Tender For Addition/ Alteration And Special Repair To P2 Building (Winch Room) At Timber Pond / Boat Basin Inside Chennai Port Under Ge (I) Cg Chennai
Tender Value
17.20 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
14 days left
EMD
34400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Special Repair To P2 Building (Winch Room) At Timber Pond / Boat Basin Inside Chennai Port Under Ge (I) Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | SPECIAL REPAIR WORK |
| 2 | Demolition of brickwork/stone masnory built in cm including all quoins, arches, pillars,etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 3 | Materials and labours for Brickwork with Flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 4 | Materials and labours fly ash brick work modular size with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick or stone walls,etc including raking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed. |
| 6 | Materials and labours for rendering 15mm thick in cm 1:4 cement plaster on fair faces of brick or concrete surfaces finished even and smooth without using extra cement, with water proofing compound @3% by weight of cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately. |
| 7 | Materials and labours for rendering 15mm thick in cm 1:6 cement plaster on fair faces of brick or concrete surfaces finished even and smooth without using extra cement, with water proofing compound @3% by weight of cement complete all as specified and as directed.Note:- WPC shall be measured and paid complete all as specified. |
| 8 | Supply only integral water proofing compound |
| 9 | Materials and labours for preparation of newly plastered surfaces of walls including pilasters and cornices etc and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and directed. |
| 10 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as complete all as specified and as directed. |
| 11 | Dismantling of Asbestos cement corrugated, semicorrugated, etc., sheets in roof coverings as complete all as specified and as directed. |
| 12 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as complete all as specified and as directed. |
| 13 | Supply and fix for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 14 | Supply and fix in Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 15 | Demolition of PCC in ground floor and paving n.exc 15 cm thick (below or above ground level) etc., complete all as specified and as directed. |
| 16 | Materials and labours for Cement concrete type D-2, 1:4:8 (40 mm grade aggregate) 100mm thick in Sub base floors complete all as specified and as directed. |
| 17 | Forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compund Grade 'B' complete all as specified and as directed. |
| 18 | Materials and labours for preparation of old plastered surface of walls including pilasters and cornices etc and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 19 | Material and Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over old surfaces complete all as specified and as directed. |
| 20 | Materials and labours for preparation of new painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over priming complete all as specified and as directed. |
| 21 | Materials and labours for preparation of old painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over priming with red ixide zinc complete all as specified and as directed. |
| 22 | Materials and labours for Preparing of new painted wood and wood based materials new of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over pink priming complete all as specified and as directed. |
| 23 | Supply and Fix of vitreous china wash basin, white, flat back, size 580x450 mm excluding taps, waste, chain and plug and porcelin stopper but including breckets complete all as specified and as directed. |
| 24 | Supply and fix Rotational moulded polyethylene 2000 lt water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 25 | Supply and fixed in repairs Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20 mm bore complete all as specified and as directed. |
| 26 | Supply and fix 20mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc., complete all as specified and as directed. |
| 27 | Supply and fix 25mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc., complete all as specified and as directed. |
| 28 | Supply and fix of 15mm dia Bibtaps fancy type chromium plated cast copper alloy with capstian head, curtch or butter fly handles screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 29 | Supply and fix of15mm dia Piller taps fancy type chromium plated cast copper alloy with capstian head, curtch or butter fly handles screwed down, high pressure with or without lettered hot or cold with long screwed shanks and flu nuts screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 30 | Supply and fix of 15mm dia stop cock fancy type chromium plated cast copper alloy with capstian head, curtch or butter fly handles screwed down, high pressure with or without lettered hot or cold with long screwed shanks and flu nuts screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 31 | Supply and fixed of Waste fittings, 32mm bore, brass ,chromium plated for glazed ware sink or basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm bore PVC low density polyethylene waste pipe complete all as specified and as directed. |
| 32 | Supply and fixed of 15 mm dia PVC connection pipes of 375 mm long with PTMT nut at both ends complete all as specified and as directed. |
| 33 | Cutting chases, pinning in, making good to brick facing where required and pointed in cement mortar 1:3 and making good cutting exceeding 10 cm exc 20 cm girthcomplete all as specified and as directed. |
| 34 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and as directed. |
| 35 | Materials and labours for 25 mm thick PCC type B-0 (1: 2:4) using 12.50 mm graded aggregate as in roof padding finished even & fair surfaces complete all as specified and as directed. |
| 36 | Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed. |
| 37 | Materials and labours for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed. |
| 38 | Materials and labours for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed. |
| 39 | Supply and fix for industrial non skid tiles 10-12mm thick (square or rectangular) area of each tiles n.exc 0.18 Sqm as including 10mm thick rendering in cement mortar 1:4 set jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed. |
| 40 | Supply and fix for 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: gear operated type with bevel gear box and crank handle complete all as specified and as directed. |
| 41 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed.. |
| 42 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 and 4 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed.. |
| 43 | Supply and fix for Powder coated aluminium frame & grills for windows & ventilators with one or more rebates including joining cleat and powder coating for fixing etc.,complete all as specified and as directed. |
| 44 | Supply and fix for powder coated aluminium window and ventilator shutters, sliding type without sash bars of aluminium section of weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc., complete all as specified and as directed. |
| 45 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of complete all as specified and as directed. |
| 46 | Supply and fix for plain glass Sheet pane 4.8mm thick, ordinary quality and glazing with oil putty in square exc 0.5Sqm each pane complete all as specified and as directed. |
| 47 | Supply and fix 2nd class hard wood 35 mm thick factory made plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density,wood particle board with commrercial face veneers fitted to chowkats with rail and stile as per IS-1003(part-1)klin seasoned and chemically pressure treated complete all as specified and as directed. |
| 48 | Supply and fix 2nd class hard wood (SAL) plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint complete all as specified and as directed.. |
| 49 | Supply and fix Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand all complete all as specified and as directed. |
| 50 | Supply and fix aluminium anodised barrel tower bolt 200 mm complete all as specified and as directed. |
| 51 | Supply and fix 250 mm long Aluminum alloy anodised, sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all complete all as specified and as directed. |
| 52 | Supply only Mild steel Butt hinges, medium weight, cold rolled of size 100mm complete all as specified and as directed |
| 53 | Supply and fix 150 mm aluminium alloy handle anodised fabricated type complete all as specified and as directed. |
| 54 | Materials and labours for framed work for gates such as grills, gratings, etc, with end of bar shoulder & or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing , frame work of water tanks & similar work conforming to Fe290 GDE-E-165 and extra only over for portion framed & hung as gates, including pintle hinges, stop, hand made sliding bolts, etc. including for ornamental & intricate design complete all as specified and as directed. |
| 55 | Supply and fix for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 57 | Supply and fix 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified and as directed. |
| 58 | Supply and fix 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and as directed. |
| 59 | Supply and fix PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and as directed. |
| 60 | Supply and fix bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed. |
| 61 | Supply and fix PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and as directed. |
| 62 | Supply and fix 110mm bore PVC (SWR) junction, single (single T) equal or unequal with or without door access complete all as specified and as directed. |
| 63 | INTERNAL ELECTRIC SUPPLY |
| 64 | Taking down copper/aluminium point wiring (light,fan, socket or power complete ) including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings,calling bell etc revoing materials to store for taking credit and making good the distrubed surface of wall / ceiling /floor etc., complete all as specified and as directed. |
| 65 | Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc., complete all as specified and as directed. |
| 66 | Taking down carefully unservice able TPN/SPN DB with MCB complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc., complete all as specified and as directed. |
| 67 | Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non mteallic rigid PVC conduit of size 25 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including PVC recangular board of adequate size for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii)Make of PVC Conduit :Avon Plast/ Presto Plast/ Finolex One light point/Fan point controlled by one switch |
| 68 | One light point controlled by one switch. |
| 69 | One fan point controlled by one switch. |
| 70 | Supply and fix wire for circuit/sub main wiring with 1100 volts grade PVC insulated and sheathed cable with stranded copper conductor 16 Sqmm, on surface or recessed or drawn in PVC casing caping along with 16.0 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.Notes: (i) Five different color wires shall be used for phase, neutral and Earth. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . |
| 71 | Supply and fix wire for circuit/sub main wiring with 1100 volts grade PVC insulated and sheathed cable with stranded copper conductor 10 Sqmm, on surface or recessed or drawn in PVC casing caping along with 10.0 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.Notes:(i) Five different color wires shall be used for phase, neutral and Earth. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . |
| 72 | Supply and fix wire for circuit/sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing caping along with 4.0 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.Notes: (i) Three different color wires shall be used for phase, neutral and Earth. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . |
| 73 | Supply and fix wire for circuit/sub main wiring with 1100 volts grade PVC insulated and sheathed cable with stranded copper conductor 2.5 Sqmm, on surface or recessed or drawn in PVC casing caping along with 2.5 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.Notes:(i) Three different color wires shall be used for phase, neutral and Earth. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . |
| 74 | Supply and fix wire for circuit/sub main wiring with 1100 volts grade PVC insulated and sheathed cable with stranded copper conductor 1.5 Sqmm, on surface or recessed or drawn in PVC casing caping along with1.5 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.Notes: (i) Three different color wires shall be used for phase, neutral and Earth. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . |
| 75 | Supply and fix Switch piano flush type single pole one way 6 Amp complete all as specified and as directed. |
| 76 | Supply and fix Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and as directed. |
| 77 | Supply and fix Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and as directed. |
| 78 | Supply and fix ceiling rose, surface type, PVC of 25x50mm, two to three terminals AC 240V complete all as specified and as directed. |
| 79 | Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar TPN 4 way complete all as specified and as directed. |
| 80 | Supply and fix MCB TPN 100Amps, 415 Volts, Repturing capacity 16kA complete all as specified and as directed. |
| 81 | Supply and fix MCB TP 63Amps, Repturing capacity 16Ka complete all as specified and as directed. |
| 82 | Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 4 way complete all as specified and as directed. |
| 83 | Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 8 way complete all as specified and as directed. |
| 84 | Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 12 way complete all as specified and as directed. |
| 85 | Supply and fixing amp rating SPN 32 AMP 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 86 | Supply and fixing amp rating SP 6 To 32 AMP 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 87 | Supply and fixing sheet metal enclosure with socket plug top and MCBs complete single pole and neutral enclosure with 3- Pin and earth plug and socket complete with single pole MCB 30 Amp capacity including fixing in walls dully embedded complete all as specified and as directed. |
| 88 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 89 | Supply and fix LED luminaire 600mm x 600mm(2'x2'), 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 90 | Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. |
| 91 | Supply and fix LED light fitting 2 feet white, 10W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. |
| 92 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test points all as specified or indicated including 25 Kgs of Bentonite and excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 40mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with 40mm dia protection pipe and 20mm dia medium grade watering pipe, wiremesh and GI lugs, GI protection pipe and testing on completion . |
| 93 | Earth continuity conductor or main earthling lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop eatthing etc as required 32x6mm GI strip complete all as specified and as directed. |
| 94 | Supply and fix 5 Star rating ceiling fan 1200mm sweep Min air delivery 210 CFM with service value of 6.0 BEE five star rated with brush less direct current motor (BLDC).” suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor and including taking down old fans and removal to store complete all as specified and as directed. Make : Anchor/Havells/Crompton |
| 95 | Supply and fix exhaust fan heavy duty, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 96 | Supply and fix fans industrial wall mounted complete and accessories 230 V, 450 mm sweep complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 days