|
| 1 | Cartage of pontoons by Truck/ Trailor from Kanihar Store to site of work including loading, unloading, with the help of crane, labour, T&P etc as per direction of Engineer-in-Charge. |
| 2 | Cartage & laying of R.S. Joist (5.20 Rm.) from prayagraj store to pauthia hamirpur store /site including loading, unloading, labour, T&P etc. & placing as per direction of E/I. required for proper completion of work. |
| 3 | Cartage & laying of Railing posts from prayagraj store to pauthia hamirpur store /site including loading, unloading, labour, T&P etc. & placing as per direction of E/I. required for proper completion of work. |
| 4 | Cartage & laying of Sal wood Sleeper from prayagraj store to pauthia hamirpur store /site including loading, unloading, labour, T&P etc. & placing as per direction of E/I. required for proper completion of work. |
| 5 | Cartage & laying of Sal wood edging from prayagraj store to pauthia hamirpur store /site including loading, unloading, labour, T&P etc. & placing as per direction of E/I. required for proper completion of work. |
| 6 | Cartage & laying of Iron anchor (50kg) from prayagraj store to pauthia hamirpur store /site including loading, unloading, labour, T&P etc. & placing as per direction of E/I. required for proper completion of work. |
| 7 | Cartage & laying of Chequered plate from prayagraj store to pauthia hamirpur store /site including loading, unloading, labour, T&P etc. & placing as per direction of E/I. required for proper completion of work. |
| 8 | Leveling and Dressing of road surface (4 cm deep) including cutting/filling including labour, T&P etc., complete in all respect as per direction of Engineer-in-Charge. |
| 9 | Earth work in cutting or filling in embankment for cambering of approach link road including proper longitudinal and side grade and slope as per level given at site including cost of all labour and T&P etc. dressing & disposal of earth by head load on spoil bank of river on shore as directed by the E/I. etc. required for proper completion of work.Excluding royalty & GST. |
| 10 | brick soling work for approach road |
| 11 | Laying Reinforced Cement Concrement Pipe NP3 on First Class Bedding in Single Row |
| 12 | supply of Iron anchor |
| 13 | supply of wire rope (steel coat) 20 mm dia |
| 14 | supply of wire rope (steel coat)10 mm dia |
| 15 | supply of PP rope ( ISI MARK)@45kg per pontoon . |
| 16 | supply of 300x30mm nut bolts . |
| 17 | supply of 150x30mm nut bolts |
| 18 | supply of 300x16mm nut bolts |
| 19 | supply of 45x12mm nut bolts |
| 20 | supply of MS WASHER 30 MM & 20MM washer |
| 21 | supply of calcutta sutli |
| 22 | S/L wooden anchor for of size 2.4x1.8x3.1m.with 10 & 15cm. eucalyptus balli including cost of ballies, nails & Weaving Packing avarage 70 Sand filled cement bag & also Including anchoring with ISI mark PP rope (28 mm dia) all matrial labour T&P etc. required for proper completion of work as per direction of E/I. |
| 23 | Supply and laying of mallahi nails of approved quality 15-30 cm. long including its cost, carriage, loading, unloading and stacking at site etc. complete as per direction of Engineer-in-Charge. |
| 24 | S/o sand filled cement bags of good quality & good condition duly filled with local sand and properly stitching with sutli for filling in anchor, bundaling etc. work including cost of all material, labour, carriage, T&P etc. and placing as per direction of E/I. |
| 25 | Construction of Pile culvert (Labour only) |
| 26 | Dragging the pontoon from dry bed on the river bank to river water and making pair and anchoring them in down stream side of pantoon bridge for proper completion of the work as per direction of E/I |
| 27 | Carriage of pontoons pairs from the place of anchoring down stream side of the bridge to the bridge alignment in water and fixing the same with other pontoons pair of bridge including labour T&P etc. proper completion of the work as per direction of E/I. |
| 28 | Additional haulage of Pontoon in River (per km) |
| 29 | During carriying the pantoon pair from place of anchoring (D/S side of bridge) in water then to cross the dry bed/shallow water on the way upto the alignment, disconnecting pantoon pair and rolling the pantoon and fixing in the alignment after. |
| 30 | Sinking of Pontoons to obtain the proper gradient as laid in dry bed by digging earth including all labour T&P etc. proper completion of the work as per direction of Engineer-in-charge. |
| 31 | Fixing of railing post in position including making 16 mm dia 25 cm deep hole with the help of generator and drill machine over sleeper and all sal edging before fixing the railing post with help of 300X16 mm size nut & bolt at 1.25 mtr c/c including a E/I. |
| 32 | Two coat painting of railing post including paint and labour etc. |
| 33 | Fixing of 10 mm railing wire through hole of railing post and holes of verticals ballies post and making wire stay of each row and tighting with the help of railing wire clamp as direction of E/I.. |
| 34 | Supply and spreading of Kansa poola 5 cm thick over bridge/ pile road way before filling of 7.5 cm thick Kapsa soil including cartage of kapsa soil from distance of 1 km. on either side of bridge/pile and spreading, ramming and dressing the surface as per direction of E/I. for proper completion of work. |
| 35 | Supply and Laying of local sand including cartage (beyond 3 km) digging, loading, unloading, stacking etc. complete in non sandy area as per direction of E/I. |
| 36 | Relaying of Chequered plates to proper alignment and level including shifting upto 30 meter including cost of all labour, T&P etc. required for proper completion of work. |
| 37 | Making stay on both side of pontoon bridge with the help of 20 mm. Wire rope (labour rate only) |
| 38 | Butt Jointing of chequered plate with M.S. Plate with nut bolt (65mmx12mm/ 40mmx12mm) including nut bolt, washer, labour & T&P etc but excluding cost of Nut bolt & MS Plate. complete in all respect as per direction of Engineer-in-Charge. |
| 39 | Cartage & Fixing of man hole cover in pontoon as per direction of Engineer-in-charge. |
| 40 | Making barrier on both sides of bridge head with ballies as per direction of Engineer-in-charge.(labour rate only) |
| 41 | Making hole 14 mm dia in new chequered plate. Including labour T&P etc. |
| 42 | Supply and Fixing of wooden crate of eucalyptus balli 2.80x1.80x1.80 mtr side made of 8 cm balli including cost of labour, T&P & material. |
| 43 | Bundaling with the help 10 cm horizontal ballies and 15 cm vertical ballies @ 50 cm c/c ballie and fixing below 1.0 to 3.0 mtr of water level and palcing sand filled bags upto 30 cm above water level. |
| 44 | Maintenance of Pontoon bridge including pile on either side from start to end of Magh Mela day-night including tightening of nuts, bolts of pontoons & railing posts, repair of Kansa Poola and Kapsa soil, maintenance of Chequered plates, watering of way of Pontoon bridge and supervision of nut, bolts of Pontoons and fixing of nut, bolts removing damaged nut blots and tightening of ropes and watch and ward of camp and Pontoon bridge and other work as per direction of E/I.. |
| 45 | Hire Charges of the small boat with Mallah for Inspection of Pantoon |
| 46 | supply of labour for looking & watching pontoon pair at anchoring place during rainy/flood seasons including adjustment of rope & pontoon etc complete for day a nd night. |
| 47 | Daldal treatment in 12 meter width only with carted sand, including Labour , T&P. |
| 48 | Maintenance of Chequered Plate road excluding watering |
| 49 | Extraction of 10 mm wire rope from railing post and making role. |
| 50 | Declamping of the M.S.plate and Nut Bolt from chequered plate (labour rates only) of butt jointing-complete in all respect as per direction of Engineer-in-Charge. |
| 51 | Opening out man hole covers including loading, unloading, cartage & stacking in store at Jhunsi. Excluding GST. |
| 52 | Dismantling of R.S. Joist (5.20 Rm.) of pontoon bridge, pile and approach link road including cartage of these material from site of work to Kanihar store and also including loading, unloading stacking properly and also including all taxes all labour and work, T&P etc. required for proper completion of work as per direction of E/I. Excluding GST. |
| 53 | Dismantling of Railing posts of pontoon bridge, pile and approach link road including cartage of these material from site of work to Kanihar store and also including loading, unloading stacking properly and also including all taxes all labour and work, T&P etc. required for proper completion of work as per direction of E/I. Excluding GST. |
| 54 | Dismantling of Sal Sleeper of pontoon bridge, pile and approach link road including cartage of these material from site of work to Kanihar store and also including loading, unloading stacking properly and also including all taxes all labour and work, T&P etc. required for proper completion of work as per direction of E/I. Excluding GST. |
| 55 | Dismantling of Sal edging of pontoon bridge, pile and approach link road including cartage of these material from site of work to Kanihar store and also including loading, unloading stacking properly and also including all taxes all labour and work, T&P etc. required for proper completion of work as per direction of E/I. Excluding GST. |
| 56 | Dismantling of Iron anchor of pontoon bridge, pile and approach link road including cartage of these material from site of work to Kanihar store and also including loading, unloading stacking properly and also including all taxes all labour and work, T&P etc. required for proper completion of work as per direction of E/I. Excluding GST. |
| 57 | Dismantling of Chequered plate of pontoon bridge, pile and approach link road including cartage of these material from site of work to Kanihar store and also including loading, unloading stacking properly and also including all taxes all labour and work, T&P etc. required for proper completion of work as per direction of E/I. Excluding GST. |
| 58 | Dismantling of Other material such as washer, M.S plate, wire rope & Nut Bolts. (only cartage & loading unloading) |
| 59 | Cartage of pontoons by Truck/ Trailor after dismantling from bridge site to Jhunsi Bus stop including disconnecting the pontoons laying in dry bed / shallow water, rolling and haulage up to river bank. Loading, unloading, with the help of crane, labour, T&P etc as per direction of E/I. |
| 60 | Cartage of pontoons by Truck/ Trailor after dismantling from bridge site to Jhunsi Bus stop including haulage of the pontoons up to river bank, disconnection the help of crane, labour, T&P etc. as per direction of E/I. |
| 61 | Carrying, fixing, Lettering & painting of signage board and dismentaling and carry back to store, including all cost. |
| 62 | Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap): 300 mm dia piles |
| 63 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 64 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 65 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 66 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 67 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) with modular brick. |
| 68 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 69 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) |
| 70 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 71 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks 1:6 (1cement : 6 coarse sand) |
| 72 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 73 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. |
| 74 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 75 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm |
| 76 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 77 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 78 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 79 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 15 mm dia nominal bore |
| 80 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore |
| 81 | Providing and fixing gun metal non- return valve of approved quality (screwed end) 25 mm nominal bore Vertical |
| 82 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (Mild steel and Medium Tensile steel bars) |
| 83 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 84 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 85 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 86 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 87 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 88 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 1.00 mm thick with zinc coating not less than 275 gm/m². |
| 89 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 90 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated Jor L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.60 mm thick with zinc coating not less than 350 gm/m² |
| 91 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 92 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm |
| 93 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately Flame retardant face insulating board |
| 94 | Hire Charges of water tanker |
| 95 | Barbed wire fencing Please Enable Macros to View BoQ information |
