Tender For Comprehensive Maintenance To Certain Officers Md Accn In Zone A Phase-Ii Township Area Under Ge(I) R&D (East), Bangalore.
Tender Value
1.10 Crore
Estimated cost
Bid Submission
14 Jul 2026
12 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To Certain Officers Md Accn In Zone A Phase-Ii Township Area Under Ge(I) R&D (East), Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed. |
| 2 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified and as directed. |
| 3 | Material and labour for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors with border design if required etc. set and jointed in neat cement slurry and pointed in white / coloured cement, laid over and including cement screed bed 15mm thick in cement mortar (1:6) etc complete all as specified and as directed. |
| 4 | All as per Ser Item No 3.00 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar (1:3), complete all as specified and as directed. |
| 5 | Material and labour for 25mm thick Plain Cement Concrete type B-1. 1:2:4 (20mm graded aggregate) as in sub base concrete or in similar works etc complete all as specified and as directed. |
| 6 | Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 7 | Material and labour for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match design over and including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed. |
| 8 | Material and labour for 18 to 20mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread and risers of steps, cooking platform, window cill / jambs, vertical surfaces etc laid on and including 15mm thick CM (1:4) bedding and pointed in white / coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and as directed. NOTE :- Colour of granite shall be as approved by Engineer-in-Charge. |
| 9 | Taking down chowkhats or frames with shutters without taking off shutters from frame area exc. 1.5 Sqm and n.exc 4 Sqm each of any description and in any position etc complete all as specified and as directed. |
| 10 | Taking down chowkhats or frames with shutters without taking off shutters from frame area n.exc. 1.5 Sqm each of any description and in any position etc complete all as specified and as directed. |
| 11 | Taking down shutters of any description area exc. 1.0 sqm but n.exc 2.0 sqm each etc complete all as specified and as directed. |
| 12 | Taking down shutters of any description area exc. 1.0 sqm but n.exc 2.0 sqm each and refixing in the same opening after necessary repairing, cutting etc complete all as specified and as directed. |
| 13 | Material and labour for pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling the frame portion with Plain Cement Concrete 1:2:4, type B1 and applying two coats of synthetic enamel paint of approved tint over a coat of primer etc supplied and fixed etc complete all as specified and as directed. |
| 14 | Supply and fix flush shutter 30mm thick, solid core construction, with particle board core and plywood face panels, commercial type with decorative choice lamination of both sides fixed with suitable adhesive including fixing around the edges of shutter etc complete all as specified and as directed. |
| 15 | Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and as directed. |
| 16 | Supply and fix factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed. |
| 17 | Supply and fix in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin, anodized of hinges 100 mm type B-21 etc complete all as specified and as directed. |
| 18 | Supply and fix extruded aluminum alloy handle fabricated type anodized 150mm long etc complete all as specified and as directed. |
| 19 | Supply and fix aluminum anodized barrel bolt of extruded section 150mm long etc complete all as specified and as directed. |
| 20 | Supply and fix aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc complete all as specified and as directed. |
| 21 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows & other Frames / Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 23 | NOTE :- Stainless steel butt hinges and necessary fittings shall be paid separately. |
| 24 | Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. |
| 25 | NOTE :- The unit rate quoted by contractor includes cost of glass, mesh and all other connected accessories for net opening will be measured for payment purpose. |
| 26 | Supply and fix stainless steel butt hinges of approved make made of SS grade 304, size 100mm fixed to shutter and frame with stainless steel screws etc complete all as specified and as directed. |
| 27 | Supply and fix stainless steel tower bolt of approved make made of SS grade 304, size 100 mm, fixed to shutter with stainless steel screws etc complete all as specified and as directed. |
| 28 | Supply and fix stainless steel door handle of approved make made of SS grade 304, size 150 mm, fixed to shutter with stainless steel screws etc complete all as specified and as directed. |
| 29 | Supply and fix stainless steel sliding door bolt (aldrop) of approved make made of SS grade 304, size 250 mm, fixed to shutter with stainless steel screws etc complete all as specified and as directed. |
| 30 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws and all fittings etc complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 31 | Supply and fix powder coated aluminium grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per requirement and direction of Engineer-in-Charge. |
| 32 | Supply and fix plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 33 | Supply and fix figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 34 | Supply and fix Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc complete all as specified and as directed. |
| 35 | Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and as directed. |
| 36 | Supply and fix in repairs, Door closer hydraulically regulated, Aluminium (diacast) body designation No. 2, universal type, suitable for door shutters of any width and weight 36 to 60 kg and fixed etc complete all as specified and as directed. |
| 37 | Supply and fix in repairs mortice lock brass vertical type 4 levers 100 mm complete all as specified and as directed.MAKE :- GODREJ or equivalent. |
| 38 | Supply and fix in repairs mortice lock Aluminium vertical type 4 levers 100 mm complete all as specified and as directed of MAKE :- GODREJ or equivalent. |
| 39 | Demolition of concrete of any description and in any position above or below ground level and debris off the premises (outside MD land) etc complete all as specified and as directed. |
| 40 | Material and labour for Plain Cement Concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate 25 mm thick mixed with and including WPC as in bedding of sunken portions with smooth finish etc complete all as specified and as directed. |
| 41 | Material and labour for rendering 10mm thick on brick or concrete surfaces in CM (1:4), mixing with and including water proofing admixture as per manufacture's instruction as in sunken portion complete all as specified and as directed. |
| 42 | Providing and laying water proofing treatment to sunken portion of WCs , Bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003. The following procedures to be adopted during the execution of work : |
| 43 | (i) Cleaning the sunken /lowered portion of RCC slab surface for full depth of sunken floor by wire brush, Chisel out any mortar sticking the surface, all pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out, one 40 mm dia PVC pipes , 35 cm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion (ii) Applying FOSROC Nitoproof 600PF (Minimum 0.8 mm dft ) over a priming coat of Nitoproof WB primer or Equivalent product of Asian paints , M/s MC Bauchemic / CIPY/ SIKA/ Pidilite Dr Fixit / TheRmax/STP applied as per manufacturers Instructions to bottom and full vertical sides of sunken floors all as directed. |
| 44 | Material and labour for Plain Cement Concrete in foundations, filling and mass concrete using type E2 (1:5:10) using 40 mm graded aggregate etc complete all as specified and as directed. |
| 45 | Material and labour for Providing plain cement concrete, type B1, (1:2:4), using 20 mm graded stone aggregate as in copings, borders, haunching etc,. rounded or chamfered on edges, complete all as specified and as directed. |
| 46 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed. |
| 47 | Supply and fix PVC (SWR) pipes 75 mm single socketed type 'B' including bends, elbows and all required fittings in any length with rubber ring joints, fixed to walls and laid in trenches complete all as specified and as directed. |
| 48 | Supply and fix PVC (SWR) pipes 110 mm single socketed type 'B' including bends, elbows, shoes and all required fittings in any length with rubber ring joints, fixed to walls and laid in trenches complete all as specified and as directed. |
| 49 | Material and labour in repairs to PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed. |
| 50 | Supply and fix in repairs vitreous china ware wash hand basin white flat back of size 550 x 400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed. |
| 51 | Supply and fix in repairs 15 mm bore pillar taps (Swan neck type), cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed etc complete all as specified and as directed. |
| 52 | Supply and fix in repairs 15 mm dia chromium plated cast copper alloy bib taps foam flow with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directe. |
| 53 | Supply and fix in repairs, long body bib tap without wall flange, foam flow, 15 mm dia chromium plated, fancy type, screwed down, screwed for iron pipe complete all as specified and as directed. |
| 54 | Supply and fix in repairs 15 mm pillar tap, fancy type, foam flow cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 55 | Supply and fix in repairs CP two way bib taps 15mm cast copper alloy fancy type with crutch or capstan head handle screwed down for Iron pipe and fixed etc complete all as specified and as directed. |
| 56 | Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 57 | Supply and fix in repairs white vitreous china single-piece European Water Closet (EWC) of approved make with integral flushing cistern of approximate size 700x360x750mm, floor mounted type, having soft-closing seat cover, P-trap or S-trap outlet as required, conforming to relevant IS standards, including all fittings such as flush mechanism, inlet connection, fixing bolts, rubber gasket, sealant, connection to soil pipe, testing and commissioning complete, including cutting and making good the walls and floors wherever required, complete as per manufacturer’s specifications and directions of the Engineer-in-Charge. |
| 58 | Supply and fix in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 59 | Supply and fix in repairs of Vitreous china squatting pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Supply and fix in repairs PVC valveless symphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified and as directed. |
| 61 | Supply and fix in repairs Brass chromium plated towel rail, 20mm dia D-type, 60cm long between flanges etc complete all as specified and as directed. |
| 62 | Supply and fix in repairs PVC connection 15 mm dia and 600 mm long with both and nuts etc complete all as specified and as directed. |
| 63 | Supply and fix in repairs looking mirror 600 x 450 mm bevelled edge of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed. |
| 64 | Taking up or down 20mm dia PVC or steel tubing connection, including cleaning and refixing complete all as specified and as directed. |
| 65 | Taking up or down 25mm dia PVC or steel tubing connection, including cleaning and refixing complete all as specified and as directed. |
| 66 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 67 | Supply and fix in repairs 20mm bore unplasticized PVC pipe of pressure ratings 10 kgf / Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed. |
| 68 | Supply and fix in repairs 25mm bore unplasticized PVC pipe of pressure ratings 10 kgf / Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed. |
| 69 | Supply and fix GI tubes of 20mm dia medium grade with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and as directed. |
| 70 | Supply and fix GI tubes of 25mm dia medium grade with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and as directed. |
| 71 | Material and labour for SMP Magma factory made 18mm thick 100% Solod WPC ( wood polymer composite ) laminated / plain board of required size comprising of virgin PVC resin of K Value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders/ rich husk/wheat husk) and non- toxic additives, made from extrusion process foam sheet single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw withdrawal strength of 2000 N (face) & 1100N (Edge) minimum compressive strength of 50 N/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread of frame of class A category with property of being termite/ Borer free. Water/ moisture proof and fire resistance. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing headed counter sunk ss screws fixed in repairs as in kitchen cabinates complete all as specified and as directed. |
| 72 | Material and labour for PVC Edge band tape of approved brand and colour as specified by Engineer-in- Charge. |
| 73 | Supply and fix Ebco Euro slow motion soft close hinges designed for kitchen cabinets, wardrobes and storage unit suitable for 16 -19 mm cabinet doors complete all as specified and as directed. |
| 74 | Supply and fix Ebco sleek telescopic drawer channel (STD-I), Regular close, 35 Kg Capacity for kitchen cabinets complete all as specified and as directed. |
| 75 | Supply and fix SS 202 stainless steel cabinet handle Polo M-102 Polo, 96 mm for kitchen cabinets, drawers complete all as specified and as directed. |
| 76 | Supply and fix CP wall mixer 3-in-1 system including three joints to steel pipes, plugging and screwing to walls fixed in repairs complete all as specified and as directed.MAKE : JAGUAR Cat No. 7281 or techno commercially equivalent models of makes specified in PS |
| 77 | Supply and fix rotational moulded Polyethylene Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks of any description and Supply and fix 25mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe etc complete all as specified and as directed. |
| 78 | Supply and fix rotational moulded Polyethylene Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks of any descriptions Supply and Fix 25mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe etc complete all as specified and as directed. |
| 79 | Dismantling wrought iron or mild structural steel work of any description and in any position etc complete all as specified and as directed. |
| 80 | Supply and fix rolled mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde E-165 etc complete all as specified and as directed. |
| 81 | Supply and fix in repairs to Steel rolling shutters 1mm lath thickness, with out ball bearing, including top cover, anchoring rod, hasp and staple, safety lever lock and one shop coat of primer; erected in position as indicated, push pull or manual type etc complete all as specified and as directed. |
| 82 | Supply and fix in repairs to Steel rolling shutters 1mm lath thickness, with out ball bearing, including top cover, anchoring rod, hasp and staple, safety lever lock and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle etc complete all as specified and as directed. |
| 83 | Taking down the existing steel gates / rolling shutters of any description and of any size from brackets with connecting rod for servicing/greasing and fixing only suspension shaft of 50mm dia GI pipe heavy grade, helical springs, bearings etc., servicing / greasing for free movement and smooth function of rolling shutter and Refixing unit in original position etc complete all as specified and as directed. |
| 84 | Supply only Ball bearing suitable for rolling shutters etc complete all as specified and as directed. |
| 85 | Supply only helical spring for counter balancing the rolling shutter made out of high tension springs, 115 mm bore and 600mm long complete all as specified and as directed. |
| 86 | Supply and fix in repairs to Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, handles etc., as specified, erected in position and securing runners with holdfasts and brackets etc complete all as specified and as directed. |
| 87 | Taking down collapsible steel gates / shutters consisting of channel, pickers, pivoted flat bars, top and bottom runners for servicing and checking its function including fixing only wheels, top and bottom channels, cleaning and greasing / oiling of wheels and channels etc., complete and fixing in its original position etc complete all as specified and as directed. |
| 88 | Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified and as directed. |
| 89 | Supply and fix for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed. |
| 90 | Supply and fix for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws complete all as specified and as directed. |
| 91 | Excavating post hole in hard / dense soil or by demolishing existing PCC post of size not exc 0.50 cum each and including removing debris outside the MD land etc complete all as specified and as directed. |
| 92 | Material and labour for Plain Cement Concrete, type C-2, (1:3:6) using 40 mm graded stone aggregate as in post holes or in similar works etc complete all as specified and as directed. |
| 93 | Supply and fix rolled mild steel sections as in posts built up of one beam / channel or angle section with flanged plates, caps, bases, slices, angle brackets, cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality-A complete all as specified and as directed. |
| 94 | Supply and fix rolled mild steel as in roof trusses (framed), trussed, purlins, and fastening and heavy brackets framing (beam, tee, angle, channel or flats section) including distance pieces, cleat etc conforming to Fe-410 (Gde-E250) quality -A complete all as specified and as directed. |
| 95 | Supply and fix rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed. |
| 96 | Material and labour for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint of approved tint over one coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 97 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and debris off the premises (outside MD land) etc complete all as specified and as directed. |
| 98 | Material and labour for Plain Cement Concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub base, filling and mass concrete etc complete all as specified and as directed by Engineer-in-Charge. |
| 99 | Material and labour for Plain Cement Concrete type B-1 (1:2:4), using 20 mm graded stone aggregate as in top layers fo hard standing, pavings etc finished even and fair without using extra cement complete all as specified and as directed. |
| 100 | Material and labour for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' etc complete all as specified and as directed. |
| 101 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. |
| 102 | Material and labour for precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) complete all as specified and as directed. |
| 103 | Raking out joints/ pointing to stone walls, random rubble or polygonal rubble uncoursed or brought up to courses, in cement or cement lime mortar etc complete all as specified and as directed. |
| 104 | Material and labour for keyed pointing in CM(1:4) to stone wall surfaces, random rubble masonry, uncoursed or brought upto courses etc complete all as specified and as directed. |
| 105 | Taking down cement plaster on brick / stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and as directed. |
| 106 | Material and labour for 15mm thick ready mix cement plaster on walls with bulk density 1.4 to 1.70 Kg per litre water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufacture instructions including necessary cement screed and preparation of surface to received ready mix plaster up to G+4 building including necessary scaffolding complete all as specified and as directed. |
| 107 | Material and labour for 10mm thick ready mix cement plaster ceiling / chajja with bulk density 1.4 to 1.70 Kg per litre water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufacture instructions including necessary cement screed and preparation of surface to received ready mix plaster up to G+4 building including necessary scaffolding complete all as specified and as directed. |
| 108 | Material and labour for preparation of newly plastered internal wall / ceiling surfaces and applying two coats of distemper oil emulsion over a coat of primer over the coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 109 | Material and labour for preparation of newly treated external wall surfaces and applying two coats of 100% Premium acrylic emulsion paint of approed tint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or treated surfaces etc complete all as specified and as directed. |
| 110 | Material and labour for preparation of existing treatment on internal wall surfaces and applying one coat of distemper oil emulsion of approved titn complete all as specified and as directed. |
| 111 | Material and labour for preparation of existing treatment on ceiling surfaces and applying one coat of distemper oil emulsion of approved tint etc complete all as specified and as directed. |
| 112 | Material and labour for complete removal of existing treatment on internal wall surfaces and applying two coat of distemper oil emulsion of approved tint over a coat of alkali resistant priming paint over a coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 113 | Supply and fix in repairs sheet glass pane 4mm thick selected quality plain glass, in square n exc 0.5 Sqm each pane with rubber beading / glass putty etc complete all as specified and as directed. |
| 114 | Supply and fix in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and as directed. |
| 115 | Supplying and laying in repairs of 20mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete including all fittings complete all as specified and as directed. |
| 116 | Supply and fix in repairs 20 / 25 mm CPVC brass threaded fittings like elbow, tee, socket, reducers, FTA, MTA like fittings fitted to existing line in repairs complete all as specified and as directed. |
| 117 | Supply and fix in repairs Cabinet mirror, moulding thermoset litron formaldehyde of plientil formaldehyde with chromium plated frame openable type and mirror colour white complete all as specified and as directed.MAKE : PRAYAG CAT PART NO 551 (WHITE) / COMMANDER / PARRYWARE |
| 118 | Material and labour for complete removal of existing treatment on external wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or treated surfaces etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 days