|
| 1 | Periodical/ Preventive/ Comprehensive maintenance of Nurse Call and Patient Calling Sysytem by checking any type of complaints like resetting, programming of calling system, no electric supply to control panel etc. including carrying out repairs as required to make it functional by replacing necessary items complete all as specified and directed by engr in charge. Note:- (i) The entire comprehensive maintenance of Nurse calling & Patient Calling system shall be carried out through OEM (Stephan Design & Engineering Ltd) or OEM approved dealer and the defective components/ parts of different system shall be replaced with existing make only. (ii)The contractor may visit the site for inspection with service engineer of OEM/ Manufacturer of the system before quoting his rate. (iii) The contractor shall maintain proper record of repair / maint in a binded register duly bringing out the details of spares replaced and get it authenticated from concerned JE E/M. The contractor shall put up the maint record register to Engineer-in-charge for inspection when asked for. (vi) Spares required will measured under relevant Sch 'A' item no 2 to 21 as supply only. |
| 2 | Supply only Bed side unit mother board complete all as specified & directed. |
| 3 | Supply only 100 Amp 9 V Transformers complete all as specified & directed. |
| 4 | Supply only Wireless Communication Modules complete all as specified & directed. |
| 5 | Supply only central display Mother board complete all as specified & directed. |
| 6 | Supply only Corridor display PCB complete all as specified & directed. |
| 7 | Supply only Doctor calling Unit mother board complete all as specified & directed. |
| 8 | Supply only 5V 2 Amp Adaptor complete all as specified & directed. |
| 9 | Supply only nurses station terminal monitor station with built-in LCD display and Call Console System having plug in type Single digital Module for each bed with suitable digital electronic components with three colour indication, with power supply suitable for 220 volts, 50 Hz, AC main supply with step-down transformer of appropriate rating , electronic rectifier with regulating circuits to give two numbers of DC outputs of + 12V DC through battery/panel and battery charger , all housed in powder coated sheet steel enclosure ,network interface module,power supply as per specification for Nursing station terminal, LED Type, catering to 08 beds complete all a specified & directed. |
| 10 | All all as item no 9 above but 16 beds |
| 11 | All all as item no 9 above but 24 beds |
| 12 | All all as item no 9 above but 30 beds |
| 13 | Supply only bed side unit indication and call module recessed/wall mounted/bed head panel, Non-voice type with digital membrane,switches having three colour indication, call and cancel button (reset button) as per specifications required with remote, as per specifications enclosed complete all as specified & as directed. |
| 14 | Supply only Hand Held Wired Remote to initiate the call, whenever patient presses the button, hand set shall also have all three colours, hand held module and call and cancel button (reset button) as per required specifications complete all as specified & as directed. |
| 15 | Supply only Emergency Alert call modules for Toilet comprising call button, call status indicators with 4 colour LED lamps and water protected enclosure complete all as specified & directed. |
| 16 | Supply only Pull Cord connected to Nurse Call station complete all as specified & directed. |
| 17 | Supply only Door display unit as per specifications complete all as specified & as directed. |
| 18 | Supply only Main Central Display Unit complete all as specified & directed. |
| 19 | Supply only Slave Central Display Unit complete all as specified & directed. |
| 20 | Supply only Room desk Unit complete all as specified & directed. |
| 21 | Supply only Corridor door display Unit complete all as specified & directed. |
| 22 | Supply & Lay of Cat 6- 4 Pair, 23, AWG, UTP Cable with cross member pair seperator complete all as specified and as directed (For Nurse Call) |
| 23 | M&L for Taking down of single Headed Oblique type gun metal fire hydrant valve 63 mm dia complete all as specified and directed. |
| 24 | S&F ISI marked single headed 63 mm dia. gun metal Hydrant Valve, flanged inlet with 63 mm female instantaneous outlet confirming to IS : 5290 on the fire wet riser/down comer including making 80 NB pipe connection with riser fixing the landing valves in proper positions, including supply of nuts, bolts, gaskets, caps, chains etc. testing the hydrant and completing the work in all respect all as specified and directed. Make - Kartar/Zoloto/Normex |
| 25 | S&F in repair gun metal ISI marked 63 MM. dia. Instantaneous pattern short branch pipes & 12.5 mm dia. Nozzle suitable for inter connections to hose pipe coupling as required complete all as specified and directed. |
| 26 | S&F in replacement Outlet nozzle cap along with chain fixed on hydrant 63mm as required complete all as specified and directed. |
| 27 | Taking down of Female Adaptor gun metal for fire hydrant valve 63 mm dia. complete all as specified and directed. |
| 28 | Supply and Fix of female adaptor (Gun metal) suitable for 63 mm dia fire Oblique type fire hydrant valve complete all as specified and directed. |
| 29 | M&L for Red colour Painting on Fire hydrant Pipe of dia 80 mm/100mm/150 mm by scrapping the old surface and applying two coat of synthetic enamel paint on the surface and making good any disturbed surface complete all as specified and directed. |
| 30 | Servicing of valve any type and size opening greasing running part required new gland fitting and reassemble again complete all as specified and directed. Note : Items required for replacement shall be measured and paid seperately |
| 31 | Supply and apply Grease of Suitable Grade complete all as specified and directed. |
| 32 | S&F Gland of suitable size complete all as specified and directed. Please Enable Macros to View BoQ information |
| 33 | S&F Gland of suitable size complete all as specified and directed. Please Enable Macros to View BoQ information |