Tender For Construction Of 6 Nos Rooms At Govt High School Kotli Tanda Akhnoor ( Hs To Hss) Jammu Under Samagra
Tender Value
1.05 Crore
Estimated cost
Bid Submission
16 Jul 2026
4 days left
EMD
2.10 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 6 Nos Rooms At Govt High School Kotli Tanda Akhnoor ( Hs To Hss) Jammu Under Samagra
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by MECHANICAL means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils . |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:5:10) grade, with 40mm nominal size of aggregates. Crushed |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in 1:1.5:3 (1 cement:1.5 coarse sand: 3 graded stone aggreate 20mm nominal size in suspended floors, balconies,landings and staircase having upto 15 degree slope excluding cost of centering and shuttering.All work upto floor V level. |
| 6 | \\"Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen\\"\\"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)\\" |
| 7 | Reinforcement for RCC work including straightening ting,bending,placing in position & binding all complete with TMT bars. |
| 8 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means) |
| 9 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 10 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Angle 40x40x6mm |
| 11 | Centring and Shuttering including strutting, propping etc and removal of form work for foundation , footings , basis of columns etc. for mass concrete. |
| 12 | Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams ,plinth beams ,girders,bressumers and centilevers. |
| 13 | Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform |
| 14 | Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Postsand Struts. |
| 15 | Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls under 20 cm wide |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 17 | supplying and filling in plinth with fine sand under floors including watering ramming consolidating and dressing complete |
| 18 | Supplying and filling RBM including watewring, ramming,dressing and carriage lead and lift complete job |
| 19 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 20 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1:4 |
| 21 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding 10 mm square bar 4\\" c/c |
| 22 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.First class kail wood |
| 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick Second class kail wood |
| 24 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 25 | Providing and laying 75MM thick bed of dry brick aggregate 40 mm thick nominal size including spreading, well rammed, consolidated and grouted with fine sand including finishing smooth etc. complete as per direction of engineer incharge. Code No - 17.81 |
| 26 | 6mm ceemnt plaster to ceiling pf mix 1:3(1 cement 3 fine sand) |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in-cluding priming coat with cement primer Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 28 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied |
| 29 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New wood work (two or more coats) |
| 30 | Providing and fixing electic point complete in all respects as per directions of Engineer incharge |
| 31 | Engagement of painter for writing school name |
| 32 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm ) |
| 33 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 34 | Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 |
| 35 | i. Sliding door bolts (300 x 16mm) |
| 36 | iii tower bolt150x10mm |
| 37 | v handle 125mm |
| 38 | vi hooks & eyes |
| 39 | vii Twin rubber stopper |
| 40 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Single socketed pipes 110 mm diameter. |
| 41 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm bend |
| 42 | Steel work welded in built up sections/framed workincluding cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer using structuralsteel etc. as required In gratings, frames, guard bar, ladders,railings, brackets, gates & similar works |
| 43 | railing |
| 44 | providing and fixing of foundation stone |
| 45 | It should be noted that the bidding contractor should get the structural drawings duly vetted from the recognized Govt. Insttitute viz NIT/GCET/DIQC/IIT before starting the work and soil testing report |
| 46 | Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. Sand lead up to 10 kms. |
| 47 | Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. Stone aggregate below 40 mm lead up to 10 kms. |
| 48 | Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. BrickS. 20 KMS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender