|
| 1 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed. |
| 2 | M&L for Rendering 15 mm thick rendering on roof surface including flashings and junction of parapets etc, finished even and smooth in cement mortar (1:4), using water proofing compound 200 ml each cement bag (50 Kg) after brushing cement slurry including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc and including removing & taking out of roof treatment membrane etccomplete all as specified and directed. |
| 3 | Supply only Liquid water proofing compound |
| 4 | Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed. |
| 5 | Material & labour for cleaning of concrete of plastered surface of roof and applying priming coat using with bituminous primer @ 0.30Kg per Sqm followed evenly by a tack coat @ 1.20 Kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160gm per sqm) unrolled & bonded to substrate with side and end lapse 75mm and 100mm as per manufactures instructions and applying over it of tack coat using 85/25 grade industrial hot blown between @ 1.20Kg per Sqm and finally finish the top by providing PCC tiles of size (200x200mm) and (20-22mm) thick machine made laid on 10mm thick screed bed in cement mortar. The joint of the tiles shall be grouted and flush pointed with cement mortar 1:3 complete all as specified and directed. |
| 6 | M & L for sunken slab treatment comprising of the following : (a) Taking out / down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of rubbish from the site of work to a distance n. exc. 250m complete all as specified and directed. (b) Material and labour for 25mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) over cleaned surfaces (c) Material and labour 10mm thick rendering in CM (1:4) with liquid water proofing compound (WPC) @ 200ml per 50 Kg of cement consumed or as per manufacturer's instruction to sides and bottom of sunken slab (d) M & L for applying to sides and bottom of sunken slab bituminous primer @ 0.30 Kg/ Sqm over plastered surface and applying bitumen of grade 85/25 over primed surface @ 1.20 Kg/Sqm and laying APP based polymeric water proofing membrane 3mm thick of weight not less than 3 Kg/Sqm with 100mm overlap and sealed with hot flame. complete all as specified and directed. |
| 7 | Cleaning and clearing vegetation, debries from roof top, chajja etc. and disposal of the same to a distance n.exc 100 metre complete all as specified and directed. |
| 8 | Material and labour for racking out joints in brick tiles laid flat in roof etc and including flush pointing in CM (1:3) complete all as specified & directed. |
| 9 | M&L for repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. complete all as specified and directed. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Necessary Forwork and reiforcement required at the site will be supplied and fixed by the contractor and the cost of these are deemed to be included in the rates quoted by the contractor and contractor have to inform the department one day in advance after binding the reinforcement otherwise no payment will be considered on this account) |
| 10 | M&L for Rendering 15 mm thick in cement mortar (1:4) on bricks or concrete surface, finished even and smooth complete all as specified and directed including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc |
| 11 | Material and labour for 12 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth complete all as specified and directed including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc |
| 12 | M&L for rendering 10 mm thick on brick or concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:4), complete all as specified and directed including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc |
| 13 | M&L for Two coats of cement base paint over a coat of primer white or tinted on new plastered surfaces of walls and applying 1mm thick wall care putty on wall including prepration of surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. of drops and splashes complete all as specified and directed .(Note- cement base paint shall be applied through using automatic airless spray gun and through applicator) |
| 14 | M&L for preparation of newly plastered surface of wall etc and applying 1mm thick wall care putty and two coat of oil bound distemper (OBD) over one coat of primer complete all as specified and directed (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 15 | M&L for preparation of newly plastered surface of ceiling etc and applying 1mm thick wall care putty and two coat of white wash) over one coat of primer complete all as specified. and directed (Note- white wash shall be applied through roller and through applicator) |
| 16 | M&L for complete removal of exisitng treatment on old internal wall surfaces by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on all surfaces and then applying two coat of oil bound distemper. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 17 | M& L for Preparation of existing walls and applying one coat of oil bound distemper incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on walls including Washing, rubbing down and stopping of distempered, painted surfaces on walls all as specified and directed (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 18 | M&L for preparation of plastered or un-plastered old surfaces of ceiling and applying one coats of white wash incl repair work like putty, plaster and preparation of required area complete all as specified & directed. (Note- white wash shall be applied through roller and through applicator) |
| 19 | Material & Labour for Washing, rubbing down the wall surfaces and applying one coat of cement base paint incl repair work like putty, plaster and preparation of required area with primer or extra coat of cement base paint to merge with existing area of cement base paint as per requrement on walls complete all as specified and directed. (Note- cement base paint shall be applied through using automatic airless spray gun and through applicator) |
| 20 | Material & Labour for Washing, rubbing down the wall surfaces and applying one coat of Apex weather proof incl repair work like putty, plaster and preparation of required area with primer or extra coat of cement base paint to merge with existing area of cement base paint as per requrement on walls complete all as specified and directed. (Note- The Apex shall be applied through using automatic airless spray gun and through applicator) |
| 21 | M&L for preparation old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 22 | M&L for preparation of old or previously untreated steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed. |
| 23 | M&L for Cleaning water tanks 500 ltrs and date of cleaning write down on the tank ( in white paint ) including the removing and refixing the tank and fitted with new union as required and repair work to stop leakage of water or damages occured during removing or refixing the tanks complete as directed by Engr-in-charge. |
| 24 | M&L for Cleaning water tanks 1000 ltrs and date of cleaning write down on the tank ( in white paint ) including the removing and refixing the tank and fitted with new union as required and repair work to stop leakage of water or damages occured during removing or refixing the tanks complete as directed by Engr-in-charge. |
| 25 | Supply & fix in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed. |
| 26 | Supply & fix in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 25mm bore complete all as specified & directed. |
| 27 | S&F three layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks & removing to store. |
| 28 | S&F three layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity including Dismantling old existing water tanks & removing to store. |
| 29 | Disconnecting existing 500 Ltrs PVC tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified & directed. |
| 30 | Disconnecting existing 1000 Ltrs PVC tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & directed.(Cleaning repairing, etc. measured separately) |
| 31 | Supply and fixing in repair tank lid/cover made out with 0.63mm thick PGI sheet, 470mm dia or suitable for fixing in water tank of capacity 500/1000 Ltrs including 4 side fastening arrengement with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheet to protect by monkey menance complete as per as per sample , complete all as directed by Engr-in-Charge. |
| 32 | S&F for False ceiling with 4 mm thick E board white prelaminated, set embossed reinforced designer ceiling board of oceanic texture fixed over and including powder coated galvanised iron grid frame work of size not more than 600x600 mm having 25mm wide T-section runner made of 0.33mm GI sheet and angle made 0.45mm thick GI sheet suspended with and including 2 mm dia GI wire and leveling clips . (Note: All exposed surface of grid shall be powdered coated white) including dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets.complete all as specified & directed. |
| 33 | S&F for 6 mm thick PVC Wall Lining of hollow section consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 1 mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of PVC wall PVC Dismantling of boarding, any description, fixed in any position with nails complete all as specified & directed. |
| 34 | M&L for 6mm thick Fiber cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts including dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets including ridges in roof coverings complete all as specified & directed. |
| 35 | M&L for in repair Fibre cement two piece adjustable serrated ridge, 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified & directed. |
| 36 | Supplied and fixed pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets including ridges in roof coverings complete all as specified, directed and as per manufacturer's instructions. |
| 37 | Supplied and fixed pre-painted plain galvanised coating GI based plain sheet 0.5mm thick of any colour as in roof covering / cladding / ridges, fixed with self tapping screws including dismantling complete all as specified and directed. |
| 38 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, all as sepcified and directed. |
| 39 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 40 | S & F MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats, wall anchor fastner etc (including fixing independently vertical post) conforming to (Fe- 410-W Gde E-250) complete all as specified and directed. |
| 41 | S&F MS flate iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 42 | Material and labour for brick work with burnt brick of straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 including demolition of brick, complete all as specified & directed. |
| 43 | M&L for Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6), including demolition of brick, complete all as specified and directed |
| 44 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as per specified and directed. |
| 45 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in sub base floor etc complete all as specified and directed |
| 46 | Material & labour for vitrified coloured tiles of size 1200x600 x thickness not less than 8 mm, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed. |
| 47 | Material & labour for vitrified coloured tiles of size 1200 x 600 x thickness not less than 8 mm, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 10mm thick rendering of CM (1:4) including Dismantling of old tiles complete all as specified & directed. |
| 48 | Material & labour for vitrified coloured tiles of size 600x600 x thickness not less than 8 mm, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed. |
| 49 | Material & labour for vitrified coloured tiles of size 600 x 600 x thickness not less than 8 mm, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 10mm thick rendering of CM (1:4) including Dismantling of old tiles complete all as specified & directed. |
| 50 | Material & labour for non skid coloured tiles of size 400x400 x 6-7mm thickness coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed. |
| 51 | M&L for glazed ceramic white tiles 600x300x 6 to7 mm thick/450x300x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:4 including Dismantling of old tiles complete all as specified and directed. |
| 52 | M&L for 75 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, including finished surfaces even and smooth without using extra cement complete all as specified and directed |
| 53 | M & L for in repair 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.complete all as specified and directed |
| 54 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.complete all as specified and directed |
| 55 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.complete all as specified and directed |
| 56 | S & F 110mm bore PVC (SWR) bends With acces door any radius.complete all as specified and directed |
| 57 | S & F 75mm bore PVC (SWR) bends with access door any radius complete all as specified and directed. |
| 58 | S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.complete all as specified and directed |
| 59 | S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.complete all as specified and directed |
| 60 | S&F in repair 32 mm bore pvc spout drain pipe for drain out the percolation water including connected items below the floor tile, to extend pipe to ground level, including clamps out of any size flat iron and round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 61 | Material &Labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.complete all as specified and directed |
| 62 | Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing and including taking up or down complete all as specified & directed. |
| 63 | Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings and including taking up or down complete all as specified. complete all as specified and directed |
| 64 | Taking up or down steel tubing & connections, including cleaning & Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore complete all as specified and directed |
| 65 | Taking up or down steel tubing & connections, including cleaning & Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 20mm bore complete all as specified and directed |
| 66 | S&f in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 67 | S & F in repair 15mm Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE |
| 68 | S & F in repair 15mm two way Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE |
| 69 | S & F 15mm Chromium plated , fancy type, stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair approved by GE |
| 70 | S&F in repair brass spindle of No 2 / 3 / 4 or die 5 No for CP pillar tap / bib taps / angle cock. All as directed by Engineer-in-Charge. |
| 71 | S&F in repair cast copper alloy spindle brass disc 3/4\\" for CP wall mixer, WHB mixer and sink mixer pillar tap / bib taps / angle cock, etc suitable for MAP Accn or other Accn. complete all as specified and directed |
| 72 | S&F in repair Legs for CP brass mixer (S alphabat shape)suitable for Wall mixer/sink mixer etc screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe All as directed by Engineer-in-Charge. |
| 73 | S&F in repairs PVC waste pipe 32/40 mm bore as WHB/Sink etc complete all asspecified and directed |
| 74 | S&F in repair brass choromium plated extension nipple of size 25 to 50 mm for CP bib taps/angle cock etc complete all as specified and directed. |
| 75 | Supply and fixing in repair plastic water closet seat cover white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed by Engineer-in-Charge. |
| 76 | Supply & fix in repair brass chromium plated wall mixer suitable for telephonic shower/ overhead shower with long bend pipe complete all as specified & directed. |
| 77 | Supply & fix in repair 15mm dia single lever one hole basin mixer of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed all as specified and directed. |
| 78 | S&F in repair 15 mm dia brass chromium plated central hole sink mixer, swan neck, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.complete all as specified and directed. |
| 79 | S&F in repair single lever swan neck sink cock with swinging spout (Wall mounted model).chromium plate fancy type cast copper alloy screwed down complete all as specified and directed. |
| 80 | Supply and fixing in repair jet assembly with connecting rod suitable for European type WC suitable for 15mm dia pipe.complete all as specified and directed. |
| 81 | S & F in repair for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe Cat Part No.CERA F8030301.complete all as specified and directed. |
| 82 | Supply and fix as in repair 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and directed. |
| 83 | Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor, fixed as in repair. complete all as specified and directed. |
| 84 | Material and labour for rectifying the leakage of bib taps/stop cock/angle valve/pillar taps/angle cock by replacing rubber /PVC washer of required size complete all as specified and directed by Engr-in-Charge |
| 85 | Material and labour for rectifying the leakage of wall mixer/wash basin mixer/sink mixer of any type by replacing rubber /PVC washer of required size complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface.complete all as specified and directed. |
| 87 | S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white excluding (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. |
| 88 | S&F in repair Rimless Vitreous China single pies WC with PP soft close slim seat cover, higes incl dual flush cistern and all fitting fixing accessory, white complete all as specified and directed by Engr-in-Charge. |
| 89 | S & F in repair brass chromium plated fancy type shower rose square type size 100 x 100mm with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed. |
| 90 | Supply and fixing in repair towel rail of brass chromium plated 600mm long with and including chromium plated brass screws wooden / plastic cleats approved by GE |
| 91 | S&F in repair Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge. complete all as specified and directed . |
| 92 | S&F in repair CP brass soap dish complete all as specified and directed . |
| 93 | S&f in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 94 | Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed. |
| 95 | S&F in repair Anten backlit LED light fancy type bathroom looking mirror size 900mm x 600 mm of selected quality glass, anti fog, mounted on wall fixed with CP brass screws and cupwashers fitted as per equired at site complete all as specified and directed . |
| 96 | S&F in repair for 900mm x 600 mm beveled edge mirror of selected quality glass mounted on wall on 8mm thick plain edge smooth finished with CP brass screws and cupwashers fitted as per equired at site complete all as specified and directed Please Enable Macros to View BoQ information |
