Tender For Comprehensive Maintenance Works To Buildings Including Internal B/R Services Inside Cabs, Cemilac And Stir Under Age Br-Ii At Bangalore.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Works To Buildings Including Internal B/R Services Inside Cabs, Cemilac And Stir Under Age Br-Ii At Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolition of unreinforced cement concrete as in sub base not exc 150 mm thickness including removing the debris from the building and upto 50m complete all as specified and as directed. |
| 3 | Material and labour for 100mm thick Plain Cement Concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 4 | Material and labour for 25mm thick Plain Cement Concrete type B-1, (1:2:4) using 20mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 5 | Material and labour for 15 mm thick cement mortar screed bed / bedding layer in CM 1:4 (1 cement : 4 coarse sand) for receiving floor finishes, laid to required levels, slopes and alignment, including surface preparation, mixing, placing, compacting, finishing, curing and all labour, materials, tools and incidental works complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | Providing and laying 9-10mm thick double charge vitrified tiles, polished finish of size 600 x 600 mm with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shades, laid over prepared base using approved polymer modified tile adhesive conforming to IS 15477, applied with notched trowel as per manufacturer’s instructions, including maintaining uniform joints using 5 mm thick PVC tile spacers, complete. The joints shall be filled and finished with approved epoxy based tile grout of matching shade, including cleaning of surface, curing where required and removal of spacers complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for polished vitrified ceramic floor tiles of approved make, light shade, square or rectangular in shape, 10 mm thick, with area of each tile not exceeding 0.36 sqm, laid true to line, level and pattern, including preparation of surface, setting the tiles in neat cement slurry, cutting and fitting where required, filling and pointing joints with white or coloured cement to match the tile shade, and all labour, materials, tools, wastage, curing and incidental works complete all as specified and as directed by the Engineer-in-Charge |
| 8 | Providing and laying 9-10mm thick Non skid Ceramic floor tiles of size upto 0.36 sqm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over prepared base using approved polymer modified tile adhesive conforming to IS 15477, applied with notched trowel as per manufacturer’s instructions, including maintaining uniform joints using 5 mm thick PVC tile spacers, complete. The joints shall be filled and finished with approved epoxy based tile grout of matching shade, including cleaning of surface, curing where complete all as specified and as directed. |
| 9 | Material and labour for non-skid ceramic floor coloured tiles of approved make, square or rectangular in shape, 7–8 mm thick, having area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, laid true to line, level and pattern, set in neat cement slurry over prepared screed bed, including cutting and fitting where required, filling and pointing joints with white or coloured cement to match the tile shade, and all labour, materials, tools, wastage and incidental works complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | Material and labour for 10 mm thick cement plaster/rendering in cement mortar 1:4 (1 cement : 4 coarse sand) on fair faces of brick masonry or concrete surfaces in vertical locations, as a backing coat for receiving wall tiles, including preparation and cleaning of the surface, raking out joints where required, rendering true to line, level and plumb, finishing with a roughened key for proper adhesion of tiles, curing, and all labour, materials, tools and incidental works complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | Providing and laying 9-10mm thick double charge vitrified tiles, polished finish of size 600 x 600 mm as in skirting with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shades, laid over prepared base using approved polymer modified tile adhesive conforming to IS 15477, applied with notched trowel as per manufacturer’s instructions, including maintaining uniform joints using 5 mm thick PVC tile spacers, complete. The joints shall be filled and finished with approved epoxy based tile grout of matching shade, including cleaning of surface, curing where required and removal of spacers complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour for polished vitrified ceramic tiles of approved make, light shade, square or rectangular in shape, 10 mm thick, with area of each tile not exceeding 0.36 sqm, in skirting, laid true to line and level, set in neat cement slurry over prepared backing surface, including cutting, shaping and fitting around corners and junctions, filling and pointing joints with white or coloured cement to match the tile shade, cleaning the finished surface, and all labour, materials, tools, wastage and incidental works complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | Providing and fixing 1st quality 8-10mm thick coloured glazed vitrified tiles of area not less than 0.36 sqm in dado/skirting, conforming to IS: 15622, of approved make, in all colours and shades except burgundy, bottle green and black, of size and pattern as approved by the Engineer-in-Charge, fixed over properly prepared and cleaned base including applying a uniform coat of approved liquid waterproofing compound over the surface as per manufacturer’s specifications, and allowing the same to cure, there after laying tiles using approved polymer modified tile adhesive conforming to IS: 15477, applied with notched trowel as per manufacturer’s instructions, maintaining uniform joints using 5 mm thick PVC tile spacers, including cutting, fitting, finishing, and alignment to true line and level; the joints shall be filled with approved epoxy based tile grout of matching shade, including cleaning of surface, curing where required, removal of spacers and making good the finished surface complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for glazed ceramic coloured wall tiles of approved make, shade and finish, size 350 × 250 × 7 mm or 450 × 350 × 7 mm thick, on vertical surfaces, laid true to line, level and plumb, set in neat cement slurry over prepared backing coat, including cutting, drilling, shaping and fitting around fixtures, filling and pointing joints with white or coloured cement to match the tile shade, cleaning the finished surface, and all labour, materials, tools, wastage and incidental works complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Dismantling stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons, paths, plinth protection and similar locations, including removal of mortar bedding, breaking up, lifting, stacking serviceable materials separately and disposal of unserviceable materials and debris within a lead of 50 m, complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Material and labour for Green Marble work of approved quality, 18–20 mm thick, table rubbed and polished, in steps, jambs, pillars, window sills, cooking platforms and similar locations, laid and bedded in cement mortar 1:4 (1 cement : 4 coarse sand), including cutting, dressing, edge finishing, jointing and pointing in white cement mixed with marble dust in the ratio of 1:2 with suitable pigment to match the shade of the marble complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | Material and labour for granite 20 mm thick of any type work (table rubbed and polished) as in steps, jambs, pillars, window sills, cooking platforms and similar locations and like ,in cement mortar (1:4) including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed complete all as specified and as directed. |
| 18 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 19 | Material and labour for 40mm thick Plain Cement Concrete, type B-1, (1:2:4) using 20mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 20 | Material and labour for Chequered cement concrete tiles (with grey cement and pigment) manufactured in rubber moulded finish of size not less than 30cm x 30cm x 22 to 25 mm thick, set, jointed and pointed in near cement slurry over and including 15 mm thick cement mortar screed in CM (1:6) as in floors complete all as specified and as directed. |
| 21 | All as per Ser item No 20.00 above but except tiles including making good of undulated tiles set right and leave all surroundings finished as it is complete all as specified and as directed. |
| 22 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor and roof complete all as specified and as directed. |
| 23 | Material and labour for 75mm thick plain cement concrete type C-1 (1:3:6), using 20mm graded crushed stone aggregates as in plinth protection finished fair and even without using extra cement complete all as specified and as directed.NOTE :- The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item. |
| 24 | Material and labour for 100mm thick Plain Cement Concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 25 | Material and labour for 40 mm thick Plain Cement Concrete type B-2, (1:2:4) using 20mm graded stone aggregate as in hard standing including spike rolling or making impressions of expanded metal complete all as specified and as directed. |
| 26 | Material and labour for providing Vacuum Dewatered Concrete (VDF) flooring using Ready Mix Concrete of grade M-25, laid to required line, level, slope and thickness as shown on drawings or as directed by Engineer-in-Charge, including necessary side shuttering with MS channels/forms, compacting and leveling with double screed vibrator, dewatering by approved vacuum pump with suction mat system to remove excess water, surface finishing by floating and re-vibrating as required, finishing with skim floater and power trowel to obtain dense, smooth and hard wearing surface, incorporating approved non-metallic dry shake floor hardener @ 3.00 kg per square metre uniformly broadcast over green/wet concrete and machine finished, including preparation of existing base/surface by brooming, air pressure cleaning and removal of all dust, dirt, laitance and loose particles, including curing, edge finishing, complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and labour for forming Contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed. |
| 28 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including demolition of old unserviceable kerb stones and removing the debries from the site all as specified and as directed. |
| 29 | Material and labour prepration of new surfaces and for applying two coat of synthetic enamel paint of approved shade on kerb stone, concrete or plaster surface of any description not otherwise specified including preparation of old surfaces complete all as specified and as directed. |
| 30 | Material and labour for applying one coat of terracotta paint on tiles, brick, stone, concrete or plaster surface of any description not otherwise specified including preparation of old surface complete all as specified and as directed. |
| 31 | Material and labour for applying one coat of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of old surface complete all as specified and as directed. |
| 32 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 33 | Material and labour for pre-cast cement concrete block masonry type C1 1:3:6 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement and sand mortar (1:6) complete all as specified and as directed. |
| 34 | Taking down cement plaster on brick or stone walls / celling etc including raking out joints, hacking for key complete all as specified and as directed.NOTE :- Work shall be executed for buildings of height upto 20 Mtr including all necessary scaffolding. |
| 35 | Material and labour for rendering 10 mm thick in CM (1:4) on surfaces other than fair faces of brick work complete all as specified and as directed.NOTE :- Work shall be executed for buildings of height upto 20 Mtr including all necessary scaffolding. |
| 36 | Material and labour for rendering 15 mm thick on wall surface in CM (1:4) mixed with and including water proofing compound complete all as specified and as directed.NOTE :- Work shall be executed for buildings of height upto 20 Mtr including all necessary scaffolding. |
| 37 | Supply only integral water proofing compound complete all as specified and as directed. |
| 38 | Material and labour for rendering 5 mm thick on ceiling / chajja / walls in CM (1:3) complete all as specified and as directed.NOTE :- Work shall be executed for buildings of height upto 20 Mtr including all necessary scaffolding. |
| 39 | Material and labour for preparation of newly plastered wall surfaces and applying a coat of primer and two coats of oil bound distemper of approved shade complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 20 Mtr including all necessary scaffolding. |
| 40 | Material and labour for applying two coats of exterior emulsion weather proof paint over a coat of primer on new plaster wall surfaces including preparation of new plaster complete all as specified and as directed.NOTE :- Work shall be executed for buildings of height upto 20 Mtr including all necessary scaffolding. |
| 41 | Material and labour preparation of newly plastered wall surfaces and applyingtwo coats of white wash on ceiling shade all as specified and directed. |
| 42 | Taking down or up steel tubing and connections and removing to store yard of size 20mm bore complete all as specified and as directed. |
| 43 | All as per Ser item No 42.00 above but of 25/32mm bore. |
| 44 | Supplying and laying of CPVC pipes 20mm bore, SDR 11 and Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and as directed. |
| 45 | All as per Ser item No 44.00 above but of size of 25 mm bore |
| 46 | Supply and fixing in repairs of Brass Elbow fixing with CPVC pipes outer diameter 20mm complete all as specified and as directed. |
| 47 | Supply and fixing of Brass Elbow in repairs fixing with CPVC pipes outer diameter 25mm complete all as specified and as directed. |
| 48 | Supply and fixing in repairs of Female Brass Threaded Adaptor fixing with CPVC pipes outer diameter 20mm complete all as specified and as directed. |
| 49 | Supply and fixing in repairs of Female Brass Threaded Adaptor fixing with CPVC pipes outer diameter 25mm complete all as specified and as directed. |
| 50 | Supply and fixing in repairs of Brass Tee fixing with CPVC pipes outer diameter 20mm complete all as specified and as directed. |
| 51 | Supply only CPVC nail clamp of 20/25 mm dia complete all as specified and as directed. |
| 52 | Supply only CPVC gate valves of 20 mm dia complete all as specified and as directed. |
| 53 | Supply only CPVC gate valves of 25 mm dia complete all as specified and as directed. |
| 54 | Supply only PVC Tank nipple of size 20 / 25 mm dia as per requirement complete all as specified and as directed. |
| 55 | Supply only PVC Tank adaptor of size 20 /25 mm dia as per requirement complete all as specified and as directed. |
| 56 | Supply only FABT (female adopted brass threaded) / MABT (male adopted brass threaded) of size 20 / 25 mm dia as per requirement complete all as specified and as directed. |
| 57 | Taking down CI / AC / PVC pipe 75 / 110 / 160 / 200 mm dia as in soil pipe or rain water pipe complete all as specified and as directed. |
| 58 | Supply and fix in repairs PVC (SWR) pipes, type 'B' single socketed 200 mm bore fixed in walls including all clamps and shoes complete all as specified and as directed. |
| 59 | Supply and fix in repairs PVC (SWR) pipes, type 'B' single socketed 160 mm bore fixed in walls including all clamps and shoes complete all as specified and as directed. |
| 60 | Supply and fix in repairs PVC (SWR) pipes, type 'B' single socketed 110 mm bore fixed in walls including all clamps and shoes complete all as specified and as directed. |
| 61 | Supply and fix in repairs PVC (SWR) pipes, type 'B' single socketed 75 mm bore fixed in walls including all clamps and shoes complete all as specified and as directed. |
| 62 | Supply and fix in repairs PVC (SWR) pipes, type 'B' single socketed 75 mm bore laid in floors as drain pipe including all clamps and shoes complete all as specified and as directed. |
| 63 | Supply and fix in repairs 200 mm PVC (SWR) bends, type 'B' any radius complete all as specified and as directed. |
| 64 | Supply and fix in repairs 160 mm PVC (SWR) bends, type 'B' any radius complete all as specified and as directed. |
| 65 | Supply and fix in repairs 110 mm PVC (SWR) bends, type 'B' any radius complete all as specified and as directed. |
| 66 | Supply and fix in repairs 75 mm PVC (SWR) bends, type 'B' any radius complete all as specified and as directed. |
| 67 | Material and labour for petty repairs to leaking water in bib tap, pillar tap, stop cock, angle valve of any description by changing the washer etc complete all as specified and as directed. |
| 68 | Removal of air lock / blockage of water in GI, tubing 15 mm / 20mm bore cleaning the pipe or fittings etc and re-fixing the same in position complete all as specified and as directed. |
| 69 | Material and labour for petty repairs / adjustment or changing to washer / syphon etc for high level or low level flushing cistern and making functional complete all as specified and as directed. |
| 70 | Supply and fix in repairs PVC syphon with handle complete for low level flushing cistern of any description size and pattern complete all as specified and as directed. |
| 71 | Supply only Elbow, Tee, Collar, union of size 20 mm bore complete all as specified and as directed. |
| 72 | Supply only Elbow, Tee, Collar, union of size 25 mm bore complete all as specified and as directed. |
| 73 | Supply only plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified and as directed. |
| 74 | Supply only Stop valve / angle cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of bore 15mm fixed complete all as specified and as directed. |
| 75 | Supply and fix in repairs angle valve 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and as directed. |
| 76 | Supply and fix in repairs angle valve two way 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and as directed. |
| 77 | Supply only Pillar tap cast copper alloy, with fancy type chromium plated, screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm dia complete all as specified and as directed by Engineer-In-Charge.NOTE :- Weight of pillar tap shall not be less than 665 gms. |
| 78 | Supply and fix in repairs pillar tap cast copper alloy, with fancy type, chromium plated, screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm dia complete all as specified and as directed by Engineer-In-Charge.NOTE :- Weight of pillar tap shall not be less than 665 gms. |
| 79 | Supply only Chromium plated bib cock 2 way double handle with flange complete all as specified and as directed. |
| 80 | Supply and fix in repairs Bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed complete all as specified and as directed. |
| 81 | Supply only Chromium plated bib tap cast copper alloy 15mm bore pipe fancy type any description complete all as specified and as directed. |
| 82 | Supply only Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 83 | Supply only Ball brass valve high pressure with polythene float and fly out nut, screwed for iron pipe or brass ferrule and fixed to 20 mm dia of pipe complete all as specified and as directed. |
| 84 | Supply only Ball brass valve high pressure with polythene float and fly out nut, screwed for iron pipe or brass ferrule and fixed to 25mm dia of pipe complete all as specified and as directed. |
| 85 | Supply and fix in repairs of PVC valveless, symphonic action type, flushing cistern, low level , white with inlet,ball valve, float and handle including brackets flushing cistern 10 litre capacity complete all as specified and as directed. |
| 86 | Supply and fix in repairs of flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and as directed. |
| 87 | Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm, fixed as in repairs complete all as specified and as directed. |
| 88 | Supply and fix in repairs PVC connection 15 mm dia 450mmm long with 2 Nos PVC check nuts with washer complete all as specified and as directed. |
| 89 | Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed. |
| 90 | Supply and fix vitreous China water closet, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap and to flush pipe ,anti syphonage pipe , etc making good to floor complete all as specified and as directed. |
| 91 | Supply and fix in repairs 32 mm dia PVC waste pipe for WHB & sink 90 cm long with union complete all as specified and as directed. |
| 92 | Supply only flushing cistern kit for cascade type EWC of any pattern and description complete all as specified and as directed. |
| 93 | Providing and fixing 15mm bore CP brass wash basin mounted type swan neck pillar tap complete all as specified and as directed. |
| 94 | Supply and fix in repairs 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 95 | Providing and fixing white colour smart flow sensor operated Hand Dryer, dimension / size 145x138x258mm, sensing range 15-25cm, one piece cover in ABS thermoplastic + talcum base, fixed to base by two screws, class B brush motor, electronic infrared sensor type, PP UL94-V0 helicodial fan wheel, heating element incorporates a safety thermal cut-off all as per manufacturers specification and direction of Engineer-in-Charge.MAKE :- Jaquar product code : HDR-WHT-M04A or techno commercially equivalent models of makes specified in PS |
| 96 | Providing and fixing 15 mm nominal bore chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology complete all as specified and as directed. |
| 97 | Providing and fixing vitreous China counter type wash basin of size 595 x 420 x 200mm, weight 10.80 Kg, with waste coupling, and PVC waste pipe and including fixing brackets, complete suitable for pipe of bore 15mm. and including taking down as per manufacturers specification and direction of Engineer-in-Charge.MAKE :-: Jaquar model name : CNS-WHT-705 ll or techno commercially equivalent models of makes specified in PS |
| 98 | Providing and fixing vitreous China table top wash basin of size 595 x 420 x 200mm, weight 10.80 Kg,with waste coupling, and PVC waste pipe and including fixing brackets, complete suitable for pipe of bore 15mm and including taking down as per manufacturers specification and direction of Engineer-in-Charge.MAKE :- Jaquar, model name : CNS-WHT-705 ll or techno commercially equivalent models of makes specified in PS |
| 99 | Supply and fix in repairs of Chromium plated shower roses with or without swivel joints, any size, including fixing to pipe or union Finish complete all as specified and as directed. |
| 100 | Supply and fix sinks made of stainless steel 1.00 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and including taking down complete all as specified and as directed. |
| 101 | Providing and fixing floor / wall mounted, white vitreous China single piece, double traps symphonic water closet of approved brand / make, shape, size and pattern including integrated white vitreous China cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 102 | Providing and fixing in repairs of Stainless steel towel rail complete with brackets fixed to wall with CP brass screws with concealed fitting arrangements of approved quality and colour 600 mm long towel rail complete all as specified and as directed. |
| 103 | Supply only 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 104 | Supply and fix in repairs vitreous China urinal, half stall type white, with CP grating, urinal spreader, union and discharge waste pipe and including fixing brackets complete all as specified and as directed. |
| 105 | Providing, supplying, installing, testing and commissioning of one-piece wall-hung vitreous China urinal bowl with inbuilt/integrated infrared sensor-based automatic flushing system (sensor and flushing mechanism housed within the bowl body), complete with factory-fitted battery-operated control unit (using alkaline/lithium batteries), adjustable flush volume and detection range, 15 mm dia CP brass angle valve, inlet connection, 32/40 mm waste outlet connection to trap, waste coupling, fixing brackets, and all necessary fittings and accessories, including leak testing, sensor calibration and commissioning, all complete as per specifications and direction of Engineer-in-Charge. |
| 106 | Providing, supplying, installing, testing and commissioning of infrared sensor-based automatic flushing sensor kit only for urinal, comprising sensor module, solenoid valve, control unit with battery-operated power pack (alkaline/lithium), adjustable detection range and flush timing, inlet strainer and flow control mechanism, complete with necessary internal connections, mounting accessories and fittings compatible with existing urinal and water supply line, including testing, calibration and commissioning for proper hands-free operation, all complete as per specifications and direction of Engineer-in-Charge. |
| 107 | Material and labour for servicing of infrared sensor-based urinal flushing system, including thorough inspection, cleaning and maintenance of sensor module, removal of dirt, scale and moisture from sensor eye and housing, checking and tightening of all electrical and mechanical connections, testing of solenoid valve operation, cleaning / replacement of inlet strainer, adjustment of sensor detection range and flush timing, checking for leakages and proper functioning of flush mechanism, including replacement of worn-out components as required, and replacement of urinal sensor batteries with new alkaline / lithium batteries, complete with testing, calibration and commissioning to ensure smooth, hygienic and hands-free operation complete all as specified and as directed. |
| 108 | Providing and fixing of curve HPL board 10mm thick urinal partition curved on edges dimension 450 x 900mm Smooth edges, moisture-resistant, termite-proof, long-lasting, fixed to walls with stainless steel fittings all as per manufacturers specification and direction of Engineer-in-Charge. |
| 109 | Supply and fixing for chrome plated toilet paper holder and drilling on wall and fixing with screws etc complete all as specified and as directed. |
| 110 | Supply and fixing in repair Soap dish, any type, fixed to plugs with chromium plated brass screws, approximate size 160 x 160 x 90mm complete all as specified and as directed. |
| 111 | Material and labour for PVC (SWR) multi floor trap with 75 mm outlet including SS grating including jointing with solvent cement complete all as specified and as directed. |
| 112 | Supply and fix in repairs of stainless steel grating 125 mm dia round (with holes / without holes as per site condition ) fixed on floor / nahani trap fixed with cement mortar complete all as specified and as directed. |
| 113 | Supply and fix in repairs of CP urinal cock / spreader of approved quality and 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms complete all as specified and as directed. |
| 114 | Supply and fix in repairs of CP 32 mm dia waste coupling for wash basin and sink of approved quality and colour complete all as specified and as directed. |
| 115 | Supply and fix in repairs of CP 40 mm dia waste coupling for wash basin and sink of approved quality and colour complete all as specified and as directed. |
| 116 | Supply and fix in repairs Rotational moulded polythene water storage tanks double layered (cylinder each vertical with closed top) of capacity 500 Itrs, ISI marked, hoisted and fixed in position including disconnecting existing tanks of any description all as specified in SSR Part-1 complete all as specified and as directed. |
| 117 | All as per Ser item No 116.00 above but of size 1000 ltrs |
| 118 | All as per Ser item No 116.00 above but of size 2000 ltrs |
| 119 | Supply only overhead tank cover of PVC for 500 ltr / 1000 ltr and 2000 ltr tank complete all as specified and as directed. |
| 120 | Material and labour for providing and fixing 12 mm thick High Pressure Laminate (HPL) Compact Board of approved make, for toilet partitions, wall cladding or similar approved locations, manufactured under high pressure with phenolic resin core, 100% waterproof, termite proof and fire retardant, of approved shade, texture and finish, fixed in required size and pattern with approved aluminium/SS fittings, channels, brackets, screws, fasteners and accessories as required. All exposed edges shall be machine finished, chamfered / bevelled to smooth radius and neatly polished. Item includes dismantling and removing old damaged boards, fittings and connected components, clearing debris from site, making good disturbed surfaces and fixing new boards complete all as specified and as directed by Engineer-in-Charge. |
| 121 | Supply and fix Adjustable support legs (pedestals) SS Grade 316) to support pilasters, with a typical clearance height of 100 mm to 150 mm from the floor complete all as specified and as directed. |
| 122 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings including stainless steel door handle and all connected stainlessteel fittings, all complete as per direction of Engineer-in-Charge. |
| 123 | Providing and fixing frameless glass partition using 12 mm thick clear toughened glass, edges machine polished and finished, fixed in position with stainless steel fittings such as patch fittings, connectors, brackets, clamps and necessary hardware of grade SS-304, including EPDM / neoprene gaskets, structural silicone sealant, SS screws, bolts, washers and all fixing accessories, including dismantling old damaged one complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Taking down chowkats or frame (without taking off shutter from the frame) exc. 1.50 sqm but n. exc. 4.00 Sqm each complete all as specified and as directed. |
| 125 | Taking down chowkats or frame (without taking off shutter from the frame) area n exc. 1.50 sqm complete all as specified and as directed. |
| 126 | Taking down shutters of any description and refixing in same position area not exceeding 1 sqm each complete all as specified and as directed. |
| 127 | All as per Ser item No.126.00 above but area exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and as directed. |
| 128 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows and other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 129 | NOTE:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 130 | All as per Ser item No 128.00 above but of Frame size 50 x 100 mm |
| 131 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. |
| 132 | Supply and fix mild steel / alumium butt hinges medium weight of size 100 mm complete all as specified and as directed. |
| 133 | Supply and fix aluminium anodised barrel tower bolts of extruded section, 150 mm long all complete all as specified and as directed. |
| 134 | Supply and fix aluminium anodised cast type handles 150mm long complete all as specified and as directed. |
| 135 | Supply and fix aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long complete all as specified and as directed. |
| 136 | Supply and fix in repair door stopper of rubber and aluminium alloy body, 150 mm size complete all as specified and as directed. |
| 137 | Supply and fix in repair floor door stopper of aluminium body and tongue over all length 140 mm aluminium with hard drawn steel spring complete all as specified and as directed. |
| 138 | Supply and fix in repair Mortice lock, vertical type, size 100 mm aluminium with Lev- 4 Levers complete all as specified and as directed. |
| 139 | Supply and fix Aluminium (Extruded Section body) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed. |
| 140 | Dismantling of wall partical board and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 141 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural mm thick filler false ceiling tiles of Size 595 x 595mm 12mm thick of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 24 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) |
| 142 | i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 143 | Supply and fix fixing black / golden colour solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer complete all as specified and as directed. |
| 144 | Supply and fix venetian blinds, vertical type, 100 mm slot width of approved fabric and powder coated aluminium top rails etc complete all as specified, including dismantling old damaged one complete all as specified and as directed. NOTE :- The colour,design and shade shall be as approved by GE. |
| 145 | Supply and fix Roller blinds, horizontal type, 100 mm slot width of approved fabric and powder coated aluminium top rails etc complete all as specified, including dismantling old damaged one complete all as specified and as directed. NOTE :- The colour, design and shade shall be as approved by GE. |
| 146 | Dismantling of aluminium partition / windows / ventilators of any size and any description complete all as specified and as directed. |
| 147 | Supply and fix Anodised aluminium powder coated frame for doors window, partition and ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 148 | Supply and fix Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 149 | Supply and fix Anodised aluminium powder coated window and ventilators shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 150 | Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips etc complete all as specified and as directed. |
| 151 | Material and labour for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber / aluminium frame work in cup board shutters / aluminium partions including dismantling etc..complete all as specified and as directed. |
| 152 | Supply and fixing frosted glass on one side , 4.8 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square exc. 0.5 sqm in each pane complete all as specified and as directed. |
| 153 | Supply and fixing 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and as directed. |
| 154 | Supply and fixing 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed. |
| 155 | Supply and fixing in repairs 6.5mm thick aluminium grill of make \\"Deco grill\\" and DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel and fixed to windows/ ventilators including channel complete all as approved and directed. |
| 156 | Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed. |
| 157 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and as directed. |
| 158 | Supply and fix 1.25 mm thickness Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings including taking down old sheeting complete all as specified and as directed. |
| 159 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based profiled steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 160 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 161 | Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed. |
| 162 | Supply and fix, rolled mild steel as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 163 | Material and labour for applying two coats of synthetic enamel paint of approved shade on new or previously untreated steel surfaces exc. 10 cm in width or girth over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 164 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling old damaged one complete all as specified and as directed. |
| 165 | Material and labour for preparation of old wooden surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed. |
| 166 | Removing existing filler material including padding concrete from the joints, including cutting, chiselling or scraping;heating (if required); cleaning the joint surfaces free of all residue, dust, and loose particles; collecting and disposing of removed material in an approved manner; and preparing the jointfor installation of new joint sealant / filler in expansion joint complete all as specified and as directed. |
| 167 | Provide and apply one part low modulus gun grade elastomeric Polyurethane sealant NitosealPU 50 to the joints size maximum of 50 mm width x 25 mm depth over the polyethylene backer rods as bond breaker. The applied sealant shall be further covered with TPO membrane and terminated over the upstand / on the roof as per manufacturer specification. The cured sealant shall have a properties of MAF 50%,UV Resistance and service temperature range -40°Cto 70° C. Nitoseal PU 50 confirms to the standard compliance of ISO11600:2002 Type F 25LM,ASTM C920-95 Type S, Grade NS, Class 25, US Fed Spec TT-S-00230a Type II, Grade NS, Class25application instruction shall be strictly follow as per manufacturer's instruction complete all as specified and as directed. |
| 168 | Supplying and providing FPO based waterproofing tape with specifically formulated single-ply of width 150mm, thickness 1mm membrane fixed at both ends using epoxy bonding adhesive and laid loosely at middle in the expansion joint. Waterproofing tape to be anchored using epoxy adhesive for a width of 75mm on either side of the joint and leaving 50mm in the centre for allowing necessary movements. The tape shall be protected with metal cover plaster on the top of floor finishing or tiles over the terrace slab to avoid punctures to the waterproofing tape which shall be paid separately. The waterproofing tape shall have a density of 0.95 g/cum,Tensile Strength- 12.5 N/sqmm, Elongation at break- 400%.Product Approved:TPO Tapes: Expoband One Adhesive: NItobond PC40 complete all as specified and as directed. |
| 169 | Providing and applying HS TPO Membrane of 1.2mm thick over the layer of 200 gsm Geo-Textile with overlap joints of 75mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with termination strip and fix it by screw at 300mm c/c and sealed with HS Joint seal PU on top including surface preparation like remove all loose gravels, dirt, oil, grease and other foreign particle by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO completely as per specification and direction. |
| 170 | Material and labour for Cutting V grooves 15mm X 15mm in existing roof or terrace and cleaning out and Injecting Epoxy into Overhead Cracks /making good with epoxy based compound NITOMARTAR PE of FOSROC chemicals complete all as specified and as directed. |
| 171 | Material and labour for rendering 10 mm thick over roof concrete surface in CM 1:3 and finishing the surface even and smooth without using extra cement with water proofing compound complete all as specified and as directed. NOTE :-WPC shall be measured and paid separately. |
| 172 | Supply only integral water proofing compound all as specified |
| 173 | Taking down of ACs after gas back, including braking of foundation base and prepare new PCC base 1:2:4 size 800mm X 800mm x 75mm thick after treatment of roof including refixing of ACs, servicing, brazing and top up of refrigerant complete functioning and testing complete all as specified and as directed. |
| 174 | Removing of aluminium strip and re-fixing the same on PCC block including fixing of new saddles complete all as specified and as directed. NOTE :- PCC block paid separately. |
| 175 | Material and labour for filling the gap between PVC pipe and core cut with Pidigrout 10M of Dr. Fixit/Fosroc/sika or equivalent including shuttering the gap bottom with backer rod or with suitable material. Apply a coat of waterproof coat and place correct dimension comb cut piece of 60GSM geotextile fleece and place it across pipe and saturate it with waterproof chemical. Place another 60GSM geotextile fleece cut in flower pattern and placing at comb cut fleece and ensure to saturate the geotextile fleece with waterproof chemical. The gap between the pipes / sleeves / bore and RCC shall be free from dust, laitance, oil and water using compressed air or by mechanical measures. All Pipes to be placed/inserted in the core cut areas shall be aligned properly prior to bore packing. Cleaning / Roughening the inside surface of the bore hole and PVC Pipe outer area. Pipes to be inserted in the core cut areas with effective leak-free shuttering system. The pipe to be inserted, appropriately roughening with hacksaw-blade, applying a coat of Epoxy bonding agent of Dr. Fixit /Fosroc / sika or equivalent and sprinkle the quartz sand / fine sand and allow to dry for 6 hrs, complete all as specified and as directed for following sizes:- |
| 176 | (i) 75 mm Dia |
| 177 | (ii) 110 mm Dia |
| 178 | (iii) 160 mm Dia |
| 179 | Disconnecting / refixing existing tanks exc. 250 and n.exc 500 ltrs setting aside (or lowering if required) for repairs cleaning etc. complete all as specified and as directed. |
| 180 | All as per Ser item No 174.00 above but exc. 500 and n.exc 1000 ltrs |
| 181 | All as per Ser item No 174.00 above but exc 1000 and n.exc. 2000 ltrs |
| 182 | Removal of debris exc. 14 KM but not exc 15 KM out side MD land and depositing where directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender