Name of Work:- CVR Soyamba to Ganjutola road_Road_SDBC_3.000 to 4.500 5.000 to 9.260
Sl. No.
Item Description
1
Clearing grass and removal of rubbish up to a distance of 30m outside the perifhery of the area as per Technical Specification Clause 201 of MORD by Manual means as per the direction E.I.C.
2
Providing and applying tack coat with Bitumen using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared surfaces cleaned etc as per Technical Specification as per the direction of the Engineer-in-charge
3
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH spefn. clause No. 508 complete.
4
Supplying and Installing of measurement stones including painting. Lettering in accordance with the specifications and as approved by the Engineer
5
i) Ordinary Kilometer stone
6
ii) 200 mm stone
7
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per claouse 1701.3.9 of MORD eor rurals road of required shade and colour supported and welded on 47 mm X47 mmX12 SWG sheet tube firmly fixed to the ground by mean of proporly designed foundation with M-15 Grade cement concrete 450X450 X600 mm,600 mm below ground level as per approved drawing clause 1701.2.2
8
Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and requred massege ,letters,figures with reflective engineering grade tabe as per MORD specification of required shade and colour supported and welded on 47mmX 47mm X 12 SWG squre tube of 3050mm hight duley strengthened by 25mm X 25 mm Ms flat iron on edges on back firmly fixed to the ground by means of proparly designed foundation with M-15 Grade cement concrete 450mmX450mm X600 mm , 600 mm below ground level as per approved drawing and technical specification claose 1701 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
