Tender For Comprehensive Repair To B/R And E/M Works In Living In Billets At Af Stn Ad Ur
Tender Value
47.98 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
8 days left
EMD
95960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair To B/R And E/M Works In Living In Billets At Af Stn Ad Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Jul-2026 | BOQ | BOQ | 16-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B/R Works |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sq. metre, etc completed all as specified and directed. |
| 4 | M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed over 15 mm thick screed cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 5 | M&L for glazed ceramic, straight cut/joint free,7 to 8 mm thick colored tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces such as dado etc over & including 10mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete all as specified and directed. |
| 6 | Taking down cement plaster of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 7 | M & L for rendering 5 mm thick on brick or concrete surface of ceiling finished even and smooth in CM 1:3 complete all as specified and directed. |
| 8 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces etc complete all as specified and directed. |
| 9 | M&L for 15 mm thick rendering in cement mortar (1:4) mixed with water proofing compound on fair faces of brickwork or concrete surfaces etc complete all as specified and directed.Note:- WPC shall be measured and paid seperately |
| 10 | Supply only water proofing compound, ISI marked, complete all as specified and directed. |
| 11 | M&L for repairing of damaged swollen RCC surface like Projection Chajja, facia, parapet etc including necessary scraping , cutting, derusting and cleaning exposed reinforcement , washing apply cement slurry @ 3 kg/Sqm and finishing the surface with cement concrete (1;1.5:3) using 12.5 mm graded stone agg including provn of welded mesh having weight not more than 3 Kg/Sqm as reinforcement with and/or finished the repaired surface with cement and sand mortar (1:3) using WPC and work in Patches area n. exc 5 Sqm including necessary formwork complete all as specified and directed. |
| 12 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash ,complete all as specified and directed. |
| 13 | M&L for Preparation of new plastered wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty 1mm thick, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer. |
| 14 | M&L for Preparation of new plastered wall surfaces and applying two coats of exterior acrylic paint over and including a coat of primer, complete all as specified and directed. |
| 15 | M&L for Complete removal of existing treatment of any description, including preparation of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty 1mm thick, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer. |
| 16 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash ,complete all as specified and directed. |
| 17 | M&L for Complete removal of existing treatment of any description, including preparation of wall surfaces of any description complete all as specified and applying the following: - a) Applying wall care putty 1 mm thick, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed).complete all as specified. (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer in disruptive/camouflaging pattern of six/four shades complete all as specified and directed. |
| 18 | M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and directed. |
| 19 | M&L for Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed. |
| 20 | M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 21 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 22 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 23 | M & L for Machine cut kota stone slab flooring 20-25mm thick laid over cement screed base 15 mm thick (CM 1: 4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 24 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over screed base 10 mm thick (CM 1: 4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 25 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 26 | M & L for 75 mm thick Plain Cement Concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), finished even and smooth as in plinth protection and joints shall be sealed with joint sealant compound grade A, complete all as specified and directed. |
| 27 | M & L for 25 mm thick Plain Cement Concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate), finished even and smooth as in Floor complete all as specified and directed. |
| 28 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 29 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 30 | Taking down Chowkhats or frames not exc 1.5 Sqm each (without taking off shutters from the frames)complete all as specified and as directed. |
| 31 | Re-securing or easing and adjusting and also refixing builders hardware as required and renewal of screws etc of shutters of any description of exceeding 1.0 Sqm but not exc 2.0 Sqm each without taking down complete all as specified and as directed. |
| 32 | Taking down shutters exc 1.0 sq. m but n exc 2.0 sq. m each complete all as specified and directed. |
| 33 | S&F Pressed steel frames of size 125 mm X 60mm made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size butt hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 34 | S&F factory made steel windows with side hung shutter with glazing bars (using profile section as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable), each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, complete all as specified and directed. |
| 35 | S&F factory made steel windows with side hung shutter without glazing bars (using profile section as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable), each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, complete all as specified and directed. |
| 36 | S & F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and directed. |
| 37 | S & F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 35 mm , complete all as specified and directed. |
| 38 | S&F anodised aluminium frame for Partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing with dash fasteners of required dia and size ,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc complete all as specified and directed. |
| 39 | M&L for 12mm Pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination , fixed with screws to Aluminium frame work including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 40 | M & L for 0.9 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, etc completed all as specified and directed. |
| 41 | M & L for 18 mm thick, No of ply 12, plywood, grade BWP, type BB with one side decorative laminate fixed with screws to timber/Steel frame work , etc completed all as specified and directed. |
| 42 | Supply & fixing forb 20mm wide & 0.5 to 0.80 mm thick PVC EDGE BENDING of PVC pasted on edges with suitable adhesive , complete all as specified and directed. |
| 43 | S&F 20 inch Steel fold Down bracket for wall Mounted tables/shelf fixed with screws with 100kg load capacity, completed all as specified and directed. |
| 44 | M&L for Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.mm in each pane complete all as specified and directed. |
| 45 | S&F in repair Mild steel PVC powder coated (coloured) curtain rod with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as complete all as specified and directed. |
| 46 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 47 | S & F 300 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed. |
| 48 | S & F in repair floor door stopper of aluminium alloy body double leg 75-80 mm long with rubber stopper at bottom complete all as specified and as directed. |
| 49 | S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed. |
| 50 | S&F mild steel Butt hinges(100 mm long) medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 51 | S&F 125 mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified. |
| 52 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement ,including taking down old railing and make good the surfaces as required complete all as specified and directed. |
| 53 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 54 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 55 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 56 | E/M Works |
| 57 | Taking down copper/aluminium point wiring (light, fan , socket or power) complete including fixtures and fittings such as switches, ceiling rose, pendant ,regulators,sockets,light fittings etc.removing materials to store for keeping in safe custody or for taking credit (credit for items shall be made as per conditions separatly) and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 58 | M&L for pointing wiring with 1.5 sqmm (nominal area) PVC insulated FRLS H, unsheathed, multistrand, 1100 volts grade copper conductor cable single core drawn through in and including non metallic concealed PVC conduit medium grade of suitable dia as per SSR specification and its accessories including one run of 1.5 sqmm PVC insulated copper conductor cable green in colour for continuous earthing including MS terminal box flushed to wall with 3mm thick laminated hylem sheet top cover for fixing of switch/socket etc all as specified. Note:- surface conduit shall be laid in ceiling portion only. |
| 59 | One light/ceiling fan/exhaust fan /call bell point controlled by one switch. |
| 60 | One 3 pin 5 amps socket point on independent board |
| 61 | S&F, Switch piano flush button single pole one way, 6 Amp complete all as specified. |
| 62 | S&F, Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, flush type, complete all as specified. |
| 63 | S&F, Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified. |
| 64 | M&L for Sub main wiring (with approved colour coding as per IS) with single core FRLS H PVC insulated multi stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLS H PVC insulated multi stranded copper conductor 1.1 KV grade for earthing in conduits including taking down old , complete all as specified for the following: - |
| 65 | 2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable |
| 66 | 2 runs of 10 Sq. mm main cable + 1 run of 10 Sq. mm earth cable |
| 67 | S&F, Sheet metal enclosure for DB for fixing MCB’s, isolators etc., having IP-43 protection, suitable for surface and flush mounting, IN REPLACEMENT, complete all as specified comprising the following: - |
| 68 | SPN, 12 way with 200 Amp rated bus bar, 240 V, double door type. |
| 69 | SPN, 8 way with 200 Amp rated bus bar, 240 V, double door type. |
| 70 | S&F, in replacement MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6 to 32 Amp, complete all as specified and directed. . |
| 71 | S&F, in replacement MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 32 Amp, complete all as specified and directed. |
| 72 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC of aluminium housing and having not less than 90 lumens per watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed. |
| 73 | Taking down carefully ceiling fan, ceiling cable end, dismantling blades and removing fan to MES store Yard and refixing the same as its original position , complete all as directed. |
| 74 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender