|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | Providing and laying of cement concrete (1:5:10) using 40mm nominal size nallah stone. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (one cement: Two coarse sand: Four Graded stone aggregate 20 mm nominal in size) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up-to plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns |
| 6 | 12 mm cement plaster to plinth wall of mix 1 : 6 (1 cement : 6 fine sand) |
| 7 | Providing and laying river bed material / good earth including loading unloading and watering after every layer of 30 cm. The rolling is to be done by hand rammer. The rate includes supply and carriages and all forms of taxes. |
| 8 | Steel work welded in built up section/ framed work including cutting, hosting, applying a priming coat using structural steel. In gratings, frames, guard bard, ladders, railings etc. trusses including primer and enamel paint including nut bolts, kingpost, struts etc. |
| 9 | Supply and installation of Prefabricated PUF (Poly-Urethane Foam) Fire proof Panels for walls (PPGI finish on both sides) Panels of size 60 mm thick for walls (PPGI finish on both sides) and 60 /80 mm thick Fire proof PUF Panels (PPGI finish on both sides) for Roof to make a closed structure on the outer frame. Wall to wall cam/ male-female locking system including Internal flashing and External flashing to be provided. Prefabricated Sandwich panels with fasteners fitted and self-locking PVC gaskets fitted on all sides of wall including rivets, flashing, Anchor fastener, self drilling screw and all other allied accessories required for the installation/erection of panels. Job includes Cladding on all walls including sunshade on all windows and outer doors. |
| 10 | Fabrication, Providing and Fitting of Aluminum doors, windows and ventilators with frame made out of Powdered coated aluminum of gauge not more than 12 mm including glass, rubber beading, aluminum Fly mesh, aluminum sheet panels for doors and other allied accessories. The total no. quantity of doors and windows are enclosed as per attached drawing. The color and final design is as approved by Engineer in charge |
| 11 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 12 | 15 mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 13 | Providing and fixing gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels(Area of slab over 0.5 sqm) |
| 14 | Providing and laying vitrified floor and wall tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)I including grouting the joints with white cement and matching pigments etc. complete. |
| 15 | Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) T- sections35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia. M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of primer and paint as per Direction of Engineer Incharge . |
| 16 | Providing and fitting of following sanitary items in one no. bathroom and Kitchen to make them fully functional. Job includes P/F of 1 no. English Seat with all accessories, 1 no. urinal pot with all accessories, 1 no. wash basin of size not less than 18” with all accessories, 1 no. steel sink of size 24”, 1 no. looking mirror of appropriate size, 01 no Towel rods, Soap holders, Bib cocks, pillar cock, angle valves, PVC pipe waste pipe, Pvc connections and all other accessories.Providing and laying underground PVC pipe of size 150 mm of reputed make for sewage from bathroom to soakage pit and 75 mm PVC pipe for urinal, wash basin and kitchen sink. Providing and laying of CPVC pipe of requisite sizes for water supply to the bathroom and Kitchen from main source along with all allied fitting and accessories. Job also includes construction of main holes, PVC cover at the top of the main/check hole, 02 Nos. cement circular soakage septic tank of size 3ft dia and depth of 8ft with lid/cover with provision of their interconnections, fitting of gas pipe along with connections with the bathroom to make bathroom fully functional with all other allied accessories. |
| 17 | P/F of 1 no P.V.C water storage tank of capacity 1000 ltrs and 01 no. 0.5 Hp water pump with motor along with all allied accessories and connections. Job also includes UPVC plumbing connections of motor with the water source for lifting the water to PVC tank along with all allied accessories and fittings. The job is inclusive of all material cost, labour cost and taxes. |
| 18 | Electrification of the hut by way of Providing and fitting of 08 nos. round recess/ surface 20 watt LEDs, 04 nos 4 feet LED tube lights, 2 nos ceiling fans with regulator of 1200 mm sweep, 2 nos exhaust fans of 12” dia with lovers, 02 nos. 100 W LED Flood Light. Providing and fitting of 1 no. distribution panel consisting of MCCBs/MCBs/SPNs for different circuits. Providing and laying of main service line of size 16 sq. mm 2 core from main electricity source to MCB/distribution box and 1 sq. mm/1.5 sq mm./2.5 sq.mm wire/4 sq.mm wire for different power circuits. P/F of modular switches, sockets, pvc conduit pipes of different sizes as per site requirement. The job includes material cost ,labour cost and taxes Please Enable Macros to View BoQ information |
