Tender For Fixation Of Rate Contract For Supply Of Material Like, Sand, Bajri, Stone, Portland Cement, Cgi Sheets, Structural Steel, Tmt Steel Bars, Interlocking Tiles Of 50Mm Thickness Etc As Per Boq Under Mgnrega Pyt.Chanipora A
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Jul 2026
4 days left
EMD
10000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fixation Of Rate Contract For Supply Of Material Like, Sand, Bajri, Stone, Portland Cement, Cgi Sheets, Structural Steel, Tmt Steel Bars, Interlocking Tiles Of 50Mm Thickness Etc As Per Boq Under Mgnrega Pyt.Chanipora A
BOQ
| Sl. No. | Item Description |
| 1 | Seam bolts and nuts 6 mm dia and 25 mm long |
| 2 | Fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick |
| 3 | Fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge |
| 4 | Fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge |
| 5 | Fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge |
| 6 | Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips |
| 7 | Fibre (high impact poly propelene reinforced) cement corrugated apron piece |
| 8 | Fibre (high impact poly propelene reinforced) cement eaves filler piece |
| 9 | Fibre (high impact poly propelene reinforced) cement north light curves |
| 10 | Non-Asbestos fibre (high impact poly propelene reinforced) cement ventilator curves |
| 11 | Fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick |
| 12 | Fibre (high impact poly propelene reinforced) cement ridge finial |
| 13 | Fibre (high impact poly propelene reinforced) cement special north light curves |
| 14 | Fibre (high impact poly propelene reinforced) cement S type louvers |
| 15 | Multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick |
| 16 | Multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick |
| 17 | 6 mm thick heavy duty fiber cement board |
| 18 | 8 mm thick heavy duty fiber cement board |
| 19 | 9 mm thick heavy duty fiber cement board |
| 20 | 12.5 mm thick Gypsum plaster board |
| 21 | 6 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 22 | 8 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 23 | Brick Aggregate (single size):63 mm nominal size |
| 24 | Brick Aggregate (single size):50 mm nominal size |
| 25 | Brick Aggregate (single size):40 mm nominal size |
| 26 | Stone Aggregate(single size):63 mm nominal size |
| 27 | Stone Aggregate(single size):50 mm nominal size |
| 28 | Stone Aggregate(single size): 40 mm nominal size |
| 29 | Stone Aggregate(single size):25 mm nominal size |
| 30 | Stone Aggregate(single size):20 mm nominal size |
| 31 | Stone Aggregate(single size): 12.5 mm nominal size |
| 32 | Stone Aggregate(single size): 10 mm nominal size |
| 33 | Stone Aggregate(single size): 06 mm nominal size |
| 34 | Safeda ballies 125 mm diameter |
| 35 | Cowdung |
| 36 | Bajiri |
| 37 | Bamboo 25 mm dia 2.5 meter long |
| 38 | Bhusa |
| 39 | Paving bitumen of grade VG 10 of approved quality |
| 40 | Bitumen emulsion |
| 41 | Bitumen grade PMB - 40 |
| 42 | Blown type petroleum bitumen of penetration 85/25 of approved quality |
| 43 | Bitumen hot sealing compound : grade A |
| 44 | Bitumen solution primer of approved quality |
| 45 | Premoulded joing filler 12 mm thick |
| 46 | Bitumen felt fibre base (vegetable or animal): Type 2 grade 1 |
| 47 | Bitumen felt as per IS 7193 Grade II |
| 48 | Bitumen felt : Type 3 grade 1 |
| 49 | Separation Membrane of impermeable plastic sheeting 125 micron thick |
| 50 | Coal Tar |
| 51 | Blasting powder |
| 52 | Blasting fuse (fuse wire) |
| 53 | White face insulating board : 12 mm thick |
| 54 | Natural colour insulating board : 12 mm thick |
| 55 | Flame retardant face insulating board : 12 mm thick |
| 56 | Flame retardant face inslulating, impregnated fibre board 12 mm thick |
| 57 | Flat pressed 3 layer particle board (medium density) Grade 1,12 mm thick |
| 58 | Extra for veneered particle board with : Teak veneering on one side and commercial veneering on other side |
| 59 | Extra for veneered particle board with Commercial veneering on both sides |
| 60 | Extra for veneered particle board with Teak veneering both sides |
| 61 | Curing compound |
| 62 | Integral cystalline slurry |
| 63 | Integral crystalline admixture |
| 64 | Crystalline mortar |
| 65 | Integral cystalline dry shake |
| 66 | Swellable type water stop tape |
| 67 | Primer for swellable type wate stop tape |
| 68 | Polymer modified adhesive mortar |
| 69 | Brick bats |
| 70 | Wire brush |
| 71 | Soft brush |
| 72 | Portland Cement |
| 73 | White cement |
| 74 | Plastic sheath,1.25 mm thick for dowel bars |
| 75 | Coal (steam) |
| 76 | Sealant primer |
| 77 | Cramp Gun metal 25x6x300 mm |
| 78 | Pre moulded joint filler, 25mm thick for expansion joint |
| 79 | Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm |
| 80 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 81 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 82 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 83 | Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide |
| 84 | Bright finished or black enameled mild steel screws 40 mm |
| 85 | Bright finished or black enameled mild steel screws 20 mm |
| 86 | Decorative type Louvers (upto 0.20 sqm) in Block board construction flush door |
| 87 | Rebate cutting in Block board construction flush door |
| 88 | Decorative plywood 4 mm |
| 89 | Fuel wood |
| 90 | Calcium silicate base compound for jointing calcium silicate tiles |
| 91 | Hessian cloth |
| 92 | Cement Concrete Jali 50 mm thick |
| 93 | Cement Concrete Jali 40 mm thick |
| 94 | Cement Concrete Jali 25 mm thick |
| 95 | Kerosene oil |
| 96 | Unslaked lime |
| 97 | Deharadun white lime |
| 98 | Dry hydrated lime (factory made) |
| 99 | Marble dust/ powder |
| 100 | Marble chips up to 4 mm and downsize white &black |
| 101 | Silicon and acrylic emulsion |
| 102 | Acrylic distemper Ist quality, having VOC content less than 50 gm/litre |
| 103 | Acrylic emulsion, having VOC content less than 50 gm/litre |
| 104 | Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre |
| 105 | Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre |
| 106 | Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre |
| 107 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 108 | Exterior primer |
| 109 | Moorum |
| 110 | Mud (dry) |
| 111 | Dry distemper |
| 112 | Oil bound washable distemper/ Acrylic distemper |
| 113 | Linseed oil (double boiled) |
| 114 | Cement Primer |
| 115 | Distemper primer |
| 116 | Pink primer (for wood) |
| 117 | White cement based putty |
| 118 | Aluminium paint |
| 119 | Acid proof paint (chocolate or black) |
| 120 | Anticorrosive bituminous paint (black) |
| 121 | Black Japan |
| 122 | Enamel paint |
| 123 | Floor enamel paint in all shades except green |
| 124 | Synthetic enamel paint in black or chocolate shade |
| 125 | Synthetic enamel paint in all shades except black or chocolate shade |
| 126 | Plastic emulsion paint |
| 127 | Roofing paint for iron sheets in red colour |
| 128 | White lead |
| 129 | water proofing cement paint |
| 130 | Wax polish (ready made) |
| 131 | Ordinary varnish |
| 132 | Superior copal varnish |
| 133 | Superior spar varnish |
| 134 | Oil type wood preservative |
| 135 | Putty for wood work |
| 136 | pig lead |
| 137 | Premixed super white gypsum plaster |
| 138 | Plaster or paris |
| 139 | Copper pins 6 mm dia 7.5 cm long |
| 140 | Black colour dark shade pigment |
| 141 | Red chocolate, orange, buff or yellow (red oxide of iron) light shade |
| 142 | Green or blue medium shade pigment |
| 143 | Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia |
| 144 | Royalty for good earth |
| 145 | Coarse sand (zone III) |
| 146 | Fine sand (zone IV) |
| 147 | Galvanised steel plain sheets |
| 148 | Standard quality hard board sheet 3 mm thick |
| 149 | Standard quality hard board sheet 4.5 mm thick |
| 150 | Mild steel round bar 12 mm dia and below |
| 151 | Mild Steel round bar above 12 mm dia |
| 152 | Average rate of mild steel round bars for reinforcements |
| 153 | Twisted steel/deformed bars |
| 154 | Mild steel square bars |
| 155 | Structural steel such as tees, angles, channels andR.S. joists |
| 156 | Flats up to 10 mm in thickness |
| 157 | Flats exceeding 10 mm in thickness |
| 158 | Mild steel plates |
| 159 | Steel glazed door, window/ ventilator, all members viz, F7D, F4B, K11 and K12B etc. |
| 160 | Mild steel rivets |
| 161 | Hard drawn steel wire fabric |
| 162 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 163 | Galvanised steel J or L hooks 8 mm dia |
| 164 | Galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots |
| 165 | Mild steel bolts 6 mm dia and 25 mm long with hexagonal head |
| 166 | Straining bolts |
| 167 | Galvanished steel barbed wire |
| 168 | Galvanised steel turn buckles |
| 169 | Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts |
| 170 | Galvanised steel bolts 10 mm dia and 7 cm long with nuts |
| 171 | Bolts and nuts up to 300 mm in length |
| 172 | Bolts and nuts above 300 mm in length |
| 173 | Iron pintels including weldded pin |
| 174 | Boundary stone top chisel dressed 15X15X90 cm |
| 175 | Through and bond stone size 24 x 24 x 39cm |
| 176 | Stone for masonry work |
| 177 | Stone for pitching 15 cm x 22.5 cm |
| 178 | Stone dust |
| 179 | Kota stone slab 20 mm to 25 mm thick (semi-polished) |
| 180 | White sand stone slab 45 mm to 50 mm thick (un-dressed) |
| 181 | Stone grit 6 mm and down size or pea sized gravel |
| 182 | Crushed stone 2.36 mm to 12.5 mm size |
| 183 | Surkhi |
| 184 | Second class deodar wood in planks |
| 185 | First class kail wood in planks |
| 186 | Second class kail wood in scantling |
| 187 | Second class kail wood in planks |
| 188 | Sal wood in scantling |
| 189 | Precast terrazzo tiles 22 mm thick (light shade) |
| 190 | Precast terrazzo tiles 22 mm thick (medium shade) |
| 191 | Precast terrazzo tiles 22 mm thick (dark shade) |
| 192 | Precast heat resistant terrance tiles (size 300x300 mm) and 20 mm thick |
| 193 | G.I Limpet washer |
| 194 | Bitumen washer |
| 195 | G.I. Plain washer thick |
| 196 | G.I. Plain washer thin |
| 197 | G.I. Plain washer for seam bolts |
| 198 | Water proofing materials |
| 199 | Welding by gas plant |
| 200 | Welding by electric plant |
| 201 | Whiting |
| 202 | Wire nails |
| 203 | Wire mesh (rabbit) |
| 204 | 20 mm dia holding down bolts |
| 205 | Mild steel sheets with bolts and nuts to rest on pintels |
| 206 | Hard drawn steel wire |
| 207 | Mild steel flat strap fitting |
| 208 | Chequered terrazzo tiles 22 mm thick (light shade) |
| 209 | Chequered terrazzo tiles 22 mm thick (medium shade) |
| 210 | Chequered terrazzo tiles 22 mm thick (dark shade) |
| 211 | Extra for selected planks of second class teakwood |
| 212 | Diesel oil |
| 213 | Bleaching powder |
| 214 | Common burnt clay F.P.S. (non modular) bricks tile class designation 10 |
| 215 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 216 | Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) |
| 217 | Play wood 5 play with commericila ply on both faces 6 mm thick |
| 218 | 12 mm commercial ply |
| 219 | 18 mm thick block board with commercial ply veneering on both side |
| 220 | 21 mm thick clear toughened Laminated glass for fins with holes |
| 221 | Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
| 222 | Stone Aggregate (single size) : 80 mm nominal size |
| 223 | Stone chippings/ screenings 4.75 mm nominla size |
| 224 | Stone chippings/ screenings 150 micron nominal size |
| 225 | Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size |
| 226 | Stone chippings/screenings 12.5/13.2 mm nominal size |
| 227 | Stone Chippings/ screenings 10/ 11.2 mm nominal size |
| 228 | Solvent |
| 229 | Galvanised steel corrugated sheets |
| 230 | Mild steel tubes hot finished welded type |
| 231 | Mild steel tubes hot finished seamless type |
| 232 | Aluminium primer |
| 233 | Red oxide Zinc chromate primer |
| 234 | Copper acetate |
| 235 | Mobil oil |
| 236 | Galvanised wire mesh of average width of aperture1.4 and nominal dia. of wire 0.63 mm |
| 237 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 238 | Epoxy paint |
| 239 | Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
| 240 | Granite of any colour, 18 mm thick (slab area above 0.50 sqm) |
| 241 | wall form panel 1250x500 mm |
| 242 | Tie bolt 12 mm dia 100 mm length |
| 243 | Tie bolt 12 mm dia 150 mm length |
| 244 | Tie bolt 20 mm dia 150 mm length |
| 245 | Tile bolt 20 mm dia 225 mm length |
| 246 | Spring coil 12 mm |
| 247 | Plastic cone 12 mm dia |
| 248 | Corner angle 45x45x5 mm 1.50 m long |
| 249 | 100 mm channel shoulder 2.5 m long |
| 250 | Double clip (bridge clip) |
| 251 | Single clip |
| 252 | M.S. Tube 40 mm dia |
| 253 | Wall form panel 1250x450xmm |
| 254 | Corner angle 45x45x5 mm 2.50 long |
| 255 | Column clamp 450x1070 mm |
| 256 | Prop 2 m (2-3.5m) |
| 257 | Binding wire |
| 258 | Adjustable span ESO+SI (2.35-3.40) |
| 259 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 260 | Beam clamp 300-380 mm (450-1070 mm) |
| 261 | Prop 4 m |
| 262 | Double coupler |
| 263 | Glass sheet (pin headed ) 4 mm thick |
| 264 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 265 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 266 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 267 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc |
| 268 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc |
| 269 | Vitrified floor tile 50x50 cm |
| 270 | Vitrified floor tile 60x60 cm |
| 271 | Vitrifies floor tile 80x80 cm |
| 272 | Interlocking C.C. paver block (60 mm thick, M-30) |
| 273 | Sundries Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 days