|
| 1 | Providing and Fixing Stainless steel benches of 304 grade SS welded contt fully assembled with embeded type feet 3 seater capacity as per the design approved by the Engineer in charge including the cost of embeding thefeet in concrete base after making necessary troughs. the concrete base shall be of mix M10 laid over levelling cource of M5. The cost includes the Carriage of all the materials required for the complete job.: |
| 2 | Providing and fixing designing of Leg Press of size 2000 x 550 x 1600 mm fabricated with man post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia of equipment’s etc. all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated. All pipes are welded with joints as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding point prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open end of pipe to be closed by GI/LLDPE caps for safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment’s etc. ( Complete Job) |
| 3 | Providing and fixing Air Walker of Air swing in pair of size 1100 x 550 x 1480 mm. Fabricated with man post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated. All pipes are welded with joints as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding point prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open end of pipe to be closed by GI/LLDPE caps for safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment’s etc. ( Complete Job) |
| 4 | Providing and fixing of Twister Triple bar of specified size 1400 x 1400 x 1350 mm fabricated with man post of 114 mm and 2.5 mm thick. All pipes are welded with joints as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding point prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open end of pipe to be closed by GI/LLDPE caps for safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment’s etc. ( Complete Job) |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Chequerred precast cement concrete tiles 22mm thick in footpath on 20 mm thick bed of cement mortar 1:4as per the Direwctions of Engineer -In- Charge. |
| 9 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 10 | Providing and fixing 0.5 H.P Electric Motor with (2'-6' x2.6 x2.6) feet Sized Motor Room , Complete job including all Pipes , Ball Valves etc as per the Direwctions of Engineer -In- Charge. |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 12 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking outjoints and preparing and plastering the surface of the walls completeincluding disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 13 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 14 | Removal of Excavated mulba, dismantled unserviceable material from the site of work by MT/Animal transport or other wise including loading /unloading complete job. |
| 15 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 16 | Providing and laying at or near ground level factory made kerb stone ofM-25 grade cement in position to the required line, level and curvaturejointed with cement mortar 1:3 (1 cement: 3 coarse sand) includingmaking joints with or without grooves (thickness of the joints except atsharp curve shall not to be more than 5mm) including making drainageopening wherever required complete etc. as per direction of Engineer-incharge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 17 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.Two or more coats on new work |
| 18 | Carriage of Earth by Mech. Transport from source to site of work Including loading unloading and stacking 10 km Avg. Sand and Bajree. |
| 19 | Carriage of Sand and Stone Agg. Below 40 mm by Mech. Transport from source to site of work Including loading unloading and stacking 10 km Avg. Sand and Bajree. |
| 20 | Carriage of Stone Agg. Above 40 mm by Mech. Transport from source to site of work Including loading unloading and stacking 10 km Avg. Sand and Bajree. Please Enable Macros to View BoQ information |
