|
| 1 | HP Shaft Sealing Front as per tender schedule |
| 2 | Sealing Ring |
| 3 | Sealing Ring |
| 4 | Sealing Ring |
| 5 | HP Shaft Sealing Rear as per tender schedule |
| 6 | Sealing Ring |
| 7 | Sealing Ring |
| 8 | Sealing Ring |
| 9 | IP Shaft Sealing Rear as per tender schedule |
| 10 | Sealing Ring |
| 11 | IP Shaft Sealing Front as per tender schedule |
| 12 | Sealing Ring |
| 13 | LPC Front Shaft Sealing as per tender schedule |
| 14 | Sealing Ring |
| 15 | Sealing Ring |
| 16 | LPC Rear Shaft Sealing as per tender schedule |
| 17 | Sealing Ring |
| 18 | Sealing Ring |
| 19 | BEARING YOKE KEYS |
| 20 | Fitted Key for Brg. No. 1 Yoke bottom |
| 21 | Fitted Key for Brg. No. 1 Yoke side |
| 22 | Fitted Key for Brg. No. 2 Yoke bottom |
| 23 | Fitted Key for Brg. No. 3 Yoke bottom |
| 24 | Fitted Key for Brg. No. 3 Yoke side |
| 25 | Fitted Key for Brg. No. 4/5 Yoke bottom |
| 26 | Fitted Key for Brg. No. 4/5 Yoke side |
| 27 | Radial and Axial keys as per tender schedule |
| 28 | Fitted Key FB Pedestal |
| 29 | Fitted Key FB Pedestal |
| 30 | Fitted Key FB Pedestal |
| 31 | Fitted Key FB Pedestal |
| 32 | Fitted Key FB Pedestal |
| 33 | Fitted Key FB Pedestal |
| 34 | Fitted key for HP Rear Bearing pedestal (Radial-Fr) as per tender schedule |
| 35 | Fitted key for HP Rear Bearing pedestal (Radial-Fr) as per tender schedule |
| 36 | Fitted key for HP Rear Bearing pedestal (Axial) as per tender schedule |
| 37 | Fitted key for HP Rear Bearing pedestal (Axial) as per tender schedule |
| 38 | Fitted key for HP Rear Bearing pedestal (Radial-Rr) as per tender schedule |
| 39 | Fitted key for HP Rear Bearing pedestal (Radial-Rr) as per tender schedule |
| 40 | Fitted key ( HP REAR BRG PEDESTALS) |
| 41 | Fitted key for IP Casing Rear (Axial) as per tender schedule |
| 42 | Fitted key for IP Casing Rear (Axial) as per tender schedule |
| 43 | Fitted key for IP Casing Rear (Radial) as per tender schedule |
| 44 | Fitted key for IP Casing Rear (Radial) as per tender schedule |
| 45 | Fitted key L -196 (Radial gusset block in condenser) |
| 46 | KEY L-78 |
| 47 | Fitted key IP Inlet Insert as per tender schedule |
| 48 | Fitted key IP Inlet Insert as per tender schedule |
| 49 | Fitted key IP Extraction Connection |
| 50 | Fitted key IP Casing Assembly |
| 51 | KEY IP Casing Assembly |
| 52 | Fitted key (HP SEAL) |
| 53 | Fitted key for HP casing (Radial) |
| 54 | Fitted key for HP casing (Axial) |
| 55 | Brass Sealing Strip 8x2x845 |
| 56 | Brass Sealing Strip Roll 8x2 |
| 57 | Stud M24 X 250 for MS/HRH Strainer with hex nut & washer |
| 58 | Coupling Bolts M56 x270 for HP/IP |
| 59 | Coupling Bolt M64X335 for IP-LP |
| 60 | Clamping Piece for LP Turbine |
| 61 | Locking Plate 7th Stage for LP Turbine |
| 62 | Locking Plate 8th Stage for LP Turbine |
| 63 | Helical Compression Spring |
| 64 | Fasteners |
| 65 | Stud M52 x 220- 20 x185 Modified |
| 66 | Stud AM64 x 305- 20x248 |
| 67 | Stud AM 72x06x320 – 25x257 |
| 68 | Stud AM 72x06x520 – 25x308 |
| 69 | Stud AM 72x06x380 – 25x252 |
| 70 | Cap Nut M52 for HP inner casing |
| 71 | Cap Nut PM 64 |
| 72 | Cap Nut PM72 x 6 |
| 73 | Screw Hex M 36x180 |
| 74 | Screw Hex M 30x110 |
| 75 | MOP SPARES |
| 76 | Bearing Bush |
| 77 | MOP Impeller Ring Dia 185 |
| 78 | Governor Impeller Ring Dia 106 |
| 79 | ‘O” ring |
| 80 | Shaft check nut 30X1.5 |
| 81 | Sealing Ring . Please Enable Macros to View BoQ information |
