Tender For Repair And Maintenance At Corporate Office Of Rsmml, Udaipur
Tender Value
9 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
18000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance At Corporate Office Of Rsmml, Udaipur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jul-2026 | corrigendum 1 | Date | 05-Aug-2026 |
| 2 | 06-Aug-2026 | corrigendum 2 | Date | 12-Aug-2026 |
| 3 | 14-Aug-2026 | corrigendum 3 | Date | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : Two or more coats on new work including preparation of base with primer,putty,lippy etc.complete in all respect. (12.40/12.40.1/145) |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture to giv an even shade: Two or more coats on new work (12.46/12.46.1/146) |
| 3 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead with cement mortar 1:4 (1 cement:4 coarse sand) (13.1/150) |
| 4 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mmAdd extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar.(7.18/7.18.2/7.19/87) |
| 5 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).Size 600mm x 1200mm(7.20/7.20.1/87) |
| 6 | P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc completeSize 300mm x 450mm(7.22/7.22.2/88) |
| 7 | Providing and fixing Marble stone flooring table rubbed,15-18 mm thick over 20mm(Av.)thick base of CM 1:4 (1cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement:2 marble dust)with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. OR Providing and fixing stone slab table rubbed,15-18 mm thick in Walls, Steps, Pillars,Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.)thick base of CM 1:3 (1cement :3coarse sand) jointing with white cement mortar1:2 (1whitecement : 2marbledust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing completeKeseriaji/ Abu Ambaji (Green Marble)1501 Cm2 to 3600 Cm2 Tiles(7.1/7.3/7.3.2/83) |
| 8 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble workHalf Edge moulding(7.6/7.6.1(ii)/85) |
| 9 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor(1.3/217) |
| 10 | P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 Marked) grade-1 white for EWC(1.7/1.7.2/218) |
| 11 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231 .(1.20/1.20.2/219) |
| 12 | Labour charges for removing W.C.pan(anytype )of all sizes with care including all necessary fittings P or S trap.(1.9/218) |
| 13 | P &FJet spray for water closet with C.P. Copper Tube flange of approved make.(1.59/226) |
| 14 | P & F Grating of approved quality/make:Stainless Steel Sheet size 125mmdia. Heavy Quality of approved make (1.48/1.48.2/224) |
| 15 | Providing & Fixing premium qulaity WVC Urinal with PVC waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (large) or half stall size 590x375x390 mm.(1.69/1.69.2/227) |
| 16 | Providing & Fixing premium qulaity WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make with PVC waste pipe completeSize 550 mm x 400 mm(1.71/1.71.1/227) |
| 17 | P&FBib Cock (IS : 8931Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore.(2.7/2.7.3/232) |
| 18 | P & F Pilllar Cocks(IS:8931:1993Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore(2.6/2.6.1/231) |
| 19 | P & F Inlet Connection (AngleValves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked)(2.12/2.12.1/233) |
| 20 | P & F 15 mm.Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 450mm(2.13/2.13.7/233) |
| 21 | PVC pipe with C.P. Brass nuts upto length, 600mm(2.13/2.13.8/233) |
| 22 | PVC pipe with C.P. Brass nuts upto length, 300mm(2.13/2.13.1/233) |
| 23 | P & F Full-way Valve (IS:778Mark) or wheel valve of approved make :Gun-metal 25mm nominal bore.(2.15/2.15.3/233) |
| 24 | P &FLooking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-chargeSize 500x400mm(1.45/1.45.1/223) |
| 25 | P & F G.I. pipes (Internal Work)with G.I.Fittings excluding union (IS:1239Mark) & MS clamps including cutting and making good the walls and floorsConcealed pipe in wall including painting with anticorrosive bitumen paint15 mm dia nominal bore'B' Class(2.1/2.1.9/230) |
| 26 | 25 mm dia nominal bore'B' Class(2.1/2.1.11/2.1.11.2/230) |
| 27 | Providing & Fixing premium quality W.V.C. Urinal Partition plate of size 630x315 mm(1.70/227) |
| 28 | P & F rigid PVC Pipe (IS:4985 mark) class II/ (4Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.75 mm dia(3.16/3.16.2/247) |
| 29 | 110 mm dia(3.16/3.16.3/247) |
| 30 | 160 mm dia(3.16/3.16.4/247) |
| 31 | P & F rigid PVC pipe fittings (IS: 4985mark) of approved quality/make including joining the pipe with solvent cement rubber ring and lubricant:Plain Tee75mm dia(3.17/3.17.3/(i)/248 |
| 32 | 110mm dia(3.17/3.17.3/(ii)/248 |
| 33 | Bend 87 .575mm dia(3.17/3.17.9/(i)/248 |
| 34 | 110mm dia(3.17/3.17.9/(ii)/248 |
| 35 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /makeNahni Trap with Jali 3” 75 mm dia(3.45/3.45.27/259) |
| 36 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar(14.7/14.7.3/156) |
| 37 | Providing and laying In position cement concrete including curing,compaction etc.complete in specified grade excluding the cost of centering and shuttering-All work upto plinth level.M15 grade Nominal Mix 1:2:4(1cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size).(3.1/3.1.2/54) |
| 38 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide(9.8/99) |
| 39 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.Welded mesh 25 mmx 25 mm x 2.1 mm(9.38/9.38.3/104) |
| 40 | Providing, hoisting and fixing up to floor five level precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia Mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand ) etc complete as per approved design excluding plastering of jambs, sills and soffits50mm thick(4.19/4.19.1/63) |
| 41 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :(10.22/109) |
| 42 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance(9.26/102) |
| 43 | P & F C.P.brass Urinal Spreader for stall urinal of approved make.(1.29.1/ 220) |
| 44 | Providing and fixing factory made of uPVC Extruded section having an overall dimension as below (tolerance+/-1mm) with wall thickness 2.0mm+/-0.2mm,corners of the door frame to be mitred and welded of plastic ,galvanized brackets and stain less steel screws.The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1mm+/-0.1mm wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge.Extruded section profile size 48x40 mm(16.16 / 16.16.1 / 178 ) |
| 45 | Providing and fixing to existing door frames 30mm thick factory made polyvinyl chloride (PVC) door shutter made of stiles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2mm +/- 0.2mm with inbuilt decorative moulding edging on one side. The stiles and rails mitred and joined and the corners by means of M.S.galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0mmand stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x20 mm and 1mm +/ 0.1mm wall thickness. The lock rail made up of „H‟ section, a uPVC hollow section of size 100x30 mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/galvanized M.S.tube „U‟ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 610mm,having overall thickness of 20mm and 1mm+/- 0.1mm wall thickness.The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers.complete as per manufacturer‟s specification and direction of Engineer-in-charge.(For W.C.and bathroom door shutter)(16.18 / 179 ) |
| 46 | ADD 4.50 % FOR MISCELLANEOUS WORK Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 12, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender