|
| 1 | M&L for complete removal of existing treatment and applying two coats of camouflage pattern exterior emulsion weatherproof paint of premium quality over by using mechanical spray (Maximum working pressure of 3300 PSI) and including one coat of ready-mix primer as per manufacturer’s instructions after preparation of surfaces, complete all as specified and directed. |
| 2 | M&L for preparation of new plastered/concrete surfaces and applying two coats of camouflage pattern exterior emulsion weatherproof paint of premium quality over a coat of ready-mix primer as per manufacturer’s instructions over a coat of wall care putty (minimum 2 mm thick) complete all as specified and directed. |
| 3 | Taking down cement plaster on brick/stone walls or ceilings including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed . |
| 4 | M&L for rendering 10 mm thick in CM 1:6 on concrete block masonry surfaces (internal wall surfaces), finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in CM 1:4 on concrete block masonry surfaces (external wall surfaces), finished even and smooth without using extra cement , complete all as specified and directed. |
| 6 | Supply only water proofing compound complete all as specified and directed |
| 7 | M&L for preparation of new plastered wall surfaces of any description including cornices and applying two coats of weatherproof exterior emulsion paint by using mechanical spray (Maximum working pressure of 3300 PSI) over a coat of exterior primer, complete all as specified and directed. Note: Exterior emulsion shall be applied through applicator of approved make all as specified and directed by Engineer-in-charge. |
| 8 | M&L for preparation of new plastered wall surfaces by washing and applying two coats of acrylic washable distemper by using mechanical spray (Maximum working pressure of 3300 PSI) over a coat of alkali-resistant priming paint, complete all as specified and directed. |
| 9 | M&L for preparation of old plastered / decorated wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of weather proof exterior emulsion paint by using mechanical spray (Maximum working pressure of 3300 PSI) complete all as specified and directed. Note: Exterior emulsion shall be applied through applicator of approved make all as specified and directed by Engineer-in-charge. |
| 10 | M&L for preparation of old painted plastered surface of walls/ceiling/chajja of any description including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of weather proof exterior emulsion paint by using mechanical spray (Maximum working pressure of 3300 PSI) complete all as specified and directed by Engineer-in-Charge. Note: Exterior emulsion shall be applied through applicator of approved make all as specified and directed by Engineer-in-charge. |
| 11 | M&L for preparation of old decorated surface of walls of any description and applying one coat of acrylic washable distemper by using mechanical spray (Maximum working pressure of 3300 PSI) all as specified and directed. |
| 12 | M&L for preparation of old decorated surface of ceiling of any description and applying one coat of acrylic washable distemper by using mechanical spray (Maximum working pressure of 3300 PSI) all as specified and directed. |
| 13 | M&L for preparation of old plastered / decorated wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying by using mechanical spray (Maximum working pressure of 3300 PSI) one coat of white wash complete all as specified and as directed. |
| 14 | M&L for preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel paint by using mechanical spray (Maximum working pressure of 3300 PSI) over 10 cm width or girth complete all as specified and directed. |
| 15 | M&L for preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint by using mechanical spray (Maximum working pressure of 3300 PSI) complete all as specified and as directed. |
| 16 | M&L for applying 2mm thk wall care putty on plastered/ unplastered surfaces of wall/ceiling etc complete all as specified and directed. |
| 17 | M&L for writing letters or figures in black letters on white base (Block, Roman, Italic or Indian) not exc 30 cm in height, stops, commas, short lines, dashes, hyphens, brackets etc complete all specified and as directed by Engineer-in-Charge. |
| 18 | M&L for cutting down plants/trees of upto 10cm girth and applying ROUNDUP/GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of building chajjas, wall junctions, at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicine making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type 'B0' (using 12.5mm graded stone aggregate) or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as specified and directed. Please Enable Macros to View BoQ information |
