Tender For Maintenance / Repairs To Wooden And Steel Furniture At Installation Kalinga, Installation Karna And Nad Bheemunipatnam, Visakhapatanam-Andhra Pradesh

TDR : 56175814

Tender Notice
BOQ

19 Days Left

Visakhapatanam , Andhra Pradesh

Tender Brief : Tender For Maintenance / Repairs To Wooden And Steel Furniture At installation Kalinga, installation Karna And Nad Bheemunipatnam

Document Fees
₹ 500 /-

EMD
₹ 66000.0 /-

Tender Value
₹ 33 Lakhs /-

Submission Date
16-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Wooden Furniture:
2	Dismantling and taking out carefully old unserviceable / worn-out and broken components of wooden and steel furniture without damaging the remaining other serviceable members and supplying and fixing of the same with new components such as Wood Work / Wooden Members made of Teak Wood [Cat – I] wrought finished to required shape and size and applying two or more coats of French Polish to match with the existing surfaces including preparation of surfaces, Prelaminated Particle Board, Exterior Grade, One side Decorative Lamination and other side balancing white, Plywood BWR Grade [6mm thick teak wood beading / edging shall be provided to the exposed edges of Particle Board], Mild Steel Sections, Iron mongery fittings, Builders Hardware, Tapestry Cloth, Foam, Plastic Cane, Cotton Newar etc. and complete to its original shape and size all as shown on drawing, as specified and as directed for following articles:
3	TABLE DINING 8 PERSONS [FD – 273 / FD / E6 / MAP / 03]
4	Long Rail
5	Short Rail
6	Stiffener
7	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
8	BED HARD [FD – 246 / FD – 247]
9	Top made of 12mm thick, BWR Grade, Type \\"AA\\", conforming to IS – 303 and ISI marked Plywood provided in one piece in top.
10	Head Board Leg
11	Foot Board Leg
12	4mm thick Veneered Decorative Plywood BWR Grade for Head Board [on both faces] including 6mm thick Half Round Teak Wood beading
13	4mm thick Veneered Decorative Plywood BWR Grade for Foot Board [on both faces] including 6mm thick Half Round Teak Wood beading
14	BED HARD [FD / E6 / MAP / 08]
15	Top made of 12mm thick Plywood, BWR Grade, Type \\"AA\\", conforming to IS – 303 and ISI marked provided in one piece in top.
16	CHAIR DINING [FD – 279, FD / MAP – II / 04, FD / MAP – II / 05]
17	Rear Leg
18	Front Leg
19	Side Rail
20	Stiffener
21	Cushion with Tapestry Cloth [FD / MAP – II / 04]
22	PVC Seat 4mm thick with Holes Screwed with Rails [FD / MAP – II / 05]
23	Taking out old worn out/damaged existing cane from Chair Dining, cleaning of caning holes without damaging the furniture & re-canning of the same with White or Cream or Ivory colour new cane of 2mm width plastic cane best quality for seat & back, beading with 4mm width plastic cane [Godrej pattern] complete as per drawing and as specified and directed. [FD – 279]
24	CHAIR EASY [FD – 229]
25	Front Leg
26	Rear Leg
27	Arm Rest
28	Taking out old worn out/damaged existing cane from Chair Easy, cleaning of caning holes without damaging the furniture & re – canning of the same with White or Cream or Ivory colour new cane of 2mm width plastic cane best quality for seat & back, beading with 4mm width plastic cane [Godrej pattern] complete as per drawing and as specified and directed.
29	CHAIR WRITING [FD – 202 / FD – 250 / FD – 280]
30	Rear Leg
31	Front Leg
32	Arm Rest
33	Stiffener
34	Taking out old worn out/damaged existing cane from Chair Writing, cleaning of caning holes without damaging the furniture & re-canning of the same with White or Cream or Ivory colour new cane of 2mm width plastic cane best quality for seat & back, beading with 4mm width plastic cane [Godrej Pattern] complete as per drawing and as specified and directed.
35	BIN SOILED LINEN [FD / E6 / MAP / 09]
36	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
37	Drawers including Brass Chromium plated Handles
38	Shutters including Magnetic Catches
39	Bottom including Stiffener
40	TABLE DRESSING LADIES [FD – 251 / FD / E6 / MAP / 14]
41	Mirror size 366 X 1220mm with wooden frame
42	Drawers
43	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
44	Sides made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
45	Back made of 12mm thick Plywood, BWR Grade, Type \\"AA\\", conforming to IS – 303 and ISI marked provided in one piece in top and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
46	Cushion Seat of Stool Dressing
47	TABLE DRESSING GENTS [FD / E6 / MAP / 16]
48	Mirror size 380x760mm with wooden frame
49	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
50	Bottom made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
51	Side made of 12mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
52	Back side made of 12mm thick Plywood, BWR Grade, Type \\"AA\\", conforming to IS – 303 and ISI marked provided in one piece in top and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
53	Wooden Frame for Mirror
54	5.5mm Thick Glass Shelves
55	HAT STAND WITH MIRROR [FD – 233]
56	Mirror
57	Back side 6mm thick Plywood, BWR Grade, Type \\"AA\\", conforming to IS – 303 and ISI marked provided in one piece in top and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
58	4mm thick Veneered Decorative Plywood, BWR Grade on Faces
59	Brass Hook
60	CHAIR SCHOOL WITH HAND BOARD [FD / E6 / MAP / 05]
61	Hand Board made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
62	One Piece PVC Back & Seat
63	Two Coats of Black Colour Synthetic Enamel Paint over a coat of Red Oxide Primer including preparation to all steel surfaces
64	BOARD NOTICE 2440 X 1220mm [FD – 99]
65	Green Baize Cloth fixed to Soft Board
66	Wooden Frame of Shutter
67	Glazing with 4mm thick Sheet Glass Ordinary Quality
68	Back Made of 12mm thick Plywood, BWR Grade, Type \\"AA\\", conforming to IS – 303 and ISI marked provided in one piece in top and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
69	12mm thick Soft Board
70	BOOK CASE OPEN SMALL [FD – 355]
71	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
72	Side Rail / Centre Partition Large
73	Top Shelf
74	Bottom Self
75	Centre Partition Small
76	TABLE DINING 6 PERSONS [FD – 273 / FD / E6 / MAP / 03]
77	Long Rail
78	Short Rail
79	Bracket Made of MS Flat 30 X 6mm of Size 60 X 60mm made to shape fixed with screw in position
80	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
81	TABLE DINING 4 PERSONS [FD – 273 / FD / E6 / MAP / 03]
82	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
83	CHAIR REVOLVING EXECUTIVE [TP]
84	Adjustable Hydraulic System
85	Base Frame
86	Twin Coaster Wheel
87	Handle
88	TABLE CENTRE [FD – 274 / FD – 235]
89	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
90	Long Rail
91	Short Rail
92	TEAPOY [FD – 278 / FD – 382]
93	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
94	Long Rail
95	Short Rail
96	Stiffener
97	TABLE WITH DRAWER 900 X 600 X 760mm [FD – 283]
98	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
99	Long Rail
100	Short Rail
101	Centre Stiffener
102	Side Stiffener
103	PEG TABLE [FD – 384]
104	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
105	Long Rail
106	Short Rail
107	CHARPOY GI PIPE WITH PLYWOOD TOP [FD – 220]
108	Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed.
109	Removing unserviceable / broken MS Stiffener from the GI Charpoy, S & F new Stiffener made of MS Angle Iron 25 X 25 X 5mm thick, 850 mm long welded to Long Rails and painting with two coats of Synthetic Enamel Paint [Black Colour] over a coat of Red Oxide Primer complete all as shown on drawings and as directed.
110	Removing unserviceable Long Rail, S & F new Long Rail made of 32 mm bore GI Pipe, Medium Grade of 1.88 m long threaded at both ends and fixing to the existing 3 way 32 mm dia complete all as shown on drawings and as directed.
111	Cutting and threading both ends and Conversion of 32 mm dia Long Rail obtained from Serial Item No. 1 above into one number Short Rail as directed and fixing to the existing 3 way 32 mm dia elbow including removal of unserviceable Short Rail complete all as shown on drawings and as directed.
112	Cutting and threading at both ends and Conversion of 32 mm dia cut pieces of Long Rail obtained from Serial Item No. 1 above into one number Leg as directed and fixing to the existing 3 way 32 mm dia elbow and providing 40 mm dia, 3 mm thick MS Washer at bottom by welding and painting with two coats of Synthetic Enamel Paint [Black Colour] over a coat of Red Oxide Primer including removal of unserviceable Leg complete all as shown on drawings and as directed.
113	Cutting and threading both ends and Conversion of 32 mm dia Short rail obtained from Serial Item No. 1 above into Two numbers of Legs as directed and fixing to the existing 3 way 32 mm dia elbow and providing 40 mm dia, 3 mm thick MS Washer at bottom by welding and painting with two coats of Synthetic Enamel Paint [Black Colour] over a coat of Red Oxide Primer including removal of unserviceable Leg complete all as shown on drawings and as directed.
114	Removing unserviceable Three Way Elbow, S & F new Three Way, Medium Grade, GI Elbow, 32 mm Bore to Short Rail, Long Rail & Leg complete all as shown on drawings and as directed.
115	Removing unserviceable Check Nut, S & F new Check Nut, suitable for 32 mm bore pipes complete all as shown on drawings and as directed.
116	SOFA SET 4 / 5 PERSON WITH CUSHION [FD – 281]
117	Removing the existing unserviceable cushions along with tapestry cloth and S & F new synthetic foam cushions of size 22\\" X 21\\" X 100mm thick of 40 Density for sofa set 4/5 Seater duly stitched with new tapestry cloth of cost not less than ₹. 500.00 per meter of approved shade and texture by providing zip on one end complete all as specified and directed.
118	Removing the existing faded off / damaged tapestry cloth and providing tapestry cloth of cost not less than ₹. 500.00 per meter of approved quality and shade for detachable cushions of sofa set 5/4 Seater including stitching complete all as required, specified and directed.
119	Front Leg
120	Rear Leg
121	Side Rail
122	Front / Rear Rail for Three Seater
123	Front / Rear Rail for Single Seater
124	Wooden Bearers
125	Support Rail for Back Frame for Three Seater
126	Support Rail for Back Frame for Single Seater
127	Hand Rest
128	Side Rail of Back Frame
129	Battens for Three Seater
130	S & F in repairs, Cushion with Cover of Chair Computer Revolving / tilting with Arms complete all as specified and as directed. [MAP / 03
131	Removing old faded out polish by polish removing agent / scrapper or by caustic soda or by any other means without damaging surfaces, filling holes, knots with putty and finally rubbing with sand paper / abrasive cloth thoroughly for smooth and clean surface free from dust of furniture as listed below and applying high gloss French Polish till glossy shine finish obtained complete all as shown on drawing and as specified and as directed. Note: The hidden unexposed surfaces shall be made smooth by sand papering and a coat of Pink / Wood Primer shall be applied as preservation coat.
132	Chair Dining [FD – 228 / FD – 279]
133	Chair Easy [FD – 17 / FD – 229]
134	Chair Writing [FD – 250 / FD – 280]
135	Table Dining 8 Persons [FD – 273]
136	Table Dressing Ladies with Mirror [FD – 251]
137	Table Dining 4 Persons [FD – 273]
138	Table Dining 6 Persons [FD – 273]
139	Table Dressing Gents with Mirror [FD – 230 / FD – 379]
140	Table Centre [FD – 235 / FD – 274]
141	Peg Table [FD – 236 / FD – 277]
142	Board Notice 2440 X 1220 mm [FD – 99]
143	Bed Hard [FD – 246]
144	Side Board [FD – 241 / FD – 372]
145	Teapoy Wooden [FD – 278]
146	Table with Drawer 900 X 600 mm [FD – 283]
147	Table without Drawer 900 X 600 mm [FD – 284]
148	Double Bed [Wooden] of Size 1500 X 1950 X 450mm [TP]
149	Chair Dining [FD / MAP – II / 04, FD / MAP – II / 05]
150	Sofa Single Seater [FD – 281 / FD – 373]
151	Sofa Set 4 Seater [FD – 281 / FD – 373]
152	Sofa Set 5 Seater [FD – 281 / FD – 373]
153	First Class Hard Wood Rifle Box [4'6\\" X 2' X 2'6\\"]
154	Hat Stand With Mirror [FD – 233]
155	Dry cleaning of Sofa Single Seater Cushions with Cover through approved Dry Cleaning Agents complete all as specified and as directed.
