Tender For Construction Of Different Type Electrical Work For Releasing Of New Connection At Sub Station Ambedkar Univecity Under The Jurisdiction Of Se (Tec.) Amausi Zone Against Running Deposit Scheme 2026-27.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
50000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Different Type Electrical Work For Releasing Of New Connection At Sub Station Ambedkar Univecity Under The Jurisdiction Of Se (Tec.) Amausi Zone Against Running Deposit Scheme 2026-27.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jul-2026 | Date Extend 1 | Date | 13-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store. |
| 2 | a- Line Material |
| 3 | b- PCC Pole 8.5 Mtr. Long. |
| 4 | c- ST Pole 11/9 Mtr. Long |
| 5 | d- ACSR Wesal Conductor. |
| 6 | e- ABC 3x50/3x95/3x120 sq. mm. |
| 7 | f- ABC Single Phase |
| 8 | g- 11 KV XLPE Cable 3x70/3x120/3x185 sq. mm. |
| 9 | h- T/F 100 KVA |
| 10 | i- T/F 63 KVA |
| 11 | j- 25/16/10 KVA T/F |
| 12 | k- 250 KVA T/F |
| 13 | l- 11 KV Pilfer |
| 14 | m- 11 KV CT PT Unit |
| 15 | Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST/PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department. |
| 16 | Fabrication, erection of double pole for end terminations/sectional double pole, 11 KV line on ST/PCC Pole with fixing of necessary clamps & other accessories like 1 nos top channel 100x50 mm 2.24 m. 1 No. Guarding Angle. Its grouting in ratio 1:4:8 plinthing 300 mm above ground level, earthing of support & one side cable expose. |
| 17 | Dragging of ST/PCC Pole to pit site, diging of pit erection and grouting (As per RESPO Norms) of 11 KV line with fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Gaurding angle (1.8 mm 65x65x6) with Nut & bolts its ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department. |
| 18 | Dragging of ST/PCC Pole from Dump Store to pit site, diging of pit erection and grouting (As per RESPO Norms) of LT support suitable for laying of ABC Line on 8.5 Mtr Long PCC Pole by providing of necessary eye hook/Lt Shackle insulator with Clamps and its accessories etc. as per RESSPO Specification. Only Pole will be Provided by the Department. |
| 19 | Grouting & Nuzzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor. |
| 20 | Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor. |
| 21 | Laying Stringing & sagging of 3 Phase 3 wire 11 KV New Line on ACSR Wesel/Racoon conductor as per RESPO Specification and direction on E/I. All material except ACSR weasel/Racoon conductor shall be supplied by the contractor. |
| 22 | Guarding of HT line by GI wire. GI wire shall be supplied by the department. |
| 23 | Proper laying & commissioning of Single Phase XLPE Aerial Bunched Conductor. Only ABC Provided by deptt. |
| 24 | Proper laying & commissioning of (3x50/3x95/3x120 sq.mm) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt. |
| 25 | Fixing of Single/Three Phase distribution boxes/Kiosk on the LT poles including all clamps and material required for mounting connections & sealing. Only distribution box Shall be supplied by deptt. |
| 26 | Laying of 3X70/3x120/3x185 sq.mm 11 KV XLPE cable by drill method as per RESPO Norms. Only 11 KV XLPE cable supplied by Department. |
| 27 | Digging of pit suitable for 3x70x3x120/3X185 sq.mm 11 KV XLPE cable laying. After 11 KV XLPE cable laying refilling by Bricks & sand as Per RESPO Norms. Only 11 KV XLPE cable supplied by Department. |
| 28 | Cable Hosting of 11 KV 3x70/3x120/3x185 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor. |
| 29 | High pressure testing of 11 KV 3x70/3x120x3x185 XLPE cable along with arrangement of High-Pressure equipment. |
| 30 | Installation of 11 KV CT PT metering unit on constructed double pole structure as per RESPO Norms. Only 11 KV CT/PT unit shall be supplied by the Deptt. |
| 31 | Fixing of 11 KV Pilfer Resistance Meter (25/5 Amp). All material except Pilfer Resistance Metering Cubical shall be supplied by the contractor. |
| 32 | Well type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5\\" dia (\\"B\\" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor. |
| 33 | Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer. |
| 34 | Wire mess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. |
| 35 | Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm olng) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type Tailless Fuse Unit, 3 Nos coper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor. |
| 36 | Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor. |
| 37 | Fabrication, errection & commissioning of 100 KVA T/F on Double Pole with all accessories. All material except 100 KVA T/F shall be supplied by the Contractor. |
| 38 | Fabrication, errection & commissioning of 63 KVA T/F on Double Pole with all accessories. All material except 63 KVA T/F shall be supplied by the Contractor. |
| 39 | Fabrication, errection & commissioning of 25/16/10 KVA T/F on Double/Singel Pole with all accessories. All material except 25/16/10 KVA T/F shall be supplied by the Contractor. |
| 40 | Supply and fixing of 11 KV TPMO as per RESPO Norms. |
| 41 | Lopping & chopping of tree branches for clearance of HT/LT line. After clearance of line throughout pieces of tree branches of site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender