|
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed by Engr-in-Charge. |
| 2 | M & L for brick work with old size fly ash bricks, straight or covered or plan exc 6m mean radius built in CM 1:6, complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for Taking down cement plaster from ceilings & brick walls including wall tiles / terrazzo / kota stone etc. any type of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.Note :- WPC shall be measured and paid separately. |
| 5 | M&L for Rendering 15mm thick in cement mortar 1:6 on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for 10 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 7 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engr-in-Charge. |
| 8 | Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engr-in-Charge. |
| 9 | Preparation of new plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed by Engr-in-Charge. |
| 10 | M & L for preparation of newly plastered surfaces of walls etc, and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and distempering walls with 2 coats of distemper oil emulsion, complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for preparation of old painted steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge. |
| 13 | Demolition of concrete in roof, floors, other than ground floors beams, stairs, landings, chajjas, sunken areas and similar work, complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L Providing, cement concrete Type B0 1:2:4 (12.5 mm aggregate) in roof padding laid over chicken wire mesh of size 24 SWG/ roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed by Engr-in-Charge. |
| 15 | Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for Roof Treatment as follows, complete all specified below and as directed by Engr-in-Charge :-(a) Cleaning, washing of surface and removing all existing bitumen coatings/ APP membrane completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease.(b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars.(c) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water)(d) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls.(e) Applying three coat of HydroShield PUD microfibre reinforced UV resistent polyurethane (solid content 68% ) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls.(f) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer.Note :-(i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment . |
| 17 | M&L for Rendering 10 mm thick in cement plaster 1:4 with WPC on roof, fair faces of brick work or concrete surfaces, complete all as specified and directed by Engr-in-Charge.Note :- WPC shall be measured and paid separately |
| 18 | Supply only liquid water proofing compound, complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for Machine cut kota stone slab in flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 20 mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified and directed by Engr-in-Charge. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L plain cement concrete 1:2:4 type B-0, 25 mm thick using 12.5 mm graded stone aggregates as in flooring, sub base and base layer etc, complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F Premium quality glazed ceramic tile of size 450mm x 300mm thickness 7mm, water absorption between 10% to 20% pasted with spacer, tile adhesive and epoxy grouted with same make as of tile Make Glosstra series of Samany or equivalent in Johnson/Kajaria over including 15 mm thick rendereing CM (1:4) and poined in white or colour cement to match, complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repair Premium quality non-skid ceramic tile of size 400mm x 400mm, thickness of 7 to 8mm pasted with tile adhesive and epoxy grouted and water absorption of the tile should be between 3% to 6%, complete all as specified and directed by Engr-in-Charge. |
| 24 | Taking up or down 15/20mm dia GI/PVC Tubing and connection including, cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-Charge. |
| 25 | Supplying and laying of CPVC pipes ISI SDR 11 pipe 20mm dia with all fittings solvent and fixed to wall and Ceiling or laid in floor, bore of pipe 20mm, complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like duraplast seat cover, rag bolts/ gel gasket etc and ABS health faucet CP jet spray with 1.50 mtr long fexible tube including fixing arrangement, complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F in repair one piece/Single body PVC blow moulded conceled cistern, pneumatic type; capacity 9-10 litres, including chrome finish dual flush control plate, flushing pipe and fixing brackets, complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size, complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe, complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with wooden beading french polished, etc.complete fixed in position, complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F in repair 15mm dia angle valve,fancy type ,cast copper alloy, chromium plated, concealed type with long shank and cup with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F in repair bib tap,fancy type ,chromium plated, with crutch or butter fly handle, screwed down, screwed for 15mm bore pipe & fixed, complete all as specified and directed by Engr-in-Charge. |
| 34 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; confirming to Fe-290 Gde E 165 also fastening and fixing, complete all as specified and directed by Engr-in-Charge. |
| 35 | Taking down of chowkats or frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames), complete all as specified and directed by Engr-in-Charge. |
| 36 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed by Engr-in-Charge. |
| 37 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed by Engr-in-Charge. |
| 38 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F 100 mm long butt hinges, medium weight, cold rolled, mild steel, complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F 150 mm long Aluminium handles cast type anodised, complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasps staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy, complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F Aluminium shutters for window / ventilator (glazed and gauzed both),side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No), tower bolt 150 mm long (02 Nos) in each shutter if req with powder coating of any colour (thickness of powder coating not less than 50micron) etc, complete all as specified and directed by Engr-in-Charge.Note:- The Glass and wiremesh shall be measured and paid seperately. |
| 45 | M & L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish, complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L in repair 4 mm thick, plain sheet glass ordinary quality and glazing with oil putty or with wooden beads in squares n.exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L 5.5 mm thick, frosted sheet glass ordinary quality and glazing with oil putty or with wooden beads in squares n.exc 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge. |
| 48 | Dismantling of plain or corrugated steel/fibre glass sheeting, any gauge in roof covering, complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 50 | M&L for dismantling structural steel work including doors,gates, framed work etc, complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates conforming to Fe-290(Gde-E-165), complete all as specified and directed by Engr-in-Charge. |
| 52 | M&L Granite of any type machine cut 20mm thick, set and jointed in cement slurry over & including screed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing & with adhesive, complete all as specified and directed by Engr-in-Charge. |
| 53 | M & L for Marble work 18 to 20mm thick of any shade (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 1:6 CM, 20 mm screed bed, complete all as specified and directed by Engr-in-Charge. |
| 54 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc for the following points, complete all as specified and directed by Engr-in-Charge:- |
| 55 | One light / ceiling fan / exhaust fan controlled by one switch |
| 56 | All as per Srl item No 54.00 above but with 2.5 sqmm wire One 6A socket point controlled by one switch on independent board |
| 57 | All as per Srl item No 54.00 above but with 2.5 sqmm wire One 6A socket point controlled by one switch on same board |
| 58 | All as per Srl item No.54.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. Please Enable Macros to View BoQ information |
| 59 | All as per Srl item No.54.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. Please Enable Macros to View BoQ information |