156	Steel Furniture:
157	Material & labour for Removing existing paint of any description both inside & outside by paint removing agent / scrapper or by caustic soda or by any other means without damaging surfaces, filling holes, welded joints with putty and finally rubbing with sand paper / abrasive cloth thoroughly for smooth and clean surface free from dust and applying two coats of synthetic enamel paint of smoke grey colour by Spray Machine complete all as shown on drawings and as directed.
158	Almirah Large Steel with Shelves [FD – 67 / FD – 339 / FD – 1031]
159	Almirah Small Steel with Shelves [FD – 67 / FD – 340 / FD – 1032]
160	Almirah Steel Large [FD / E6 / MAP / 18]
161	Book Case Steel [FD – 1028]
162	Chair CB Office with Arms [FD – 75]
163	Chair Writing [FD / E6 / MAP / 12]
164	Locker Steel Built-in [FD – 1029]
165	Locker Steel [CWE [P] / V / SK / 18 & CWE [P] / V / SK / 35]
166	Rack Steel for Closed Records 915X760X1905mm [TP]
167	Stool Steel [FD – 81 / FD – 409]
168	Rack Steel Adjustable Six Tiers [FD – 106]
169	Rack Pigeon Hole Steel [FD – 106]
170	Side Rack with Trays [Steel] [FD – 97]
171	Rack Steel Adjustable Three Tiers [FD – 106]
172	Rack Shoe Steel [ FD / E6 / MAP / 02 [R]]
173	Steel Shelving Cabinet Large [Adjustable Type] [TP]
174	Steel Shelving Cabinet Small [Adjustable Type] [TP]
175	Table Office Officers Steel [FD – 84 / FD – 306]
176	Table Office Clerk / General Steel [FD – 84 / FD – 307]
177	Table Typist Steel [FD – 84]
178	Table with Drawer Steel [FD – 1008]
179	Table Steel [FD – 1009]
180	Table Officers Steel [FD – 1003]
181	Table Clerk Steel [FD – 1004]
182	Chair Verandah [FD / MAP-II / 06]
183	Locker [6 Units] Steel [FD – 127]
184	Book Shelf Open Large Steel [FD – 69]
185	Chair Visitors [Model No. PCH – 7112R of Godrej] [TP]
186	Slotted Angle Rack 4 Tier [TP]
187	Storage Cabinet [Model No. Nova Pedestal of Godrej] [TP]
188	Work Station 1500 X 1500 X 1241mm [Make: Godrej Spacio] [TP]
189	Storage Cabinet [Model No. VSDU – 12 of Make Godrej] [TP]
190	ALMIRAH LARGE STEEL [FD – 67 / FD – 339 / FD – 1031]
191	Locking Device, Brass, Chromium Plated 6 Lever with Duplicate Keys, First quality
192	Handles
193	Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
194	Removing the existing unserviceable / damaged Back and supplying and fixing New Back made of 1.00mm thick CRCA sheet including welding and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
195	Removing the existing unserviceable / rusted Shelves and supplying and fixing New Shelves made out of 1.00 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
196	ALMIRAH MEDIUM / SMALL STEEL [FD – 67 / FD – 340 / FD – 1032]
197	Locking Device, Brass, Chromium Plated 6 Lever with Duplicate Keys, First quality
198	Handles
199	Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
200	Removing the existing unserviceable / damaged Back and supplying and fixing New Back made of 1.00mm thick CRCA sheet including welding and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
201	Removing the existing unserviceable / rusted Shelves and supplying and fixing New Shelves made out of 1.00 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
202	LOCKER STEEL BUILT-IN [FD – 1029]
203	Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
204	CHAIR CB OFFICE WITH OR WITHOUT ARMS [FD –75]
205	M & L for Removing Dents / Bends by Cutting and Welding of broken Chair CB Office with Arms and bringing to its original shape, painting to Chair Tubular Steel with Arms including fixing 4 Nos of new PVC Bushes to the bottom of the chair frame and 2 Nos of PVC Caps on the top of the frame complete all as specified and as shown on drawing.
206	All as per Serial Item No. 6.01 above but for Chair CB Office without Arms
207	Removing unserviceable Seat Frame of Chair CB Office with Arms and S & F new Seat Frame made out of teak wood, black polished and duly plastic canned in \\"Godrej\\" pattern with plastic cane not less than 1.8mm width and borders with 4mm wide plastic cane fixed with 4 Nos screws and nuts to the chair frame complete all as specified and as shown on drawing.
208	All as per Serial Item No. 6.03 above but Back Frame of Chair CB Office with Arms
209	Removing broken Hand Rest and S & F new Hand Rest made of teak wood, black polished and fixed to the Chair CB Office with Arms with screws of suitable size to the chair frame complete all as specified and as shown on drawing.
210	All as per Serial Item No. 6.03 above but Seat Frame of Chair CB Office without Arms
211	All as per Serial Item No. 6.03 above but Back Frame for Chair CB Office without Arms
212	Removing of existing torn out / unserviceable plastic cane from Back of Chair CB Office with Arms and recanning with plastic cane in \\"Godrej\\" pattern with plastic cane not less than 1.8mm width and borders with 4mm wide plastic cane complete all as specified and as shown on drawing.
213	All as per Serial Item No. 30.08 above but Seat Frame of Chair CB Office with Arms
214	CHAIR VERANDAH [FD – 256 / FD – 359]
215	Removing of existing torn out / unserviceable plastic cane from Chair Verandah, preparation of steel tubular frame surfaces with emery paper for painting and applying two coats of synthetic enamel paint over one coat of red oxide primer and recanning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour Complete all as specified and shown on drawing.
216	CHAIR VERANDAH [FD / MAP-II / 06]
217	Removing the existing worn-out Plastic Seat and Back from Chair Verandah and S & F new Plastic Seat & Back of approved quality including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
218	CAFETERIA CHAIR [TP]
219	Removing the existing worn-out Plastic Seat and Back from Cafeteria Chair and S & F new Plastic Seat & Back of approved quality and size including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
220	TEAPOY VERANDAH [FD / E6 / MAP / 17]
221	M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
222	Removing unserviceable Top from Teapoy Verandah and S & F New Top complete all as shown on drawing and as directed.
223	TABLE OFFICE CLERK / GENERAL STEEL [FD – 84]
224	Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
225	Removing the unserviceable / broken Drawer S & F New Drawer made of 1mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
226	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
227	M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
228	TABLE OFFICE OFFICER STEEL [FD – 84]
229	Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
230	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
231	M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
232	TABLE TYPIST STEEL [FD – 84]
233	Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
234	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
235	M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
236	Table Computer [FD / E6 / MAP / 03]:M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
237	TABLE BED SIDE [FD / E6 / MAP / 15 [R]]
238	Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
239	Right Side made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
240	Left Side made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
241	Front Door and fixing the knobs from Table Bed side and replacing the same items confirming to same quality and size complete.
242	Back Made of 6mm thick Plywood, BWR Grade, Type \\"AA\\", conforming to IS – 303 and ISI marked provided in one piece in top.
243	STEEL SHELVING CABINET ADJUSTABLE TYPE [TP]
244	Removing the existing unserviceable / rusted Shelves of Steel Shelving Cabinet Large Adjustable Type and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
245	Removing the existing unserviceable / rusted Shelves of Steel Shelving Cabinet Small Adjustable Type and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
246	RACK STEEL ADJUSTABLE SIX / THREE TIER [FD – 106 / FD – 1038 / FD – 1039]
247	Removing the existing unserviceable / rusted Shelves of Rack Steel Adjustable Six Tier and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces
248	All as per Serial Item No. 41.01 but Rack Steel Adjustable Three Tier complete all as specified and as directed.
249	All as per Serial Item No. 41.01 but Rack Steel Adjustable Closed Type of Size 1875 X 900 X 500 mm [TP] complete all as specified and as directed.
250	CHARPOY IP HARD TOP [FD / MAP-II / 01]
251	Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed.
252	CHARPOY GI PIPE WITH PLYWOOD TOP [FD – 220]
253	Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed.
254	Removing the old unserviceable Nylon newar from GI Charpoy, cleaning the surfaces thoroughly, Supplying and closely weaving both sides with new Nylon Newar First Quality of Light Shade of size 50/55 mm wide of approved quality consisting minimum 33 Bands and 13 Rows, not less than 1.50 KGs per Charpoy including minor repairs complete all as shown on drawings and as directed. Make: Konark / Mayur / Kohinoor [Recycled Nylon Newar shall not be used]
255	S & F MS Stiffners made of 25 X 4mm Flat Irin or 25mm Square Tube, 16 Guage, welded to 32mm Dia GI Pipe Charpoy and fixed to Ply Wood top with suitable Nut and Bolts and duly painted with two coats of Synthetic Enamel Paint [Black Colour] over a Coat of Red Oxide Primer complete all as shown on drawings and as directed.
256	Taking down existing unserviceable GI Pipe Long Rail of 32 mm Bore from GI Pipe Charpoy and Supplying & Fixing new Long Rail using 32 mm Bore GI Pipe, Medium Grade, approved quality, of length as per existing Long Rail with proper threading complete all as shown on drawing and as directed.
257	Taking down the existing Short Rails and making the existing GI Pipe Long Rails 32 mm bore obtained from Item No. 22.04 above into short rail by cutting, threading suitably and fixing with existing old elbow complete all as shown on drawing and as directed.
258	Making the existing unserviceable GI Pipe Short Rail 32 mm Bore of Charpoy obtained from Item No. 22.05 above and converting into Legs by cutting, threading suitably and fixing with existing elbow including providing 3 mm thick MS Base Plate equal to outer dia of the pipe, welded at the bottom of the Leg and two Nos Clamps made out of 3 mm thick MS Black Sheet welded to each Legs for holding mosquito net frame set frame all as shown in drawing including one coat of black enamel paint to mosquito net frame complete all as shown on drawing and as directed.
259	Taking out existing unserviceable GI Pipe Three Way Elbow from GI Pipe Charpoy and Supplying & Fixing New GI Elbow, 32 mm Bore, Three Way, Medium Grade, approved quality complete all as shown on drawing and as directed.
260	Taking out existing unserviceable GI Check Nut from GI Charpoy and Supplying & Fixing New 32 mm GI Check Nut complete all as shown on drawing and as directed.
261	CHAIR EXECUTIVE TYPE REVOLVING [HFD – 2047]
262	M & L for carrying out repairs including replacement of Wheels and Cushion with Cover including replacement of necessary steel sections and spares of Main Frame to bring it to original shape and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
263	CHAIR VERANDAH [FD / E6 / MAP / 11]
264	Removing the existing worn-out Steel Plates of Seat and Back from Chair Verandah and S & F new Steel Plates of Seat and Back of approved quality including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.
265	RACK SHOE STEEL [FD / E6 / MAP / 02 [R]]:M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including replacement of necessary steel sections and spares and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Andhra Pradesh Tenders

Furniture Tenders

Furniture Items Tenders

Steel Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Maintenance / Repairs To Wooden And Steel Furniture At Installation Kalinga, Installation Karna And Nad Bheemunipatnam, Visakhapatanam-Andhra Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Maintenance / Repairs To Wooden And Steel Furniture At Installation Kalinga, Installation Karna And Nad Bheemunipatnam, Visakhapatanam-Andhra Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us