Charge.Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson |
| 30 | Supply & Fix in repairs brass chromium plated 125mm Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.Make : Supreme/ PRINCE (Ultrafit)/ KSR/ Finolex/ Astral |
| 31 | Supply & Fix in repairs Brass CP mixer for mxing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar, Marc,CERA,Kohler, Player, Soma, Leade Zoloto |
| 32 | Supply & Fix in repairs stainless steel sink without drainage board,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm, complete all as specified and directed. Make : Diamond / Nirali / Neelkant/Parryware/Prayag |
| 33 | Material & Labour for 15mm thick rendering in cement mortar (1:3) on SUNKAN floor including water proofing compound as per specified including vertical surfaces up to 450 mm hight and using and applying a coat of Raincoat soulation of Make Dr Fixit and equvaint with uniform surfaces and Supply & Fix for vitreous china squatting pan, 'Orrisa' pattern, size 580 x 440mm including 'P' trap and connector pices of CI Pipe as per required upto T /Y joint including filling PCC 1:4:8 type D2 and over 40 mm thick PCC 1:2:4 for sub base type B 2 for uniform surfaces and GI Spout with 50 mm dia to provide that 450mm long to be extended front out surfaces of wall all as specified ad directed by Engr-in Charge . |
| 34 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed. |
| 35 | Material & Labour for non skid ceramic tiles (600x600mm) x 7mm to 8mm thick thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed of cement mortar 1:4 complete all as specified and directed by Engineer -in-charge Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles |
| 36 | Material and labour for coloured ceramic tiles, 1st quality, on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-ChargeMake: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles |
| 37 | Material and labour for coloured glazed ceramic tiles of size 250 x 350mm x 7 mm thick/ 300mm x 450mm x 7mm (or nearest size) ,on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles |
| 38 | Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 15mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles |
| 39 | Taking down Chowkhats or frames exc. 1.5 sqm but n exc 4 sqm. m each (Without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 40 | Taking down Chowkhats or frames not exc. 1.5sq. m each (Without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 41 | Taking down shutters exc 1 sq. m and n exc 2 sq. m each & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 42 | Taking down shutters n.exc 1 sqm, Resecuring or easing and refixing in the same opening after repair complete all as specified and directed. |
| 43 | Taking down shutters exc 1 sqm and n. exc 2 Sqm, Resecuring or easing and refixing in the same opening after repair complete all as specified and directed. |
| 44 | Repair of PVC door including taking down & refixing of shutter in the same opening after repair with necessary 'T' hinge plates stove enameled etc wirh necessary welding & reviting complete all as specified and directed. Note- Renewal of builder's hardware articles, other than specified, if specially ordered, shall be paid seperately. |
| 45 | Supply & Fix Factory made single extruded WPC (wood polymer composite) soild door/ window/ ceosetory windows & other frames/chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: M/S hold fast or SS dash fastners shall be paid for separately. Make: Rajashri/Giza/Echon/Floresta Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 46 | Supply & Fix Factory made single extruded WPC (wood polymer composite) soild door/ window/ ceosetory windows & other frames/chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: M/S hold fast or SS dash fastners shall be paid for separately. Make: Rajashri/Giza/Echon/Floresta Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 47 | Supply & Fiix Factory made single extruded WPC (wood polymer composite) soild decorative type flush door shutter of size 35mm thick comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) and having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N(face) and 900 N(edge), minimum compressive strength of 50 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant WPC to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk ss screws complete all as specified as directed by Engineer-in-charge. Note: SS butt hinges and SS screws shall be paid seprately. Make: Rajashri/Giza/Echon/Floresta |
| 48 | Supply & Fix 35mm thick 2nd class hard Sal wood glazed & skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, complete all as specified and as directed by Engineer-in-Charge. Make : M/S Goel Brothers, Raipur/ M/S Pioneer Timber, Chandigarh/ M/S Goyal Industries, New Delhi/ M/S Jain Doors Pvt Ltd, Haryana/ M/S India Wood & Wood P Ltd Mangalore/ M/S MP Wood Products, Indore |
| 49 | Material & Labour for 30 mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 50mm x 47mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm (+0.25) thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel design in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm (+0.25) plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel butt hinges of size 100mm x 25mm x 2mm and 50 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube other hardware should be fixed with 25mm x 8mm size steel screws etc, complete as per manufacturer's specification and drawing or direction of Engineer-in-charge Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ |
| 50 | Supply & Fix in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded prelam PVC sheet (both side ) 'C' channel having a PVC sheet strip in 20 mm width strck inside with solvent cement for stiles and rails ( feather edges ) pre Lam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointing together with solvent cement suppling and fixing in the frame at site as per specification and drawing complete all as specified and as directed by Engineer-in-Charge.Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S TUFFFLON/M/S Dura Plast Extrusion |
| 51 | Supply & Fix 100 mm long butt hinges, medium weight, stainless steel complete all as specified and as directed.Make : Classic/ Shalimar/ CLIF/ARGET |
| 52 | Supply & Fix 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.Make : Classic/ Shalimar/ CLIF/ARGET |
| 53 | Supply & Fix aluminium anodised barrel tower bolt of extruded section size 150mm ISI marked complete all as specified and as directed.Make : Classic/ Shalimar/ CLIF/ARGET |
| 54 | Supply & Fix 150 mm long extruded aluminium alloy handles fabricated type anodised ISI marked complete all as specified and as directed.. |
| 55 | Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Classic/ Shalimar/ CLIF/ARGET |
| 56 | Material & Labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling. C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Note:- (i) Glass panes will be measured and paid separately. (ii) Rubber beading will not be weighed. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India |
| 57 | Material & Labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for eparately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit IndiaNote:(i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed. |
| 58 | Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of SIZE 38mm x 12mm x 1.3 mm of Decogrille or equivalent , cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE |
| 59 | Supply & Fix in repairs 4 mm thick glass ordinary quality in square exc 0.5 Sqm each complete all as specified and directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 60 | Supply & Fix 4 mm thick figured glass, pin head type in square n.exc 0.5 sqm each pane complete all as specified and as directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 61 | Supply & Fix Aluminium anodised wire cloth 0.45 nominal dia of wire and average width of aperture 1.40 and fixed with stainless steel wire staple complete all as specified and as directed by Engineer-in-Charge |
| 62 | Supply & Fix in repairs aluminium anodised wire cloth 0.45 nominal dia of wire and average width of aperture 1.40 and fixed with stainless steel wire staple complete all as specified and as directed by Engineer-in-Charge |
| 63 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. |
| 64 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. |
| 65 | Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 66 | Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 67 | Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC casing & capping (not less than 20mm wide) (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete and including taking down copper/aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., for one light /Exhaust fan / bell point controlled by one, one way switch all as specified and as directed.Make of Cable- Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GEMake of PVC Casing Capping-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 68 | All as per item No. 67 here-in-before but for fan point controlled by one, one way switch |
| 69 | All as per item No. 67 here-in-before but for one 3 pin 5/6 Amps socket outlet point on independent board |
| 70 | All as per item No. 67 here-in-before but for one 3 pin 5/6 Amps socket outlet point on the same board with other switches controlled by one switch. |
| 71 | All as per item No. 67 described here - in - before but for 3 pin 15/16 Amps socket outlet point on independent board with 2.5 sqmm copper cable and provision of 2.5 sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fix LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including 02 Nos of PVC square /round boxes , screws clips including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make: Phillips/Havells/Bajaj. |
| 73 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection, connection with three core copper flexible cable 16/0.20 mm from ceiling rose to fitting complete all as specified and as directed by Engineer-in-Charge.Make : Philips / Bajaj / Wipro |
| 74 | Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down existing light fittings etc complete all as specified and directed by Engr-in-charge. Make: Havells/Philips / Bajaj |
| 75 | Supply and fix Switch Piano, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 76 | Supply and fix Bell push, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 77 | Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 78 | Supply and fix Ceiling rose, surface type Bakelite, three terminal PVC/polycarbonate isolated body, 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 79 | Supply and fix Switch Piano, flush type, single pole, one way, 15 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 80 | Supply and fix socket outlet, 2 in 1, 3 Pin, 5 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 81 | Supply and fix socket outlet, 2 in 1, 3 Pin, 15 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 82 | Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet,100W, 230 V etc Each complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 83 | Supply and fix in repairs SPN sheet metal enclosures with two pin and earth plug and socket controlled by Each MCB SP 20Amps, 240volts etc complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / Siemens / Schneider |
| 84 | Supply and fix in repairs Sheet metal enclosure concealed to the wall for 12 way Distribution Boards (DB's), double door, single pole & neutral with 100 amps rated bus bar, suitable for fixing MCBs/RCBOs all as specified and directedMake : Legrand / L&T / Havells / Siemens / Schneider |
| 85 | Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 100 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specifiedMake : Legrand / L&T / Havells / Siemens / Schneider |
| 86 | Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB SPN 4 way fitted with neutral link, earth bar , din rail and 100 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified Make : Legrand / L&T / Havells / Siemens / Schneider |
| 87 | Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB TPN 4 way fitted with neutral link, earth bar, din rail and 200 amps rated bus bar 415 volt conforming to IS 13032-1991 complete all as specified Make : Legrand / L&T / Havells / Siemens / Schneider |
| 88 | Supply and fix in repairs MCB TPN, 40 Amps to 100 Amps, 415 volts, 10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / Siemens / Schneider |
| 89 | Supply and fix in repairs MCB SPN, 32 Amps, 240 volts, 10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / Siemens / Schneider |
| 90 | Supply and fix in repairs MCB SP, 6 Amps to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / Siemens / Schneider |
| 91 | Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm dia including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 6.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6.0sqmm PVC insulated cable and one run of 6.0sqmm cable and one run of PVC conduit shall be measured as one unit length.Make of Cable- Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GEMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 92 | Material and labour for submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm dia including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit shall be measured as one unit length.Make of Cable- Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GEMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 93 | Material and labour for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed uplo minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.3 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Material and labour for point wiring with proper colour coding complete with and including PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLS cable 1.5 Sqmm (22/0.30) 1100 volt grade confirming to IS 694 drawn through in and including (medium grade) rigid non metallic PVC conduit pipe 20 mm size ISI marked with conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chases for concealed conduit with all surfaces by means of screws and sunk / cup washers, for mounting of switches sockets fan regulators etc including modular sunken boxes with cover plate and 1.5 sqmm (22/0.30) 1100 volts grade PVC Insulated FRLS unsheathed flexible, multi stranded copper conductor cable (green colour) as continuous earthwire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end complete and including taking down copper/aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc.,for one light /Exhaust fan/ bell point controlled by one, one way switch complete all as specified and as directed.Make of Cable- Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GEMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 95 | All as per item No. 94 here-in-before but for ceiling fan point controlled by one, one way switch |
| 96 | All as per item No. 94 here-in-before but for one 3 pin 5/6 Amps socket outlet point on independent board |
| 97 | All as per item No. 94 here-in-before but for one 3 pin 5/6 Amps socket outlet point on the same board with other switches controlled by one switch. |
| 98 | All as per item No. 94 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5 sqmm copper cable single core and provision of 2.5 sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete. |
| 99 | Material & Labour for Point wiring for AC & Geyser with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of appropriate thickness covered with suitable and required size of modular box, plate with cover for mounting modular switches for one 16 amp socket outlet controlled by one switch on independent board complete.Make of Cable- Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GEMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 100 | Supply and fix in repairs Modular type fan regulator rotary step deluxe, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor(Panasonic) / Legrand / Havells/.Crabtree/Leader |
| 101 | Supply and fix in repairs Modular type bell push one module for call bell single pole one way 6 Amps, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor(Panasonic) / Legrand / Havells/.Crabtree/Leader |
| 102 | Supply and fix in repairs Modular type socket outlet 2 in 1, 3 Pin, 16 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor(Panasonic) / Legrand / Havells/.Crabtree/Leader |
| 103 | Supply and fix in repairs Modular type socket outlet 2 in 1, 3 Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor(Panasonic) / Legrand / Havells/.Crabtree/Leader |
| 104 | Supply and fix in repairs Modular type switch single pole one way 6 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor(Panasonic) / Legrand / Havells/.Crabtree/Leader |
| 105 | Supply and fix in repairs Modular type switch single pole one way 16 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor(Panasonic) / Legrand / Havells/.Crabtree/Leader |
| 106 | Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Anchor / Legrand / Havells/.Crabtree/Leader |
| 107 | Taking down Ceiling Fan/ Exh fan of any make, type and sweep by disconnecting Electric Connection and keeping in MES store yard. |
| 108 | Hanging only old ceiling fan/ Exh fan obtained from above and connecting up including provision of cable from ceiling rose or connector to fan. |
| 109 | Supply & Fix air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louver shutter complete all as specified and directed, including hole & make good the wall surface complete.Make: Usha, Crompton Greaves, Khaitan, Bajaj, orient |
| 110 | Supply and fix exhaust fan, AC, single phase, 230V, 300mm sweep, 1200 RPM, 5 blade, plastic body & blade with louver for protection of bird and rain water including cutting round shape in wall, grouting the foundation bolt in the wall, making good the disturbed surfaces of wall including rendering, painting to match the existing surfaces and connecting up with three core flexible copper conductor cable of size 24/0.20sqmm etc from ceiling rose to fitting complete all as specified and as directed by Engr-in-Charge. Make: Usha, Crompton Greaves, Khaitan,Bajaj, orient |
| 111 | Supply and fix in repairs Indoor Decorative light, wall mounting, Metal, glass chrome, 220-240 V with B22 LED bulb of 9 Watts including connecting up with three core flexible copper conductor cable of suitable size including taking down existing light fittings etc complete all as specified and directed by Engr-in-charge. Make : Havells cat no LHFOAKD1TZ1D060 or equivalent of Wipro / Bajaj. |
| 112 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 37,226.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Please Enable Macros to View BoQ information |
