Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 2 | Bemina Site |
| 3 | Harwan Site |
| 4 | Excavating, supplying ,filling and spreading of local earth (including royalty)by mechanical transport for all carraiges, leads and lifts , including ramming and watering of the earth in layers not exceeding 20 cm (complete job along with all relevant necessary testing to be carried out by the concerned agency ). |
| 5 | Bemina Site |
| 6 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts,spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30. |
| 7 | Bemina Site |
| 8 | Providing,supplying and laying in position stone soling on level including Carriage and as per direction of Engineer-in-charge. |
| 9 | Bemina Site |
| 10 | Harwan Site |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Bemina Site |
| 13 | Harwan Site |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Bemina Site |
| 16 | Harwan Site |
| 17 | Centering & Shuttering including strutting, propping, etc. & removal of form for: |
| 18 | Bemina Site |
| 19 | In foundation raft |
| 20 | Beams |
| 21 | In suspended floors etc |
| 22 | Stairs |
| 23 | In column , pillers,piers,abutments,posts and struts |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 25 | Harwan Site |
| 26 | In foundation raft |
| 27 | Beams |
| 28 | In suspended floors etc |
| 29 | Stairs |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc |
| 31 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete below plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 32 | Bemina Site |
| 33 | Harwan Site |
| 34 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 35 | Bemina Site |
| 36 | Harwan Site |
| 37 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6( 1 cement : 6 coarse sand) |
| 38 | Bemina Site |
| 39 | Harwan Site |
| 40 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 41 | Bemina Site |
| 42 | Harwan Site |
| 43 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRMing process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 KG), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes - AIS make, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. hree track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 SQM). |
| 44 | Bemina Site |
| 45 | Harwan Site |
| 46 | Providing and fixing factory made uPVC white colour casement/ Casement CUM fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRMing process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 SQM) & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). |
| 47 | Bemina Site |
| 48 | Harwan Site |
| 49 | Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete |
| 50 | Bemina Site |
| 51 | Harwan Site |
| 52 | 12 mm cement plaster on internal wall in (1: 6) cement sand mix. |
| 53 | Bemina Site |
| 54 | Harwan Site |
| 55 | 18mm Cement plaster in two coats Under layer 12mm thick cement plaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 6 (1 cement : 6 fine sand) |
| 56 | Bemina Site |
| 57 | Harwan Site |
| 58 | Providing and applying Plaster of Paris of required thickness over concrete surface to prepare the surface even and smooth complete |
| 59 | Bemina Site |
| 60 | Harwan Site |
| 61 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 62 | Bemina Site |
| 63 | Harwan Site |
| 64 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture. |
| 65 | Bemina Site |
| 66 | Harwan Site |
| 67 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 68 | Bemina Site |
| 69 | Harwan Site |
| 70 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand). |
| 71 | Bemina Site |
| 72 | Harwan Site |
| 73 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer- in-Charge, in walls, skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 74 | Bemina Site |
| 75 | Harwan Site |
| 76 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 77 | Bemina Site |
| 78 | Harwan Site |
| 79 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 80 | Bemina Site |
| 81 | Harwan Site |
| 82 | Dry Random Rubble masonry with hard stone in foundation and plinth. |
| 83 | Bemina Site |
| 84 | Harwan Site |
| 85 | Plumbing |
| 86 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 87 | Bemina Site |
| 88 | Harwan Site |
| 89 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps with pedestal |
| 90 | Bemina Site |
| 91 | Harwan Site |
| 92 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 93 | Bemina Site |
| 94 | Harwan Site |
| 95 | Providing & Fixing following PVC (B Type) fittings of approved brand and quality as directed by engineer incharge all complete roved brand and manufacture |
| 96 | PVC collar 100mm |
| 97 | Harwan Site |
| 98 | PVC Reducer 100x75mm |
| 99 | Harwan Site |
| 100 | Cowl 75 mm size |
| 101 | Harwan Site |
| 102 | PVC pipe Clamps |
| 103 | Harwan Site |
| 104 | Vent Pipe Pvc 75 mm |
| 105 | Harwan Site |
| 106 | Providing and fixing of PVC pipe (Type \\"B\\") in proper gradient with fittings such as bends , Tees, Coupler etc jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc all complete having approved make and quality including all carriages upto site.200mm dia |
| 107 | Bemina Site |
| 108 | Harwan Site |
| 109 | Providing and fixing of PVC pipe (Type \\"B\\") in proper gradient with fittings such as bends , Tees, Coupler etc jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc all complete having approved make and quality including all carriages upto site.150mm dia |
| 110 | Bemina Site |
| 111 | Harwan Site |
| 112 | Providing and fixing of PVC pipe (Type \\"B\\") in proper gradient with fittings such as bends , Tees, Coupler etc jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc all complete having approved make and quality including all carriages upto site.100mm dia |
| 113 | Bemina Site |
| 114 | Harwan Site |
| 115 | Providing and fixing of PVC pipe (Type \\"B\\") in proper gradient with fittings such as bends , Tees, Coupler etc jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc all complete having approved make and quality including all carriages upto site.75mm dia |
| 116 | Bemina Site |
| 117 | Harwan Site |
| 118 | Providing and fixing toilet paper holder of C.P. brass |
| 119 | Bemina Site |
| 120 | Harwan Site |
| 121 | Providing & Fixing of GI pipe fittings complete with all Fittings and clamps including cutting and making good the walls whereever required as per BC and as directed by engineer incharge. |
| 122 | 15mm Dia nominal bore |
| 123 | Harwan Site |
| 124 | 20mm Dia nominal bore |
| 125 | Harwan Site |
| 126 | 25 mm Dia nominal bore |
| 127 | Harwan Site |
| 128 | 32 mm Dia nominal bore |
| 129 | Harwan Site |
| 130 | 40 mm Dia nominal bore |
| 131 | Harwan Site |
| 132 | Providing & Fixing of GI union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 133 | 15 mm nominal bore |
| 134 | Harwan Site |
| 135 | 20 mm nominal bore |
| 136 | Harwan Site |
| 137 | 25 mm nominal bore |
| 138 | Harwan Site |
| 139 | 32 mm nominal bore |
| 140 | Harwan Site |
| 141 | 40 mm nominal bore |
| 142 | Harwan Site |
| 143 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 144 | 20mm Dia |
| 145 | Bemina Site |
| 146 | Harwan Site |
| 147 | 25 mm Dia |
| 148 | Bemina Site |
| 149 | Harwan Site |
| 150 | 32 mm Dia |
| 151 | Bemina Site |
| 152 | Harwan Site |
| 153 | 40 mm Dia |
| 154 | Bemina Site |
| 155 | Harwan Site |
| 156 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 157 | Bemina Site |
| 158 | Harwan Site |
| 159 | Providing and fixing of CP Grating of approved make including all accessories complete. |
| 160 | Bemina Site |
| 161 | Harwan Site |
| 162 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 163 | Bemina Site |
| 164 | Harwan Site |
| 165 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 166 | Bemina Site |
| 167 | Harwan Site |
| 168 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 169 | Bemina Site |
| 170 | Harwan Site |
| 171 | Providing and fixing PTMT towel rail complete with, brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 172 | Bemina Site |
| 173 | Harwan Site |
| 174 | Providing wood work in frames of false ceiling ,partition etc sawn and fixed in position of Budloo wood |
| 175 | Bemina Site |
| 176 | Harwan Site |
| 177 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 178 | Bemina Site |
| 179 | Harwan Site |
| 180 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge.. All works upto plinth level. |
| 181 | Bemina Site |
| 182 | Harwan Site |
| 183 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. All works above plinth level upto floor V level. |
| 184 | Bemina Site |
| 185 | Harwan Site |
| 186 | Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. |
| 187 | Bemina Site |
| 188 | Harwan Site |
| 189 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 190 | Bemina Site |
| 191 | Harwan Site |
| 192 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 193 | Bemina Site |
| 194 | Harwan Site |
| 195 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 196 | Bemina Site |
| 197 | Harwan Site |
| 198 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 199 | Bemina Site |
| 200 | Harwan Site |
| 201 | Providing ridges/valley/hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m2 |
| 202 | Bemina Site |
| 203 | Harwan Site |
| 204 | Providing and fixing plained eaves boarding. 2nd class Kail wood- 250x32 mm (nominal size ) |
| 205 | Bemina Site |
| 206 | Harwan Site |
| 207 | Providing and fixing 12mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 2nd class kail wood |
| 208 | Bemina Site |
| 209 | Harwan Site |
| 210 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade (Area of slab over 0.5 sqm |
| 211 | Bemina Site |
| 212 | Harwan Site |
| 213 | Providing and fixing scaffolding system on the exterior side, up to desired height made for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall have essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 214 | Bemina Site |
| 215 | Harwan Site |
| 216 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including waste pipe& flusing mechanism |
| 217 | Bemina Site |
| 218 | Harwan Site |
| 219 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm. |
| 220 | Bemina Site |
| 221 | Harwan Site |
| 222 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 40 mm dia |
| 223 | Bemina Site |
| 224 | Harwan Site |
| 225 | Providing and fixing of health faucet of reputed make with 8mm dia, 1.2 m long flexible tube and wall hook complete job |
| 226 | Bemina Site |
| 227 | Harwan Site |
| 228 | Providing and fixing 600x450mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to cleats with CP brass screws and washers complete job |
| 229 | Bemina Site |
| 230 | Harwan Site |
| 231 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 232 | Bemina Site |
| 233 | Harwan Site |
| 234 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 19.26.1 With common burnt clay (non modular) bricks of class designation 7.5 |
| 235 | Bemina Site |
| 236 | Harwan Site |
| 237 | Supply and installation of fire extinguisher, Filled with MAP 50 ABC Dry Chemical Powder, Portable Fire Extinguisher, Easy to use and refillable,Suitable for class A, B, C and Electrically Started Fire ISI Approved as per IS 15683, ISO, CE Approved Min. Discharge Time: 8 Seconds Working Temperature: -10 to 60 degrees Celsius of 6 kg. |
| 238 | Bemina Site |
| 239 | Harwan Site |
| 240 | Providing and fixing Powder coated Aluminium work with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the cieling to support the frame including necessary filling up of gaps at junctions, top, bottom, with required PVC , neoprene felt etc. Aluminium sections shall be smooth, rust free,straight, metered and jointed mechanically where ever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless stell screws all complete as per architectural drawings and the direction of engineer in charge with powder coated aluminium section. Pre laminated flat pressed three layer of graded wood particle board conforming ti IS: 12823 grade I type II in panelling of partition walls or with float glass panes of 5mm or higher thickness (Modi , Saint Gobain or equivalent) panelling of required height complete in all respects including all hardware fittings, shutters for doors etc as per directions of Engineer in charge. |
| 241 | Bemina Site |
| 242 | Harwan Site |
| 243 | Extra rates for quantities of works executed : In or under water and/ or liquid mud, including pumping out water as required. |
| 244 | Bemina Site |
| 245 | Providing and fixing Tube Well including Boring with 100 mm diameter casing pipe upto a required depth(30 metre or more), including providing in position filters of G.I. pipe with brass strainer of approved quality, including placing in position hand pump of approved make, including cost of unions, including erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 35 to 120 LPM discharge at 144 to 35 m head & discharge & delivery pipe of Size-40 mm diameter with a necessary H type clamps. |
| 246 | Bemina Site |
| 247 | Providing & fixing of cockroach trap (3pc) gully trap. |
| 248 | Bemina Site |
| 249 | Harwan Site |
| 250 | Sink Mixer for Kitchen of approved make & quality. |
| 251 | Bemina Site |
| 252 | Harwan Site |
| 253 | Stainless Steel Kitchen Sink with drain board 510x1040mm bowl depth 225 mm along with all fittings and fixtures all complete. |
| 254 | Bemina Site |
| 255 | Harwan Site |
| 256 | Providing S or P trap at site complete with all operations including all necessary materials , labour, CP fittings, PPR fittings all complete |
| 257 | Bemina Site |
| 258 | Harwan Site |
| 259 | Providing & fixing CP conectors having length 600mm or more as required at site |
| 260 | Bemina Site |
| 261 | Harwan Site |
| 262 | Providing & fixing CP brass extension nipple of required size and of approved make and quality. |
| 263 | Bemina Site |
| 264 | Harwan Site |
| 265 | Providing & fixing PTMT extension nipple for water tank pipe, fittings of approved quality |
| 266 | Bemina Site |
| 267 | Harwan Site |
| 268 | Providing and Fixing Automatic Boom Barrier of required Boom Length 6.50 m consisting of a fixed Powder Coated stainless steel housing and White Powder Coated movable arm consisting of refractor strips and LED flashing lights on top, The housing shall contain the motor, spring and control unit with Frequency 50Hz, Water protection, IP protection -IP-55 , Operating time 9-11 secs with power Source 230V+/- 10% and environment temperature -10 to +50 degree C as per design and as directed by Engineer-In-Charge. |
| 269 | Bemina Site |
| 270 | Providing and fixing any weather, colour coated, customized, automatic opening and closing, MS Sliding Gate of suitable width including all carriages. Colour and design of Gate to be approved by engineer in-charge complete job. |
| 271 | Bemina Site |
| 272 | Engineering, designing, procurement and construction of Effluent Treatment Plant (ETP) of MBBR technology and approved Brand including all civil works (UG RCC collection tank,treated water tank with waterproofing, Bar screen,OGT etc.), all electrical works & all mechanical works including tertiary treatment etc. for the building/campus/Bus depot for a plant size of 20 KLD including installation and commissioning. The Contractor shall submit the designs/drawings/specifications for the approval of the Engineer in charge. The payment shall be made after successful commissioning of the constructed ETPin all respects. Complete job BEMINA/HARWAN SITE |
| 273 | 1ST YEAR WARRANTY |
| 274 | 2ND YEAR WARRANTY |
| 275 | 3RD YEAR WARRANTY |
| 276 | *O&M covers repair/replacement of equipments like pipe,valves and fittings, belts,gas kits, wheels, electrical items (lights,fuses,lamps,heaters,UV, flow meters,ozonate,sensors),chemicals,pumps/dosing pumps,UPVC pipe and fittings,multipot valves and all other relevant items deemed necessary. |
| 277 | Engineering,designing,procurement and construction of Automatic 2-Brush Bus WashMachine of approved technology and Brand with Blaster System,Imported Brush & PLC Controller( (1-Washing Time 2 To 3 Minute, 2- High Pressure Nozzles Ss 304, 3- Imported Brush, 4-Plc Controlled, 5- Foaming Enabled, 6- Brushes Life 5000 Cycles Minimum, 7- Reputed Make Gear & Motors, 8- Reputed Make Electrical of appropriate technology including all civil works, all plumbing works, all electrical works & all mechanical works etc including installation and commissioning.The Contractor shall submit the designs/drawings/specifications for the approval of the Engineer in charge. The payment shall be made after successful commissioning of the constructed Automatic two brush Bus wash Machine in all respects. Complete job Bemina Site |
| 278 | 1ST YEAR WARRANTY |
| 279 | 2nd YEAR WARRANTY |
| 280 | 3rd YEAR WARRANTY |
| 281 | *O&M covers repair/replacement of equipments like pressure nozzle, brush, gear and motor, electrical/mechanical components & all other relevant items deemed necessary |
| 282 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications |
| 283 | Bemina Site |
| 284 | Harwan Site |
| 285 | Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound.(The payment shall be made per m length of the joint having depth of 1 cm and width of I cm) Bemina Site |
| 286 | Bemina Site |
| 287 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement-M20 (1:1.5:3) |
| 288 | Bemina Site |
| 289 | Harwan Site |
| 290 | Providing and fixing plained eaves boarding of G I sheets including fixing using necessary iron screws etc. complete job at site inclusive all carriages as per the directions of site incharge. |
| 291 | Bemina Site |
| 292 | Harwan Site |
| 293 | Clearing grass,rank vegetation, bush and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 294 | Bemina Site |
| 295 | Harwan Site |
| 296 | Removal of unsuitable soft and marshy strata (so classified by the site engineer) from designated sites and its safe disposal as per directions, all inclusive |
| 297 | Bemina Site |
| 298 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 299 | Bemina Site |
| 300 | Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or soling etc. and rerolling the subgrade in layers not exceeding 20 cm (complete job). |
| 301 | Bemina Site |
| 302 | Spreading of good earth, soling in required thickness as per directions of officer in-charge |
| 303 | Bemina Site |
| 304 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 305 | Bemina Site |
| 306 | Harwan Site |
| 307 | Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, leveling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in- charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to ,be paid separately) |
| 308 | Bemina Site |
| 309 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge |
| 310 | Bemina Site |
| 311 | Construction of dry lean cement concrete sub base over a prepared subgrade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications,cement content not to be less than 150 Kg/cum, optimum moisture contentto be determined during trial length construction, concrete strength not tobe less than 10 Mpa at 7 days, mixed in a batching plant, transported tosite, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in-charge Bemina Depot |
| 312 | Electrical |
| 313 | ILLUMINATION |
| 314 | Supplying and erecting 20 Mtr (clear height) High Mast (Top-150mm,Bottom- 460mm) with lowering and raising motorized unit, Vertical lantern carriage assembly suitable for max. 12 nos. luminaries and its control gear box, lightning final arrangement for fixing aviation light and foundation bolts on foundation with Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer,single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete, M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 20 m raising lowering high mast), 12 No LED Flood light fitting of 200W per High Mast Pole (Total 24 Nos) including lamp,with PF> 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete, Chemical Earthing per Pole (Total 2 Nos) , internal wiring for LED Luminaries (Wiring for 2 Poles) (Complete Job as per directions of Engineer In Charge) |
| 315 | Bemina Site |
| 316 | Harwan Site |
| 317 | Supply and Laying of HDPE pipe 90 mm Outer Dia including trench excavation in hard soil (0.45x0.75x1000m) for laying of Underground Almunium armoured cable . The job further includes refilling back the same and removal of surplus excavated material to an appropriate place including reinstatement of road to its original state (Complete Job as per directions of Engineer In Charge) |
| 318 | Bemina Site |
| 319 | Harwan Site |
| 320 | Supply, Installation, Testing and Commissioning of Outdoor type LT control panel size 900mm x 900mm x 450mm having input main control of 100 Amp MCCB with TPN Bus Bar with 40 Amp TPN MCB 4Nos for outgoing circuits,including astronomical switching with contactor of required capacity. The panel should be fitted with a digital composite voltmeter/amper meter/indicator set with selecter switch and backup protection system, thimbling and the panel shall further be provided with proper openings on front side as well as on rear side including its locking arrangement and also with required glands and 4No. angle iron legs for grouting the panel on bed, including skirting, the panel shall also be provided with powder coat/PU paint. The item includes its thimble as required at taping point for incomming, out going and internal panel wiring complete unit.(Complete Job as per directions of Engineer In Charge) |
| 321 | Bemina Site |
| 322 | Harwan Site |
| 323 | Supply Installation testing and commissioning of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25 sqmm cable and outgoing 25/16 sqmm cable circuits (Complete Job as per directions of Engineer In Charge) |
| 324 | Bemina Site |
| 325 | Harwan Site |
| 326 | INTERNAL WIRING WITH ALLIED ACCESSORIES |
| 327 | Wiring for light point/ Fan point, Exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Complete Job as per directions of Engineer In Charge) |
| 328 | Bemina Site |
| 329 | Harwan Site |
| 330 | Wiring for light plugs with 2x2.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 2.5 Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(Complete Job as per directions of Engineer In Charge) |
| 331 | Bemina Site |
| 332 | Harwan Site |
| 333 | Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(Complete Job as per directions of Engineer In Charge) |
| 334 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 335 | Bemina Site |
| 336 | Harwan Site |
| 337 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 338 | Bemina Site |
| 339 | Harwan Site |
| 340 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 341 | Bemina Site |
| 342 | Harwan Site |
| 343 | Supplying and fixing of light fittings along with connections complete as required. (Complete Job as per directions of Engineer In Charge) |
| 344 | Supply, Installation, Testing and Commissioning of Surface Mounted 48 Watt 2'x2' LED Flat Square Panel made of extruded Aluminum frame with high efficient LED & glare free opal diffuser (IP20) |
| 345 | Bemina Site |
| 346 | Harwan Site |
| 347 | Supplying, Installation, Testing and Commissioning of IP 66 Flood Light 210/ 200 watts LED light fitting complete as required |
| 348 | Bemina Site |
| 349 | Harwan Site |
| 350 | Supply, Installation, Testing & Commissioning of 8 Inch square surface mounted, 18W/22W Surface Mounted LED Downlighter (Complete Job as per directions of Engineer In Charge) |
| 351 | Bemina Site |
| 352 | Harwan Site |
| 353 | Supplying and fixing of ceiling fan of double ball bearing type, 1200 mm sweep (5 star rating) with 2.25 MFD condenser and down rod upto 1'-6\\" long on the existing fan hook with necessary connection from ceiling rose to fan using twin core copper wire.(Complete Job as per directions of Engineer In Charge) |
| 354 | Bemina Site |
| 355 | Harwan Site |
| 356 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation (Complete Job as per directions of Engineer In Charge) |
| 357 | Bemina Site |
| 358 | Harwan Site |
| 359 | Supplying and fixing 5 amps to 32 amps rating 240/415 volts, 10KA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Complete Job as per directions of Engineer In Charge) |
| 360 | Single Pole and Neutral 32 amps to 40 |
| 361 | Bemina Site |
| 362 | Harwan Site |
| 363 | Single Pole and Neutral 63 amps to 80 |
| 364 | Bemina Site |
| 365 | Harwan Site |
| 366 | Triple Pole and Neutral 100 amps |
| 367 | Bemina Site |
| 368 | Harwan Site |
| 369 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Complete Job as per directions of Engineer In Charge) |
| 370 | 6 way TPN (Double door ) |
| 371 | Bemina Site |
| 372 | Harwan Site |
| 373 | 8 way TPN (Double door) |
| 374 | Bemina Site |
| 375 | Harwan Site |
| 376 | Sheet metal enclosed 12way SPN DB complete with neutral link |
| 377 | Bemina Site |
| 378 | Harwan Site |
| 379 | Sheet metal enclosed 16way SPN DB complete with neutral link |
| 380 | Bemina Site |
| 381 | Harwan Site |
| 382 | Supplying and fixing of following sizes of heavy class PVC conduit along with accessories( Bends, Collars, Clamps, Screws etc.) in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (ISI Make) (Complete Job as per directions of Engineer In Charge) |
| 383 | 25 mm |
| 384 | Bemina Site |
| 385 | Harwan Site |
| 386 | Bemina Site |
| 387 | Harwan Site |
| 388 | Supply, installation, Testing and Commissioning of LED Indicator (Complete Job as per directions of Engineer In Charge) |
| 389 | Bemina Site |
| 390 | Harwan Site |
| 391 | Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required. (Complete Job as per directions of Engineer In Charge) |
| 392 | 1 or 2 Module (75mm X 75mm) |
| 393 | Bemina Site |
| 394 | Harwan Site |
| 395 | 4 Module (125mm X 75mm) |
| 396 | Bemina Site |
| 397 | Harwan Site |
| 398 | 6 Module (200mm X 75mm) |
| 399 | Bemina Site |
| 400 | Harwan Site |
| 401 | 8 Module (125mm X 125mm) |
| 402 | Bemina Site |
| 403 | Harwan Site |
| 404 | 12 Module (200mm X 150mm) |
| 405 | Bemina Site |
| 406 | Harwan Site |
| 407 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. (Complete Job as per directions of Engineer In Charge) |
| 408 | 1 or 2 Module |
| 409 | Bemina Site |
| 410 | Harwan Site |
| 411 | 4 Module |
| 412 | Bemina Site |
| 413 | Harwan Site |
| 414 | 6 Module |
| 415 | Bemina Site |
| 416 | Harwan Site |
| 417 | 8 Module |
| 418 | Bemina Site |
| 419 | Harwan Site |
| 420 | 12 Module |
| 421 | Bemina Site |
| 422 | Harwan Site |
| 423 | Supply and fixing of 3 pin 5/6 amp modular socket outlet with shutters and 5/6 amp modular type switch including connections and civil work excluding G.I / PVC box but including cover plates (Complete Job as per directions of Engineer In Charge) |
| 424 | Bemina Site |
| 425 | Harwan Site |
| 426 | Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch including connections and civil work excluding G.I / PVC box but including cover plates (Complete Job as per directions of Engineer In Charge) |
| 427 | Bemina Site |
| 428 | Harwan Site |
| 429 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Complete Job as per directions of Engineer In Charge) |
| 430 | Bemina Site |
| 431 | Harwan Site |
| 432 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. asrequired. 40 Amp.(Complete Job as per directions of Engineer In Charge) |
| 433 | Harwan Site |
| 434 | Supplying & laying of PVC insulated and PVC sheathed/ XLPE Aluminium armoured FRLS power cable of 1.1 KV grade of following sizes, to be carried through cable ducts/ trays (Complete Job as per directions of Engineer In Charge) |
| 435 | 185 sq.mm x 3.5 core armoured |
| 436 | Bemina Site |
| 437 | Harwan Site |
| 438 | 70 sq.mm x 3.5 core armoured |
| 439 | Harwan Site |
| 440 | 50 sq.mm x 3.5 core armoured |
| 441 | Bemina Site |
| 442 | Harwan Site |
| 443 | Supply, Installation, Testing and Commissioning of 185mm² 1.1 kV Heat Shrinkable Cable Termination Kits ( Set of 3 ) (Complete Job as per directions of Engineer In Charge) |
| 444 | Bemina Site |
| 445 | Harwan Site |
| 446 | Supply, Installation, Testing and Commissioning of 70mm² 1.1 kV Heat Shrinkable Cable Termination Kits (Set of 3 ) (Complete Job as per directions of Engineer In Charge) |
| 447 | Harwan Site |
| 448 | Supply, Installation, Testing and Commissioning of 50mm² 1.1 kV Heat Shrinkable Cable Termination Kits (Set of 3 ) (Complete Job as per directions of Engineer In Charge) |
| 449 | Bemina Site |
| 450 | Harwan Site |
| 451 | Supplying and erecting storage type water heater 25 litres capacity (ISI MARK) having standing loss <0.419 kWh / 24 hour / 45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, multi function valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification (Complete Job as per directions of Engineer In Charge) |
| 452 | Bemina Site |
| 453 | Harwan Site |
| 454 | Providing and fixing 2.0 HP ISI marked Monoblock Pump Set, Single Phase 220V AC, 50Hz, 1440 RPM, Capacitor Start Capacitor Run type, suitable for Total Head range 55 meter to 65 meter, Discharge not less than 30 LPM at 60m head, Suction x Delivery size 25mm x 25mm, having Cast Iron Pump Body, Brass Impeller, Stainless Steel Shaft, Mechanical Seal, Class-B Insulation, IP55 Enclosure Protection, Thermal Overload Protector, conforming to IS:8472 with latest amendments, mounted on common base plate with foundation bolts, complete in all respects. Make: CRI AC2-200 / Crompton Aquagold Dura 2HP / Kirloskar KDS-205+ / Texmo AHS 2HP High Head or equivalent approved make. (Complete Job as per directions of Engineer In Charge) |
| 455 | Bemina Site |
| 456 | Harwan Site |
| 457 | Making of Brick Masonary Chamber (900x900x1050) mm with RCC top slab, Cast Iron cover in CI Frame (38Kg) (Complete Job as per directions of Engineer In Charge) |
| 458 | Bemina Site |
| 459 | Harwan Site |
| 460 | Supply, Installation, Testing and Commissioning of 10 Sqmm Cable 4 Core 1.1kV Grade,Armoured, XLPE Insulated Stranded Aluminium Conductor FRLS type including thimbles,lugs,tape (Complete Job as per directions of Engineer In Charge) |
| 461 | Bemina Site |
| 462 | Harwan Site Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
