Name of Work:- PWD road to Gambharipank_Road_Renewal coat SDBC,Bush cutting, raincut,signages0.000 to 0.350
Sl. No.
Item Description
1
Clearing grass and removal of rubbish up to a distance of 50m girth outside the periphery of the area etc complete asper direction of Engineer in charge.
2
Flank dressing to proper grade & camber on both side berms including T&P materials etc. complete as per direction of the Engineer in charge.
3
Clearing existing black topped surface including removal of foreign materials with wire brushes and small picks, seeeping with brooms or soft brushes and finally dustong with old gunny bags and / or compressed air to receive bituminous treatment etc complete asper direction of Engineer charge.
4
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
5
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of apecified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site laying with a hydrostic pave finisher with sensor control to the required grade level and aligjment rolling with smooth wheeled vibratory and tandom rollers to achieve the desired compaction as per clause 508 of MOSRT&H specificationf or road and bridge works (4th revision) etc complete as per specification and direction of Engineer in charge.
6
Supplying and filling moorum of approved quality including watering to complete saturation and ramming complete with all leads and lifts including cost conveyance royalty and taxes of all materials and cost of all labour and T&P required for the work etc complete as per specificationa nd direction of Engineer in charge.
7
Reinforced cement concrete M15 grade guard stone/ local stone of standard design as per IRC:25 fixed position including finishing as per drawing and technical specifiction clause of MORD ( fixing of berm) etc complete asper direction of Engineer
8
Providing fixing 200 mtr stone as per approved drawing and specification including cost of all materials T&P labour painting figuring and fixing etc complete asper direction of Engineer in charge.
9
Reinforced cement concrete M15 grade guard stone/ local stone of standard design as per IRC:25 fixed position including finishing as per drawing and technical specifiction clause of MORD ( fixing of berm) etc complete asper direction of Engineer
10
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm widthand required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural roads of required shade and colur supported and welded on 47mmx47mmx12 SWG sheet tube firly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600mm below ground level as per approved drawing clause 1701.2.2 (i) 600mm Circular
11
800mm x 600mm Rectangle
12
600mm Eqilateral and Triangle Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
