|
| 1 | Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 2 | M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. |
| 3 | All as described in Serial Item No. 2 herein before but except Bricks.Note: Bricks obtained from demolition shall be re-used under this item |
| 4 | M & L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 5 | All as described in Serial Item No. 4 herein before but except Stones.Note: Stones obtained from demolition shall be re-used under this item |
| 6 | M & L for PCC 1:3:6, Type C-1, using 20 mm graded stone aggregate as in Coping, kerbs,hold fast cill,filling in pressed steel door frames and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed. |
| 7 | S & F in repairs Galvanised, 2 Strand, Steel Barbed Wire 2.24mm dia, Barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc including dismantling of old existing barbed wire fencing of any size complete all as specified and directed.Note: Each line of wire will be measured for payment. |
| 8 | S & F in repairs Concertina Coil Fencing with Razor punched barb tape Concertina Coil made from High Tensile Spring Steel, High Carbon Wire conforming to IS – 4454 [Part – 1], of Grade –SM duly Hot Dipped Galvanised, 600mm dia, 10 Metre openable length, with Galvanised coating and Punched Tape material as per IS – 513, having 50 Nos Rounds per 6 Metre length [before stretching], having medium barbs [Barb length 24±1mm, Pitch between two barbs 35±1mm], Spring Core Wire [2.5 mm thick] of high tensile strength of 165 Kg / Sq.mm with tape [0.52mm thick] and weight 43.478 Grams / Metre and fixing to “Y” or Trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6/9 horizontal RBT [Reinforced Barbed Tape] Wire, Stud tied with GI Staples and GI Clips to retain horizontal, including necessary bolts and coating with Px2 Compound [Anti Rust] including dismantling of old existing concertina coil complete all as specified and as directed. Note: Horizontal barbed wire & angle iron supports shall be measured and paid separately under relevant items of Schedule \\"A\\". Measurement shall be made for stretched length. |
| 9 | Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed. |
| 10 | S & F in repairs Rolled Mild Steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed. |
| 11 | S & F Mild Steel work confirming to Fe - 290, Grade E-165, as in framed work such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed. |
| 12 | S & F in repairs Mild Steel work conforming to Fe - 290, Grade E-165 as in supporting brackets for concertina coils/ fencing mesh, Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embedding in concrete and screwing etc., Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bending to shape, notching for wire, drilling holes or as in flat iron fillets [for securing wire mesh and barbed wire etc.] including all necessary drilling, bolting or riveting, etc. and similar work complete all as specified and directed. |
| 13 | S & F in repairs MS machine made screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square nut exceeding 10 cm long and not exceeding 15 cm long, dia of neck exceeding 11 mm but not exceeding 15 mm complete all as specified and as directed. |
| 14 | M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 15 | M & L for one coat of Synthetic Enamel paint on old painted steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 16 | M & L for forming fair finished drain or channel of 30cm inner girth using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed. |
| 17 | M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. |
| 18 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises, all as specified and as directed |
| 19 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 20 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M & L for One coat of Cement Based paint by using auto roller/ airless sprayer on old painted Walls/ ceilings, pillasters, bands, borders, soffits of chajjas and projections including necessary preparation of surfaces by using vaccume based sanding machine complete all as specified and as directed.Note:- The contractor shall carryout Cement Babsed Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Cement Based Painting through their authorised applicators before commencement of the work to GE for approval. |
| 22 | M & L for preparation of old surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surface complete all as specified and as directed. |
| 23 | M & L for complete removal of existing treatment, preparation of surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as directed |
| 24 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the premises complete all as specified and as directed. |
| 25 | M & L for providing Precast Cement Concrete, 1:1.5:3, Type A1, using 20mm graded stone aggregate as in landing, Cover slabs for drains and similar article with plain faces and setting in Cement Mortar 1:4 complete with joints to match complete all as specified and as directed.Note:- Reinforcement shall be measured and paid separately. |
| 26 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 27 | Dismantling of stone slabs and tiles in flooring, apron etc of any description or thickness laid dry and pointed in any mortar complete all as specified and directed. |
| 28 | M & L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20mm thick screed bed or bedding layer in Cement Mortar 1:6 complete all as specified and directed. [Notes: [a] Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. [b] The edges of treads shall be bull nosed / half rounded.[c] The edges of the treads and landings shall also be provided with three numbers of grooves. |
| 29 | Supply only Chain link MS galvanised fencing, any size or type, complete all as specified and as directed. |
| 30 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire including taking down existing unserviceable fencing wire mesh of any description and size complete all as specified and as directed.Note: Supply only chain link fencing shall be measured & paid separately |
| 31 | Dismantling of post struts (wood, steel or RCC) any section embaded in natural ground including taking out embeded portion complete all as specified and as directed. |
| 32 | Excavation in post holes ( or similar holes) each not exceeding 0.5 Cu.m, getting out in Hard / Dense soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 33 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the primises complete all as specified and as directed. |
| 34 | M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified. |
| 35 | M & L for 100 mm thick, PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Sub base for flooring complete all as specified and as directed. |
| 36 | M & L for 100 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in flooring, sub base and base layer etc complete all as specified and as directed. |
| 37 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris off the premises complete all as specified and as directed. |
| 38 | M & L for Chequered Cement Concrete Tiles of size 250 X 250 mm / 300 X 300 mm, 22mm thick, Hydraulically pressed as in Floors, set jointed and pointed in neat cement slurry to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 of cement complete all as specified and as directed. |
| 39 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 40 | M & L for Inter Locking Paving Blocks of 80mm thick, made with M-40 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern, shape and size conforming to IS - 15658 set in floors including taking down existing paver blocks of any description and size complete all as specified and directed. |
| 41 | M & L for Inter Locking Paving Blocks of 60mm thick, made with M-35 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern, shape and size conforming to IS - 15658 set in floors including taking down existing paver blocks of any description and size complete all as specified and directed. |
| 42 | Dismantling of depressed precast concrete interlocking paver block of any shape and size and refixing same after making good with PCC/hard core complete all as specified and directed. Note:- PCC/Hardcore shall be paid separately in relevant item. |
| 43 | M & L for Providing Factory made Precast Cement Concrete Solid Block Masonry of 1:3:6, Type C1 using 20mm graded stone aggregate exceeding 100mm width with plain or interlocking joints set in cement mortar 1:4 complete all as specified and as directed. |
| 44 | Cleaning of existing sewage pipe lines and removing the blockages by rodding using split bamboo or by mechanical means or by any other means, between the manholes, Nahani traps to gully traps, gully traps to manholes including vertical stack pipes (where ordered) and taking out all debris, sludge or any solid/ foreign materials from sewage line and flushing with water and testing after cleaning for free flow of sewage complete including removing the debris to a distance outside MD land and depositing where directed complete all as specified and as directed.Note: The rate quoted shall be deemed to include taking out existing cover slabs of manholes of any description and size without damaging the slab to facilitate cleaning of pipes and replacing back in original position. |
| 45 | Removal of demolished material to a distance not exceeding 50M and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 46 | M & L for uprooting of tree of girth upto 5 cm to 20 cm from walls of bldg up to extranded root and spraying of acid of required quantity complete from any location of bldg up to four storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate including necessary scafolding complete all as specified and as directed. |
| 47 | M & L for uprooting of tree of girth upto 20 cm to 30 cm from walls of bldg up to extranded root and spraying of acid of required quantity complete from any location of bldg up to four storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate including necessary scafolding complete all as specified and as directed. |
| 48 | Clearing of roof/chhajja and removing all vegetation area of roof not exceeding 500Sqm each complete all as specified and as directed. Please Enable Macros to View BoQ information |
