|
| 1 | S & F Factory made ready to install Non-Toxic, Lead & Cadmium free, single extruded, Water proof, termite proof, fire retardant, excellent screw holding capacity, Solid PVC Boards, 18mm thick, One Side Decorative Choice Lamination and other side Balancing White as in Cupboard Shutters with stainless steel fancy type handle, 100mm long fixed to Door Frame with and including stainless steel screws complete all as specified as directed. |
| 2 | S & F Factory made ready to install Non-Toxic, Lead & Cadmium free, single extruded, Water proof, termite proof, fire retardant, excellent screw holding capacity, Solid PVC Boards, 18mm thick of White Colour as in Cupboard Shelves fixed to Guide Rails with stainless steel screws complete all as specified as directed. |
| 3 | S & F stainless steel sliding/telescopic channel of length 20 inch (500mm) with 3 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45mm including necessary fixing arrangement complete all as specified and directed. |
| 4 | S & F cold rolled nickel plated steel O crank soft closing concealed hinge (15-22mm) including necessary fixing arrangement to shutter complete all as specified and directed. |
| 5 | S & F Magnetic Catches with Striking Plate, First quality suitable for Cupboard shutters complete all as specified and as directed. |
| 6 | S & F in repairs stainless steel basket of size 475mmx500mmx100mm with external width 475mm as in cutlery, cup and saucer basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement complete all as specified and directed. |
| 7 | S & F in repairs stainless steel basket of size 475mmx500mmx200mm with external width 475mm as in thali, plain wire basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement complete all as specified and directed. |
| 8 | S & F in repairs stainless steel fancy type handle, 100mm long complete all as specified and as directed by Engineer-in-Charge. |
| 9 | M&L Providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.[Note: Reinforcement shall be measured and paid separately under relevant item of this BOQ] |
| 10 | S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed. |
| 11 | S&F high strength deformed TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed. |
| 12 | M&L for rendering 15mm thick in CM (1:6) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 13 | M&L for preparation newly plastered internal surfaces of walls, applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface and applying two coats of interior acrylic emulsion over a coat of interior primer complete all as specified. |
| 14 | M&L for Granite (of any type) tiles 20mm thick machine cut, laid over 20mm thick screed bed in CM (1:4) and jointed with cement slurry and pointing grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including complete all as specified and as directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 16 | M&L Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.06sqm but n exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B-0 using 12.5mm graded crushed stone aggregate,complete all as specified and directed |
| 17 | M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified. |
| 18 | S&F in repairs Wall mounted regular sink tap with swinging spout in chromium finish, 15mm bore, cast copper alloy, chromium plated with crutch handle,with wall flange, screwed down, screwed for iron pipe or for brass ferrule complete all as directed by Engineer-in-Charge |
| 19 | S&F Cast iron floor trap, with including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with dia of outlet 100mm complete all as specified. |
| 20 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed by Engineer-in-Charge |
| 21 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm by complete all as directed by Engineer-in-Charge |
| 22 | S&F in repairs stainless steel kitchen plate rack of size 31\\"x36\\"x10\\", made of 1mm thick stainless steel sheet complete all as directed by Engineer-in-Charge |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for etc. |
| 24 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Hold fasts similar work con- forming to Fe.290.Gde-E-165 |
| 25 | M/L Preparing new steel surfaces and appling two coats of synthetic enamel paint over a coat of red oxide primer Please Enable Macros to View BoQ information |
