|
| 1 | M&L Light shade/ Dark shade vitrified ceramic tiles of size 600 mm x 600 mm and 8-10 mm thick following the specifications as per IS 15622-2006, cut to required size set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles as in floor incl screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying of floor tiles incl dismantling of old tiles including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. |
| 2 | M&L Light shade/ Dark shade vitrified ceramic tiles of size 600 mm x 600 mm and 8-10 mm thick following the specifications as per IS 15622-2006, cut to required size set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles as in skirting/ dados incl incl rendering 10 mm thick in cement mortar 1 : 4 for fixing of tiles dismantling of old tiles including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. |
| 3 | M&L for Non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles incl screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying of floor tiles incl dismantling of floor tiles including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. |
| 4 | M&L for Glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surfaces such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over incl rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles incl dismantling of wall tiles & rendering upto wall surface and rubbish off premises or removing to store complete all as specified and directed. |
| 5 | M&L Machine cut Kota stone slab flooring 18-20 mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab incl proper edge moulding, rubbing & mirror-polishing incl screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying of kota stone incl dismantling of old floor kota stone including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. |
| 6 | M&L Machine cut Kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of the slab proper edge moulding, rubbing & mirror-polishing incl rendering 10 mm thick in cement mortar 1 : 4 for fixing of kota stone incl dismantling of old kota stone & rendering upto wall surface and rubbish off premises or removing to store complete all as specified and directed. |
| 7 | M & L Light/ Dark shade Endura Vitrified tiles 10 mm thick (square/rectangular) area of each tiles n exc 0.36 Sqm coloured cut to required size set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor incl screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying of floor tiles incl dismantling of old tiles including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. |
| 8 | M&L for 16 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 9 | M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand incl dismantling of old paver block and rubbish off the premises or removing to store complete all as specified and directed. |
| 10 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required incl demolition of old unreinforced kerb stone complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in sub-base flooring 25 mm thick surface finished even and rough to receive the topping layer incl demolition of old unreinforced sub base pcc complete all as specified and directed. |
| 12 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor incl demolition of old unreinforced sub base pcc complete all as specified and directed. |
| 13 | M&L for PCC 1:3:6 type C-2 using 40mm graded brick coarse aggregate as in sunken floors incl demolition of old sunken floor in neat and clean stage etc complete all as specified and directed. |
| 14 | M&L for Preparing surface including cleaning the concerned RCC surface by means of wire brush to expose the concrete surface which should be free from all loose particles, dust, laitance, etc of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall incl making corner fillets with Polymer modified cementitious (PMC) mortar (PMC:C:M :: 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with PMC mortar and Joints of pipes and concrete/masonry are to be sealed with epoxy putty or epoxy mortar (PMC:C :: 1:2 by weight) and the same is semi-rounded upto 5mm above surface level all along the periphery of PVC pipes and sunken floor shall be filled with graded cinder as per requirement of site complete all as specified. |
| 15 | M&L Modular Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of old brick work or stone/ boulder masonary built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 16 | M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & smooth without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) incl demolition of old unreinforced plinth protection complete all as specified and directed. |
| 17 | M&L for Pre-cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:4 incl demolition of old reinforcement cement concrete (Reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 18 | M&L Mild Steel TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 19 | M&L Rendering on fair faces of brick work or concrete surfaces of wall 15 mm thick in CM 1:6 and to be finished even and smooth without using extra cement incl taking down old cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 20 | M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement incl taking down old cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. Note (i) :- (a) Liquid WPC will be measured and paid separately. |
| 21 | M&L Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth incl taking down old cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 22 | M&L Rendering on fair faces of brick work or concrete surfaces of wall 15 mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L applying 1 mm thick Dr Fixit wall putty/ Berger Homeshield Putty/ Asian Paints acrylic Wall Putty on old/ new surfaces of wall or ceiling icluding complete removal of existing treatment in old surfaces complete all as specified and directed. |
| 24 | M&L for applying two coats of Acrylic distemper on wall or ceiling concrete surfaces over & including a coat of preparatory primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 25 | M&L preparation of old painted surfaces and applying one coat of acrylic distemper on walls or ceilings complete all as specified and directed. |
| 26 | M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of polyurethane paint complete all as specified and as directed. |
| 27 | M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of polyurethane paint complete all as specified and as directed. |
| 28 | M&L apply two coats (second coat should be applied perpendicular to the first one) of fiber reinforced elastomeric liquid (Damp proof) formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fibers over one coat of primer using roller all as specified and directed as manufacturer instruction complete all as specified and directed. |
| 29 | M & L for reparing of RCC projection, chajjas, roofs, facia, column etc by necessary preparation i.e scrapping ,cutting, chiseling, derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 3 storey bldgs complete all as specified & directed (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor). |
| 30 | Material & Labour for applying two or more coats of Water based latex polymer dispersed vinyl emulsion paint having VOC less than 30 gm/litre and conforming to IS 15489:2004, UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives between 0.90% to 1.10% by weight of paint over and including priming coat of acrylic cement exterior primer over new surfaces or old surfaces including complete removal of existing treatment complete all as specified and directed. |
| 31 | M&L for Heritage regular flakes finish which is made from china clay, pigments homo polymer emulsion and bonding agent Acrylic emulsion top coat (glossy/ matt finished) based on solvent based polymer 0.80 mm to 1.20 mm thick single coat as per approved shade, as per manufacturers instructions and applying on vertical surfaces of walls, columns, pipes soffits of beams and chajja etc complete all as specified and directed. Make:-Bakelite Hylum Ltd brand Heritage/Dolphin/Luxture or equivalent of higher specification as approved by GE. |
| 32 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 33 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 34 | Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed. |
| 35 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified and directed. |
| 36 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in section 8 of SSR-2020 part-II complete all as specified and directed. |
| 37 | Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads or metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 38 | S&F 3 mm thick sheet glass ordinary quality/ figured glass pin headed type as approved by Engr-In-Charge and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 39 | S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)(iv) 4 mm thick glass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(Min)(vii) Sliding rollers per shutter - 02 Nos.(Min)(viii) Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos.Note : Fabrication of aluminum door shall be done by authoried fabricator. |
| 40 | S&F Powder coated aluminium ventilator cross section 63.50 mm x 38.10 mm x 1.50 mm consisting of two portions upper portion shall have louvers with 3 mm thick pin headed glass and aluminium wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40 mm fixed with aluminium beads and securing on outer face of frame and lower portion of ventilator shall be fixed with 3 mm thick pin headed glass with IDPE rubber gasket including aluminium beads including prepartion of jambs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 41 | S & F Powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of chowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick.(e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Stainless steel Grade 304 handle eisc type -02 Nos per shutter ( inside & out side). (h) Stainless steel Grade 304 door stopper heavy duty-01 Nos per shutter. (i) Stainless steel Grade 304 tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality make and type as approved by GE openable both from inside & out side -01 Nos per shutter.Note : Febrication of aluminum door shall be done by authoried fabricator. |
| 42 | S&F Door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed. |
| 43 | M&L in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 44 | S&F in repairs Door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed. |
| 45 | S&F in repairs Aluminium Mortice lock 2 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed. |
| 46 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 47 | Providing and fixing factory made uPVC white colour fixed / louvered ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 48 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T-profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 49 | S&F 5 mm thick Toughned glass as in Window panes, partitions, automatic doors and similar work including cutting to shape, drilling holes required. (Note : (i) All measurements of cutting shall, unless otherwise stated, include the consequent waste and breakages involved. (ii) The rate includes for any framing required as per site condition.) |
| 50 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 51 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed. |
| 52 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 53 | S&F 200 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 54 | S&F Aluminum alloy anodised sliding door bolts with hasp & staple (Bolt type) and fixing clips of sheet, cast extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed. |
| 55 | M&L Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 for 100 mm long complete all as specified and directed. |
| 56 | S&F Floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge |
| 57 | S&F in repairs Door seal with aluminium beading and 50 mm wide rubber seal complete fixed to aluminium/ Wooden doors complete all as specified and directed. |
| 58 | S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 59 | Providing and fixing in repairs Cupboards/ Wardrobes factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush shutters of thickness 18/19 mm thick comprises virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter all as per direction of Engineer- In- Charge. |
| 60 | S & F Continuous (piano) hinges of brass with width of flaps (when open) 40 mm complete all as specified and directed. |
| 61 | S&F 125 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws omplete all as specified and directed. |
| 62 | S&F 200 mm Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 63 | S&F 150 mm long Brass barrel tower bolts, but with barrel of extruded section and fixed complete all as specified and directed. |
| 64 | S&F in repair Stainless steel fancy type curtain rod 25 mm dia incl curtain support as approved complete all as specified and directed |
| 65 | S&F in repair SS Globes for 25 mm dia curtain rod as approved by Engr-In-Charge complete all as specified and directed. |
| 66 | S&F in repair SS Curtain rod Bracket fancy type for single curtain rod 25 mm dia of any colour as approved complete all as specified and directed. |
| 67 | Supplying and laying of CPVC pipes with outer dia 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all necessary fittings including taking down old pipes complete all as specified and directed. |
| 68 | Supplying and laying of CPVC pipes with outer dia 25 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all necessary fittings including taking down old pipes complete all as specified and directed. |
| 69 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches or fixed to walls (incl stack clamps as required at site or as approved) incl taking down of old eave gutters and rainwater pipes of any size or pattern including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed. |
| 70 | S&F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints laid in floors, trenches or fixed to walls (incl stack clamps as required at site or as approved) incl taking down of old eave gutters and rainwater pipes of any size or pattern including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed. |
| 71 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches or fixed to walls (incl stack clamps as required at site or as approved) incl taking down of old eave gutters and rainwater pipes of any size or pattern including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed. |
| 72 | S&F PVC(SWR) bends, any radius of 110 mm bore without access door complete all as specified and directed. |
| 73 | S&F PVC(SWR) bends, any radius of 150 mm bore without access door complete all as specified and directed. |
| 74 | S&F PVC(SWR) bends, any radius of 75 mm bore without access door complete all as specified and directed. |
| 75 | S&F PVC (SWR) Floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement 75mm dia etc complete all as specified and directed. |
| 76 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 77 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 78 | M&L for Fe 410-W (Gde E-250 quality A) Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc complete all as specified and directed |
| 79 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 80 | M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 81 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including dismantling of old asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 82 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 83 | M & L for preparation of new steel surfaces any description n exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 84 | S & F Polycarbonated Water-proof film caoted/ transparent plain sheet 10 mm thick of any colour in roof covering/ cladding to wall, sunshed etc fixing/ joint /overlap incl requisite material all as per manufactureres instructions complete all as specified and directed. |
| 85 | S&F Solid or Feather edged PVC Wall Lining consisting of 5 mm thick Wood grain printed PVC sheet inclusive of Solvent Cement and fixing at site including PVC frames, fillets etc as required with manufactured approved adhesives as per specifications and drawing incl taking down old wall panel and similar work and removing to store and complete all as specified and directed. |
| 86 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions incl taking down of old ceiling boards complete all as specified and directed. (Note : Frame work for ceiling shall be measured and paid separately) |
| 87 | S&F Exposed metal frame ceiling with 8 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid incl taking down of old ceiling boards complete all as specified and directed. (Note : Frame work for ceiling shall be measured and paid separately) |
| 88 | S&F in repairs Anodised aluminium sanp grid 605 x 605 mm frame work for false ceiling incl hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed |
| 89 | Providing and fixing perforated/ semi-perforated Gypsum Board 12mm thick (acoustic purpose) in walling fixed with screw as per manufacturers instructions incl taking down of old boards complete all as specified and directed. |
| 90 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed |
| 91 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed |
| 92 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 2000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed |
| 93 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 5000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed |
| 94 | S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed. |
| 95 | S & F in repair Corner glass shelf of size 300 mm with brackets complete all as specified and directed. |
| 96 | S & F in repair chromium plated towel ring with bracket complete all as specified and directed. |
| 97 | S&F in repair 15 mm bore chromium plated central hole Basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed |
| 98 | S&F in repair Chromium plated wall mixer 3-in-1 system telephonic, connecting legs and wall flange complete all as specified and directed. |
| 99 | S&F in repair Vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 100 | S&F in repair Vitreous China wash basin, angle back (counter-type/ table top), size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 101 | S&F in repairs Vitreous pedestal china for WHB as per suilable for WHB size 550x400 mm complete all as specified and directed. |
| 102 | S & F in repair Bottle trap chromium plated for WHB as per approved quality all as per specified and directed. |
| 103 | S & F in repair Europian WC floor/ Wall mounted cascade pattern vitreous china with dual core flushing cistern incl all fitting flush pipe etc (white/ ivory/off white ; closed pattern incl all necessary accessories) complete all as specified and directed. |
| 104 | M&L in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed. |
| 105 | M&L in repairs Vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed. |
| 106 | S&F in repairs Plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. (Note : Colour should be in harmony with EWC.) |
| 107 | S&F in repairs 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. |
| 108 | S & F in repairs Health faucet (ABS Body) mild steel pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 109 | S&F in repair PVC connection 15mm dia size with PTMT nuts and 450 mm long complete all as specified and as directed. |
| 110 | S&F in repair Looking Mirror 5.5 mm thick of selected quality glass bevelled edge, backing with multi-layer coating system of Silver/ Aluminium/ Polypropylene adhesive film or any pro-active paint and fixed with chromium plated brass screw and cup washers complete as specified and directed. |
| 111 | S&F in repair Looking Mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washers including aluminium anodized frame complete as specified and directed. |
| 112 | S&F in repair Bib taps 15 mm bore, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 113 | S&F in repair Two-way Bib taps 15 mm bore, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 114 | S&F in repair Brass chromium plated tubular towel rail 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 115 | S&F in repair Angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 116 | S&F in repair Two-way Angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 117 | S&F in repair Stainless Steel Soap dish complete all as specified and directed by Engineer-In-Charge. |
| 118 | S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 119 | S&F in repair Chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. |
| 120 | S&F in repair Glass shelf assembly cosisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. |
| 121 | S&F in repair Pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure with or without lettered hot or cold with long screwed sharks and ply nuts 15 mm dia complete all as specified and directed. |
| 122 | S&F in repair PVC waste pipe for WHB etc all as specified and directed. |
| 123 | S&F in repairs 32 mm bore dia waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed |
| 124 | S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed |
| 125 | S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm complete all as specified and directed |
| 126 | S& F in repair 1 mm thick stainless steel plate rack of size 900X900X200 incl fixing with rawal plug and screws complete all as specified and directed. |
| 127 | S&F in repair Brass chromium plated tubular towel rail 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 128 | S&F in repairs Flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed. |
| 129 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed. |
| 130 | S&F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. (Note : (i) All measurements of cutting shall, unless otherwise stated, include the consequent waste and breakages involved. (ii) The rate includes for any framing required as per site condition.) Please Enable Macros to View BoQ information |
