Tender For Comprehensive Annual Maintenance And Upkeeping Of Ecl Hq Campus Including Administrative Building, Technical Building, Sheetalpur Guest House, Cvo Office And Environment Office At Barachak For 730 Days Under Ecl Hq.
Tender Value
5.75 Crore
Estimated cost
Bid Submission
11 Jul 2026
2 days left
EMD
7.19 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Annual Maintenance And Upkeeping Of Ecl Hq Campus Including Administrative Building, Technical Building, Sheetalpur Guest House, Cvo Office And Environment Office At Barachak For 730 Days Under Ecl Hq.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Carriage of Materials By Mechanical Transport including loading,unloading and stacking: Lime, moorum, building rubbish Lead - 5 km |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 4 | P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 8 | Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to foor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) |
| 15 | P/F Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 17 | P/F ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 18 | P/F M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 19 | P/F fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 mm |
| 20 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 21 | P/F bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 22 | P/F aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 23 | P/F chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 24 | P/F aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 25 | P/F aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm |
| 26 | P/F aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 27 | P/F aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 28 | P/F wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50 mm (base and height) |
| 29 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 30 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 31 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 32 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weights not less than 10 kg/ sqm) |
| 33 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 34 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement |
| 35 | P/L Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm |
| 36 | P/L Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size Size of Tile 800 x 800 mm |
| 37 | P/L vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 38 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. |
| 39 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 40 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 41 | P/F on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 42 | P/F on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 43 | P/F on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm |
| 44 | P/F on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm |
| 45 | P/F on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 46 | P/F on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe |
| 47 | P/F on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend |
| 48 | P/F on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 49 | P/F unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 50 | P/F unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 75 mm |
| 51 | P/F false ceiling at all height including P/F of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 52 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 53 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 54 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 55 | Neat cement punning. |
| 56 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 57 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 58 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 59 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 60 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 61 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 62 | White washing with lime to give an even shade : Old work (two or more coats) |
| 63 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 64 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) |
| 65 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 66 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 67 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 69 | French spirit polishing : One or more coats on old work |
| 70 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
| 71 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 72 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 73 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats |
| 74 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory window |
| 75 | P/F brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter. |
| 76 | P/F brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. |
| 77 | P/F 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 78 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. Orissa pattern W.C Pan of size 580x440 mm |
| 79 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 80 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 81 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 82 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres |
| 83 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 84 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 85 | Brick edging in full brick width and half brick depth includingexcavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 |
| 86 | P/F white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clampscomplete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 87 | P/F wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require: White Vitreous China Wash basin size 630x450 mmwith a single 15 mm C.P. brass pillar tap |
| 88 | P/F Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm |
| 89 | P/F controlled flush, low level cistern made of vitreouschina with all fittings complete. 10 litre (full flush) capacity-white |
| 90 | P/F P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 91 | P/F 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
| 92 | P/F 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brassbrackets and guard rail complete fixed with 40 mm long screws, rawlplugs etc., complete. |
| 93 | Cutting chases in brick masonry walls for following diameter sandcast iron/centrifugally cast (spun) iron pipes and making good thesame with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6graded stone aggregate 12.5 mm nominal size), including necessaryplaster and pointing in cement mortar 1:4 (1 cement : 4 coarsesand) : 75 mm dia |
| 94 | P/F PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingsarrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not lessthan 190 gms. |
| 95 | P/F Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes |
| 96 | P/F Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 97 | P/F Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes |
| 98 | Making connection of G.I. distribution branch with G.I. main of following sizes by P/F tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 99 | P/F brass bib cock of approved quality : 15 mm nominal bore |
| 100 | P/F brass stop cock of approved quality : 15 mm nominal bore |
| 101 | P/F gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 102 | P/F gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore |
| 103 | P/F gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 104 | P/F uplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore |
| 105 | P/F G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore |
| 106 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 107 | P/F C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 108 | P/F C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 109 | P/F C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 110 | P/F C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 111 | P/F PTMT stop cock of approved quality and colour. Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms |
| 112 | P/F C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 113 | P/F aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 114 | P/F aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including P/F hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 115 | P/F 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 116 | P/F glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 117 | P/F Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 118 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 119 | Daily Dry and wet cleaning and sweeping of toilets, sanitary fixtures, like wash basin, WC pan (Indian type and Europian type) urinal stall toilet floor and walls up to dado level i.e. the glazed tiles fixed on the wall, cleaning of mirrors, pantry, staircase, common places, corridor, all rooms passages, cabinet, glass doors etc. complete |
| 120 | Cleaning of road side drains, back side drains connecting to back of all side and removal of earth, silt, slush, dirt and other refuses and the same should be removed by the next day and disposal upto the lead of 1 to 2 km, cleaning of drain to be done once in a week or in close interval when found necessary by the Engg-in-Charge. For entire CMD office complex, Personnel office complex & Barachak House Complex. |
| 121 | Brooming and cleaning of roads inside the HQ & Barachak House Complex daily i/c dressing of berms of road etc. as per instruction of Engg.-in-Charge. |
| 122 | Collection and disposal of conservancy garbage etc. collected at the side of the drain suitable places branches of trees i/c manual head transportation from the stack / dumps loading into the truck/ tracktors as per instruction of the Engg-in-Charge for entire CMD Complex, Personnel office Complex & Barachak House Complex. |
| 123 | Cleaning and desilting of septic tank including removal and refixing of cover slab, removal and disposal of the sludge with all lead as per instruction of EIC including hire charge & running cost of machinaries, labour etc all complete. |
| 124 | Cleaning of all types of roofs including removal of dry leaves, weedings & cleaning of drain holes, brooming etc. all complete with all tools & tackles & staking the garbage at specified place as per direction of In-charge. |
| 125 | Fogging with smoker mixed with diesel @ 8 ml smoker with one litre of diesel twice per month as per direction of Engineer-in-charge (treatment to be done using spray machine along with proper safety provisions for sprayer like mask etc). |
| 126 | General pest control with Malathion 50% EC and Nuvan 75% EC (2 ml Malathion & 6 ml Nuvan to be mixed with 1 litre water) for inddor as well as outdoor treatment once in a month as per direction of Engineer-in-charge. (Treatment to be done using spray machine along with proper safety provisions like mask etc.) |
| 127 | Day to day Upkeeping and maintenance of D(T)P&P sectt. and chamber at ECL HQ Sanctoria, for a period of 02 years.( minimum 01 no. manshift per day). |
| 128 | Upkeeping, maintenance & tea service in the room of D(T)P&P's Secretariat Tea Room Under ECL HQ (01 manshift minimum per day) for two years. |
| 129 | Upkeeping, maintenance & tea service in the room of D(T)OP Secretariat's Tea Room Under ECL HQ Sanctoria (01 manshift minimum per day) for two years. |
| 130 | Upkeeping, maintenance & tea service in the room of D(F)s Secretariat Tea Room Under ECL HQ (01 manshift minimum per day) for two years. |
| 131 | Misc. odd jobs and up-keeping of GANDHI UDDYAN AND SARDAR VALLABHBHAI PATEL VAN UDDYAN with day to day maintenance of surrouding drain at ECL HQ. (Minimum 02(two) man shifts is to be deployed per day ) for period of 02 (two) years |
| 132 | Book binding and record keeping(Day to day basis) work at finance department (Minimum 01 (one) Semiskilled manshift is to be deployed ) for period of 02 (two) years |
| 133 | Water supply, distribution and pump operation works at CMD office complex, Sanctoria hospital Complex. for period of 02 (two) years |
| 134 | Operation of Coal Jal / drinking water at different locations in CMD's office (Minimum 04 (four) manshift is to be deployed ) for period of 02 (two) years |
| 135 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick. |
| 136 | Supplying, fitting and fixing boiling water proof ply of or equivalent conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] 19.0 mm thick. |
| 137 | Supplying, fitting and fixing boiling water proof ply of or equivalent conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] 12.0 mm thick. |
| 138 | Supplying, fitting and fixing boiling water proof ply of or equivalent conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] 6.0 mm thick. |
| 139 | Supplying, fitting and fixing boiling water proof ply of or equivalent conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] 4.0 mm thick. |
| 140 | Supply of Hybrids seasonal flower plants in beds in summer and rainy season as per instruction of Engineer-in-charge. |
| 141 | Supply of Hybrids seasonal flower plants in beds in winter season like Daliha, Inka, Seed Daliha, French merigold, Thousand lady, Panzy,Pitunia,Popy,Salvia, Calandula,Aster,Antinum, Danthus,Verbina, Chandra Mollicka,Starck,Antinum,Gladiolus etc. as per instruction of Engineer-in-charge. |
| 142 | \\"Maintenance of old pre developed grass Lawn, Hedges, potted plants, plants in garden in all seasons including cutting, mowing, weeding, watering, manuring, replacing damaged part, leveling including tools, tackles consumable, labours, manure and pesticides etc. as required time to time, as per standard expertise so that during the contract period any time Lawn, hedges, plants should look healty well kept, well groomed, clean fresh and pleasing to eye. The scope of the work includes the following . (a) Maintenance of Seasonals flower Summer (b) Maintenance of Seasonals flower Winter (c) Maintenance of ordinary flower plants (d) Maintenance of Lawn (e) Maintenance of Hedges (f) Maintenance of potted plants. (g) Maintenance of decorative plants with minimum employment of 8 nos unskilled daily rated worker. |
| 143 | Supplying of Croton in the site |
| 144 | Supplying of Aralia in the site |
| 145 | Supplying of Tubic China in the site |
| 146 | Supplying of Lucky Bamboo (three layer) in the site |
| 147 | Supplying of Anthorium (peace lily) in the site |
| 148 | Supplying of Palm plant in the site |
| 149 | Supplying of Rose of different colours and variety in the site |
| 150 | Supplying of X-mass Tree in the site |
| 151 | Supplying of Thuja in the site |
| 152 | Supplying of Dracena in the site |
| 153 | Supplying of Jaba in the site |
| 154 | Supplying of Ordinary Hedge in the site |
| 155 | Supplying of Good quality Hedge in the site |
| 156 | Supplying of Special quality Hedge in the site |
| 157 | Supplying of Ordinary quality Hanging plants with pots in the site |
| 158 | Supplying of Special quality Hanging plants with pots in the site |
| 159 | Supplying of Ordinary quality Golden Juniperus in the site |
| 160 | Supplying of Superior quality Golden Juniperus in the site |
| 161 | Supplying of Lotous with pot (Hybrid) in the site |
| 162 | Supplying of Hybrid Water lily (Shaluk ) in the site |
| 163 | Supplying of Blue pine in the site |
| 164 | Supplying of Chinese Kamini in the site |
| 165 | Supplying of Pencil Pine in the site |
| 166 | Supplying of Ficus Starlight in the site |
| 167 | Supplying of Lemonia in the site |
| 168 | Supplying of Different types of Caktus in the site |
| 169 | Supplying of Different types of Succulent Plants in the site |
| 170 | Supplying of Solid Aquarium Pebbles (Mix Colors) in the site |
| 171 | Supplying of Super Onex Pebbles, (Medium, Wine Mix) in the site |
| 172 | Supplying of Chips Pebbles (Mixed Color) in the site |
| 173 | Supplying of Simple Onex Pebbles (Medium, Mix Color) in the site |
| 174 | Supplying of Sterameal in the site |
| 175 | Supplying of Hornmeal in the site |
| 176 | Supplying of Bone dust in the site |
| 177 | Supplying of D.A.P. in the site |
| 178 | Supplying of Urea in the site |
| 179 | Supplying of Special Sarsokhali in the site |
| 180 | Supplying of M.O.P in the site |
| 181 | Supplying of Mixture in the site |
| 182 | Supplying of Chlorocil 100 ml in the site |
| 183 | Supplying of Amazer 100 ml in the site |
| 184 | Supplying of Shola 100 ml in the site |
| 185 | Supplying of Hunter in the site |
| 186 | Supplying of Fen 200 ml in the site |
| 187 | Supplying of Rogger (250 ml container) in the site |
| 188 | Supplying of Runout 1 litre in the site |
| 189 | Supplying of Nize 50 gr in the site |
| 190 | Laying ready made carpet lawn of selection one, maxican variety |
| 191 | Supplying of Cemented pot 18\\" in the site |
| 192 | Supplying of Earthen pot 12\\" to 14\\" in the site |
| 193 | Supplying of Ceramic pot 3\\" in the site |
| 194 | Supplying of Ceramic pot 6\\" in the site |
| 195 | Supplying of Ceramic pot 9\\" in the site |
| 196 | Supplying of Ceramic pot 12\\" in the site |
| 197 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified (It-12.47.1/CPWD April, 23) |
| 198 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. (It-15.7.4/CPWD April, 23) |
| 199 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work : 65 mm nominal dia Pipes metre 1576.9 1382.6 |
| 200 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work : 50 mm nominal dia Pipes metre |
| 201 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work : 25 mm nominal dia Pipes |
| 202 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore |
| 203 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 204 | Supplying and stacking at site:Good Earth |
| 205 | Supply of cow dung manure including transportation to work site as per instruction of EIC. |
| 206 | ELECTRICAL WORKS |
| 207 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Goup A |
| 208 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 209 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 210 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 211 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 212 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. : 25mm |
| 213 | Suplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required : .5/6 amps switch |
| 214 | Suplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required : 15/16 amps switch |
| 215 | Suplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required : 3 pin 5/6 amp socket outlet |
| 216 | Suplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required : 6 pin 15/16 amp socket outlet |
| 217 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 218 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required |
| 219 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 220 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(Upto 450 mm sweep) |
| 221 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25Amps modular SP MCB, “C” curve including connection, painting etc. as required. |
| 222 | Supplying and fixing PVC batten/ angle holder including connection etc. as required |
| 223 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required : 200 A 36 KA FPMCCB |
| 224 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required : 400 A 50KA FPMCCB |
| 225 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required : 630 A 50KA FPMCCB |
| 226 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) : 6 way, Double door |
| 227 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) : 12 way, Double door |
| 228 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator : 4 way (4 + 12), Double door |
| 229 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required : Single pole |
| 230 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required : Double pole |
| 231 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required as per instruction of EIC : 63A |
| 232 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 100A |
| 233 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 234 | Supply of new LED tube light set complete of approved make in all respect 20 watt as per instruction of EIC. |
| 235 | Supply and fixing 50W LED street light set complete in all respect as per instruction of EIC |
| 236 | Supply and fixing 100W LED flood light set complete in all respect as per instruction of EIC |
| 237 | Supply and fixing 200W LED flood light set complete in all respect as per instruction of EIC |
| 238 | Supply of 20W Led Lamp complete in all respect as per instruction of EIC |
| 239 | Supply of 9W Led Lamp(B-22 Cap) complete in all respect as per instruction of EIC |
| 240 | Supply of exhaust fan 4/5 blade 220mm single phase of approved make ISI marked as per instruction of EIC(Make Bajaj, Crompton, Havells etc. or equivalent) |
| 241 | Supply of 20A Power unit complete with 4module plate, starter, plug and socket as per instruction of EIC |
| 242 | Supply of 4sq.mm 2 Core, unarmoured Aluminium cable of approved make as per instruction of EIC |
| 243 | Supply of 6sq.mm 2 Core, unarmoured Aluminium cable of approved make as per instruction of EIC |
| 244 | Supply of 10sq.mm 2 Core, unarmoured Aluminium cable of approved make as per instruction of EIC |
| 245 | Repairing of ceiling fan / exhaust fan / stand fan/ wall fan of any size with rewinding, replacement of bearing, condensor, bobin bush and shaft macheningr etc. all complete job |
| 246 | Supply of geyser element 1500W/2000W of approved make as per instruction of EIC. |
| 247 | Supply of Fan condensor 2.5 mfd of approved make as per instruction of EIC. |
| 248 | Supply of PVC tape of approved make as per instruction of EIC |
| 249 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel/ PVC conduit as required : 1 x 1.5 sq. mm |
| 250 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel/ PVC conduit as required : 2 x 4 sq. mm |
| 251 | Supply of 3 pin top 5/6 Amp. ISI marked of approved make as per instruction of EIC. |
| 252 | Supply of 3 pin top 15/16 Amp. ISI marked of approved make as per instruction of EIC |
| 253 | Supplying of Casing nails as per instruction of EIC |
| 254 | Supplying of PVC Switch board 2'' x 2'' as per instruction of EIC |
| 255 | Supplying of PVC Switch board 3'' x 6'' as per instruction of EIC |
| 256 | Supplying of PVC Switch board 6'' x 4'' as per instruction of EIC |
| 257 | Supplying of PVC Switch board 6'' x 8'' as per instruction of EIC |
| 258 | Providing & fixing of 12watt (3000K-5000K)LED square/round panel light complete set recess/surface mounted complete set as per instruction of EIC |
| 259 | Providing & fixing of 6watt (3000K-5000K)LED round panel light complete set recess/surface mounted complete set as per instruction of EIC |
| 260 | Providing & fixing of 36watt (3000K-5000K)LED square panel light complete set recess/surface mounted complete set as per instruction of EIC |
| 261 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 262 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amps switch |
| 263 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet |
| 264 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet |
| 265 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering : Upto 35 sq. mm |
| 266 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering : Above 35 sq. mm and upto 95 sq. mm (Here 50 & 70sq.mm) |
| 267 | Supply of 4core 35sqmm, 1.1KV PVC Insulated and PVC Sheathed copper power cable of approved make as per instruction of EIC |
| 268 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender