Tender For B/R Misc Repairs To E/M Installations At Sma Rameswaram, Dad Complex, P A Vihar I And Ii Under Ge Fort Kochi
Tender Value
9.75 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
7 days left
EMD
19500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for B/R Misc Repairs To E/M Installations At Sma Rameswaram, Dad Complex, P A Vihar I And Ii Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Demolition of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in floors, aprons etc. all as specified and as directed |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed |
| 6 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar, complete all as specified and as directed. |
| 7 | Taking down chowkats with shutters (without taking off shutters from frames) area of opening exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed. |
| 8 | Material and labour for pre-cast cement concrete block 1:3:6 Type C-1 (using 20mm graded aggregate)masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed. |
| 9 | Material and labour for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed) complete set in cement mortar 1:4, complete all as specified and as directed. |
| 10 | Material and labour for rendering 10mm thick in cement mortar 1:6 on other than fair face finished even & smooth without using extra cement compete all as directed. |
| 11 | Material and labour for preparing newly plastered surfaces of wall & applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer over one coat of wall care putty (minimum thickness 1mm) each and complete all as specified and as directed. |
| 12 | Material and labour for 6.3mm or below size aggregate filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 13 | Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and as directed. |
| 14 | Material and labour for reinforced cement concrete Type B1 1:2:4 (20 mm graded stone aggregates ) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 15 | Material and labour for flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed. |
| 16 | Material and labour for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hoping for cover slabs , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality all as specified and as directed. |
| 17 | Supply and fix in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing in the slab and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 18 | Supply and fix in repairs chromium plated bib tap 15mm bore fancy type, screwed down, screwed for iron pipe/ CPVC pipe or for brass ferrule and fixed all as specified and as directed. |
| 19 | Dismantling PVC Kitchen and Bathroom pipes, of 75mm internal dia fixed to wall or laid under floors complete all as specified and as directed. |
| 20 | Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length as per the requirement at site and fixed to walls/ laid in floors complete all as specified and as directed. |
| 21 | Taking up or down 20 mm bore steel water tubing and connections complete all as specified and as directed. |
| 22 | Supply and fixing of CPVC pipes 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary fittings/ joints complete all as specified and as directed. |
| 23 | Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base of floor etc, finished the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 24 | Material and labour for screed bed of 20 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed. |
| 25 | Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments, complete all as specified and as directed. |
| 26 | Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in 1:6 cement mortar, complete all as specified and as directed. |
| 27 | Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirting, dados and risers to steps etc. including backing coat of 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed. |
| 28 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet, complete all as specified and as directed. |
| 29 | Supply and fix PVC insulation panels 10mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. complete all as specified and as directed. |
| 30 | Supply and fixing Anodised aluminium snap grid frame work for false ceiling using T section of size 25mmx25mm,1mm thick in square pattern of grid size 605X605mm.The aluminium framework is supported on wall with aluminium L section of size 25x25mm angle etc. The aluminium section is supported by Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. |
| 31 | Supply and fixing Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors hung as gates, including pintle hinges, stops, hand-made sliding bolts, handles etc. ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 32 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described applying with two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified and as directed. |
| 33 | Material and labour for providing cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in hold fast bed block, filling in pressed steel frame, window cills complete all as specified and as directed. |
| 34 | Supply and fixing 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 35 | Supply and fixing Flush door shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.Note: Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation all as specified and directed. |
| 36 | Material and labour for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 37 | Supply and fixing Stainless steel butt hinges medium weight 100mm size in any position all as specified and as directed. |
| 38 | Supply and fixing 200 mm aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed. |
| 39 | Supply and fixing 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed. |
| 40 | Supply and fixing 150mm aluminium handles, cast type, anodised door all as specified and as directed |
| 41 | Chip and remove all damaged and de bonded concrete and plaster from the RCC column, beam, flights, landing, railing and slabs by manually or mechanically height up to 15m so as to expose the corroded reinforcement bars including the rent of tools, scaffolding complete and labour charges for dumping the debris outside the MOD land all as specified and as directed. |
| 42 | Supply and application of rust remover/converter over the corroded reinforcement bar wherever micro concreting is required and cleaning the same after application including the cost of all materials, rent of tools, scaffolding cost of brush etc complete all as specified and as directed. |
| 43 | Supply and application of Nitozinc Primer or equivalent over the exposed steel reinforcements after removing the rust scales from the exposed reinforcement rods in one square meter area including the cost of all materials rent of tools, scaffolding, cost of paint brush complete all as specified and as directed. |
| 44 | Supply and application of Nitobond EP epoxy bonding agent or equivalent over the old concrete surface including the cost of all materials, rent of tools, scaffolding and cost of painting brushes etc complete all as specified and as directed. |
| 45 | Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars including the charges for cutting, bending, placing and fixing in position using Lok-Fix or equivalent including the cost of all materials rent of all accessories and tools, scaffolding and supporting materials, labour charges including the cost of steel bars complete all as specified and as directed. |
| 46 | Supply and provisioning Renderoc RG or equivalent to an average thickness of 60mm for beam and column, fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work including the cost of all materials, rent for tools, scaffolding, necessary water tight formwork shuttering and labour charges etc. ( make: Renderoc or equivalent as per manufacturer instructions) complete all as specified and as directed. |
| 47 | Material and labour for rendering repair mortar (using universal polymerised repair mortars) in layers of 15mm over tacky bond coat and subsequently built up the required thickness (up to 45mm) in subsequent layers of 15mm and finishing the final layer even on concrete surfaces finished even all as specified and as directed as per manufacturers instruction and as directed. Make: M/s Pidilite Industries Ltd or Equivalent in Asian paints/STP Ltd/Fosroc. Note: Application to be done by authorised applicators only. Rate of shuttering, scaffolding and formwork is included. Rate of bond coat to be paid separately. |
| 48 | Providing, cement concrete Type B0 1:2:4 (using 12.5mm graded stone aggregates)in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 49 | Material and labour for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surface such as skirting, dados, risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed. |
| 50 | Material and labour for 16mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, and like in cement mortar (1:4) including pointing white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, set and jointed in neat cement slurry over 20mm thick screed bed in cement mortar 1:4 and pointed in white or coloured cement to match the shade complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender