|
| 1 | Excavation in drains and channels etc. in earth work for pipes upto all depth in all classification of earth work such as pick work, jumper work, saturated soil i/c balling or pumping out water , blasting soft /hard rock or chiseling soft/ hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming and dressing of sides, levelling of beds to correct grade including shoring /struting, planking, timbering and dewatering wherever required stacking the useable /unusable material/soil seperately and after laying,jointing and testing of pipes ,returning the useable soil in treches in 15 cm layers including consolidating of such deposited layer by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion for traffic, night signals, fixing caution boards,crossing over trenches for access to houses, fencing etc. complete in all respect whithin all leads and lifts as per direction of the Engineer-in-charge. |
| 2 | Prov. and laying cement concrete work 1:1:2(1cement:1 and:2 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement in reinforced concrete work i/c all leads and lifts complete in all respect. |
| 3 | Foundation and plinth. |
| 4 | 15mm cement plaster in single coat on fair side on brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounding angles, chambers and or rounded angles not exceeding 80mm in girth and finished even and smooth:- Cement mortor 1:4 |
| 5 | Prov. in RCC work smooth finishing of the exposed surfaces with cement mortar 1:3(1cement:3sand). |
| 6 | Finishing wall with water proofing cement paint or approved brand and manufacture as and of required shade on undecorated wall surfaces two coats to give an even shade after thoroughly brushing the surface to remove dirt and dust of remaining work. |
| 7 | 20mm cement plaster on rough side of bricks/stone walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth:-a)In cement mortar 1:3(1cement:3sand). |
| 8 | Providing and fixing double flanged cast iron sluice valve of KSB/Leader/Kirloskar make and of various dia for the delivery line of the pump and capable of with standing the normal seat pressure as per IS:14846 with upto date amendment complete in all respect as per the direction of the Engineer-in-charge. |
| 9 | 80mm dia. |
| 10 | 65 mm dia |
| 11 | Providing, Laying and jointing in trenches,galvanised mild steel tubes (Light grade)confirming to IS-1239 (Part-I) 2004 i/c tube fittings such as Tee, elbow, union & nipple.(earth work in trenches to be measured and paid for separately)i/c all leads and lifts complete. |
| 12 | 15mm dia. |
| 13 | 20mm dia. |
| 14 | 25mm dia. |
| 15 | 32mm dia. |
| 16 | 40mm dia |
| 17 | 65mm dia |
| 18 | Prov. and fixing brass full way valve with wheel of superior quality including all leads and lifts In :- |
| 19 | 65 mm dia |
| 20 | 50 mm dia |
| 21 | 40 mm dia |
| 22 | 32 mm dia |
| 23 | 25 mm dia |
| 24 | 20 mm dia |
| 25 | 15 mm dia |
| 26 | Providing and fixing of G.I.Union as per ISI specifications No.1879-1987(with latest ammendment) of various dia complete in all respect i/c all leads and lifts as per the direction of the Engineer-in-charge. |
| 27 | 65 mm dia |
| 28 | 50 mm dia |
| 29 | 40 mm dia |
| 30 | 32 mm dia |
| 31 | 25 mm dia |
| 32 | 20 mm dia |
| 33 | 15 mm dia |
| 34 | Providing and fixing G.I.Nipple 230 mm long of different diameter complete in all respect i/c all leads and lifts. (230mm long). |
| 35 | 40 mm dia |
| 36 | 32 mm dia |
| 37 | 20 mm dia |
| 38 | 15 mm dia |
| 39 | Providing and fixing G.I.Nipple 100 mm long of different diameter complete in all respect i/c all leads and lifts. (100mm long). |
| 40 | 40 mm dia |
| 41 | 32 mm dia |
| 42 | 20 mm dia |
| 43 | 15 mm dia |
| 44 | Removal of filter media from filter beds duly graded screened, washed and cleaned complete in all respect as specified by the Engineer-in-charge. |
| 45 | White washing with lime on decorated wall surfaces one coat to give an even shade including thoroughly brooming the surface to remove all dirt, dust , mortar drops and loose scale of lime wash and other foreign matter as per the direction of Engineer-in-charge including all leads and lifts. |
| 46 | Providing and placing in horizontal layer filtering media duly graded ,screened, washed and cleaned as specified by the Engineer-in-charge. i/c all leads and lifts. |
| 47 | I. Top layer:- Fine sand (Eff.size 0.20mm to 0.40mm and uniformity-co- efficient 2.00 to 3.00). |
| 48 | II. Second layer:- Coarse sand 3mm to 6mm. |
| 49 | Placing and washing of old filter media after taking 80% serviceable as specified by the Engineer-in-charge including all leads and lifts. |
| 50 | III.Third layer:- Bajri 6mm to 20mm. |
| 51 | IV. Fourth layer:- Bajri 20mm to 25mm. |
| 52 | V. Bottom layer:- Broken stone 50mm to 75mm size. Please Enable Macros to View BoQ information |