Tender For Comprehensive Maint, Repair To Ply Wood, Roof Sheet, Sanitary, Plumbing Etc At Nyari Under The Aor Of Ge 874 Ews.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Jul 2026
10 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maint, Repair To Ply Wood, Roof Sheet, Sanitary, Plumbing Etc At Nyari Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | M&L brick work with sub class 'B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 including demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 2 | All as per Ser Item No 1 but except brick. |
| 3 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth (without using extra lime or cement) including taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed. |
| 4 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth (without using extra lime or cement including taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed. |
| 5 | M & L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:3 finished even and smooth (without using extra lime or cement including taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed. |
| 6 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 7 | M & L preparation of new plastered surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulsion, white or tinted on walls complete all as specified and directed. |
| 8 | M & L preparation of new plastered surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulsion, white or tinted on ceiling complete all as specified and directed. |
| 9 | M & L applying two coats of cement based paint on newly plastered or un plastered wall surface including preparation of surfaces over alkali resistant priming paint complete all as specified and directed. |
| 10 | M&L for brooming down old decorated surfaces of walls, plastered or un plastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint If required putty will be measured and paid separately under respective item of BOQ complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying a uniform layer of 1mm thick wall care putty including preparation of surfaces by rubbing with appropriate size of sand paper and applying two coats of oil bound distemper (approved colour/shed) complete all as specified and directed. |
| 12 | M&L for preparation of old treated surfaces of walls, plastered or un plastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and directed. |
| 13 | M&L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and directed. |
| 14 | M & L for applying one coat of synthetic enamel paint on old steel surfaces of any description, over 10 cm width or girth including preparation of old steel surfaces complete all as specified and directed. |
| 15 | M & L for preparation of old decorated wall surfaces and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of primer complete all as specified and directed. |
| 16 | M & L for preparation of old decorated wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 17 | M & L for average 1mm thick wall care putty on wall/ceiling surfaces complete all as specified and as directed. |
| 18 | M & L two coats of synthetic enamel paint over a priming coat with red oxide over new steel surface over 10 cm width or girth complete all as specified and directed. |
| 19 | M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified and directed. |
| 20 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and directed |
| 21 | All as per srl item No 20 above but plain sheet as in roof covering /cladding to wall fixed with tapping screws. |
| 22 | M &L for second class soft wood as in scantling clean sawn fixed in position including dismantling of old timber scantlings 40 sq cm and over in sec in any position in unframed work complete all as specified and as directed. |
| 23 | M&L for 2nd class soft wood moulding as in cornices, picture rails and like, not exc. 6 sqcm in section, wrought, fixed with nails complete all as specified and directed. |
| 24 | M & L for 2nd class Clean sawn battens at 30 cm centre to centre of sectional area of 5 but not exc 15 sqcm complete all as specified and as directed |
| 25 | S&F Eaves Boarding of 20mm thick of Softwood 2nd class with nails in any situation (except flooring and skirting) , Planed one side with butt joints including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 26 | M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in walls with Nails to timber frame work all complete including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 27 | M&L 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in ceiling with nails to timber frame work including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 28 | M&L for 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling 10 to 12mm thick including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 29 | M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. Note:- The design and specification of the ceiling board to be approved by GE. |
| 30 | M&L for WPC panelling for wall/ceiling, total thickness 20 to 25 mm and base thickness 5 mm complete all as specified and as directed (as per sample kept in the office of AGE) including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 31 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 32 | M&L for 75 mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in Sub base complete all as specified and directed. |
| 33 | M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 34 | M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed. |
| 35 | M&L 80mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-40 Grade complete all as specified and directed. |
| 36 | M&L chequered cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, finished even and fair complete all as specified and directed. |
| 37 | M &L 10mm-12mm thick coloured paver tiles (Endura Tiles) of size 300 x 300mm/300mm x 450mm over a layer of 15mm thick screed bed in C.M 1 :4 joints filled with coloured cement to match including dismantling to existing etc complete all as specified and as directed. |
| 38 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 39 | M&L for 40mm thick cement concrete 1:2:4 type B-I using 20mm graded crushed stone aggregates as in floor and finished even and smooth complete all as specified and directed. |
| 40 | S&F glass dividing strips 38mm wide and 3mm thick, complete all as specified and directed. |
| 41 | M & L for providing cement concrete (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in benching, bed plates, coping, kerbs and the like including necessary formwork and finishing all exposed surface of concrete, complete all as specified and directed. |
| 42 | S& F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete including dismantling of old tiles complete all as specified and as directed. |
| 43 | S & F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirtings/dados etc including 15mm thick rendering in CM 1:4 complete including dismantling of old tiles complete all as specified and as directed. |
| 44 | S & F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete including dismantling of old tiles complete all as specified and as directed. |
| 45 | S & F double charged Vitrified Ceramic tiles (Dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete including dismantling of old tiles complete all as specified and as directed. |
| 46 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 47 | S & F Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 48 | All as per Ser Item No 47 above in skirting including 15mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 49 | M & L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite over 15mm thick screed bed or rendering in cement mortar 1:4 complete all as specified and as directed. |
| 50 | Taking down Chowkhats or frames not exc. 1.5 sqm each (without taking off shutter from frames) complete all as specified and as specified and as directed. |
| 51 | Taking down Chowkhats or frames exc. 1.5 sqm each but n exc 4.00 Sqm each (without taking off shutter from frames) complete all as specified and as specified and as directed. |
| 52 | Taking down Shutters of any description exc 1 sq. m but n exc 2 qm each complete all as specified and as specified and as directed. |
| 53 | Resecuring or easing and adjusting without taking down shutters of any description exc 1 sq. m but n exc 2 qm each complete all as specified and as specified and as directed. |
| 54 | Taking down and re-fixing in same opening shutters of any description exc 1 sq. m but n exc 2 qm each complete all as specified and as specified and as directed. |
| 55 | S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed. |
| 56 | S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed. |
| 57 | S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed. |
| 58 | S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 59 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed. |
| 60 | S&F factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick 9styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame with wood free EPS at site as per specification and drawing complete all as specified and directed. |
| 61 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, over Powder Coating to (minimum thickness of powder coating 50 micron) complete all as specified and directed |
| 62 | S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 63 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 64 | S & F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed. |
| 65 | S& F double action floor spring, hydraulically regulated, made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 66 | M&L for 12 mm thick prelaminated particle board interior grade prelaminated both side with decorative choice lamination fixed with screw to timber frame work/aluminium frame work complete all as specified and directed. |
| 67 | S& F 100mm long mortice latch with two levers (vertical type), brass body complete all as specified and as directed. |
| 68 | M&L for repairing of all type aluminium window/door shutter with frame and refixing it after resecuring its frame work by means of tightening with new screw or by new frame, cleats and refixing in the same opening including small fittings like hinges, glazing clip, rubber gasket etc complete all as specified and directed. Note : Any kind of Aluminium work to be paid in the respective item of BOQ. |
| 69 | M&L for 5.5 mm thick tinted glass fixed to aluminium frame including rubber bead complete all as specified and directed. |
| 70 | M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed. |
| 71 | M & L in repair for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane including hacking out old glass pane complete all as specified and directed. |
| 72 | S & F galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed. |
| 73 | All as per item No 72 above but fix in repair. |
| 74 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 75 | M & L for mild steel work as in roof trussed (framed) purlins crane gantries rail & fastening and heavy bracket (beam tea angle channel or flat section) including distance pieces cleats etc complete all as specified and directed. |
| 76 | S&F for mild steel framed work as in door of angle or other section with gusset plate, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Door etc, to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing including one shop coat of Zink chromate primer paint confirming to F-410W GDe-250 A complete all as specified and directed. |
| 77 | M & L for PCC 1:3:6 type B-I using 20mm graded stone aggregate as in holdfasts complete all as specified and directed. |
| 78 | Supply and fixing steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, guard bars and painting etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 and TD-220 sheet 1/3 to 3/3 as applicable complete all as specified and directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh shall be measured and paid for separately. |
| 79 | S & F 150mm aluminium handle, cast type, anodised complete all as specified and as directed |
| 80 | S & F 200mm aluminium, anodised, barrel tower bolts of extruded sections and fixed complete all as specified and as directed |
| 81 | Supply and fixing for ISI marked 250mm long aluminium alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter complete all as specified and directed. |
| 82 | S& F butt hinges ISI marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 83 | S&F for mild steel 150 mm ordinary rat tail rod pattern springs including rollers and roller plate etc complete all as specified and directed. |
| 84 | S & F in repair Stainless steel curtain rod 25mm dia fixed with decorative brackets, stop roller and glass at the end etc complete all as specified and directed. |
| 85 | S & F in repair 15mm thick PVC connection with PTMT nuts of length 600mm complete all as specified and directed. |
| 86 | M & L for Cutting chases, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified and directed. |
| 87 | M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and directed. |
| 88 | M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and directed. |
| 89 | M & L for 15mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed. |
| 90 | M & L for 20mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed. |
| 91 | S&F in repair bib taps long body 15mm dia Chromium Plated, fancy type screwed down for iron pipe and fixed complete all as specified and directed. |
| 92 | S & F in repair ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 93 | S & F in repair of ISI marked 15mm bore stop valve, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 94 | S & F in repair for 15mm bore stop valves, fancy type chromium plated with long shank and cup (concealed) type complete all as specified and directed. |
| 95 | S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 96 | S&F in repair chromium plated shower rose 125 mm size with or without swivel joints any size including to fixing to steel pipe or union complete all as specified and directed. |
| 97 | S&F in repair vitreous China white wash hand basin with pedestal white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 type complete all as specified and directed. |
| 98 | S&F in repairs vitreous China squatting pan Orrisa pattern size 580 x 440mm white with \\"P\\" and \\"S\\" trap front or back inlet etc including connection to trap and to flushing to pipe, anti syphonage pipe etc including provisioning of cement concrete complete all as specified and directed. |
| 99 | S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and directed. |
| 100 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified and directed. |
| 101 | S&F Vitreous China urinal, half stall type white (excluding flushing cistern, flush pipe) including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed \\"as in repair\\" complete all as specified and directed. |
| 102 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 103 | S&F in repair for 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative board including aluminium beading complete all as specified and directed. |
| 104 | S&F for in repair stainless steel sink without drainage board made of stainless steel 1 mm thick sheet for kitchen with waste coupling waste pipe, washer and including all necessary item including fixing to brackets and connected union to pipe complete of overall size 495 x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 105 | S&F in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified. |
| 106 | S&F in repair for 6mm thick looking mirror of size as required with bevelled edge fixed with CP nuts and screws complete all as necessary items complete all as specified and directed. |
| 107 | S&F in repair Wall Mixer with Telephone Shower Arrangement, Connecting Legs & Wall Flanges but without Crutch & Telephone Shower complete all as specified and directed. |
| 108 | S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified and directed. |
| 109 | S&F in repair Towel Rack 600mm Long with Lower Hangers, Stainless Steel including brackets complete all as specified and directed. |
| 110 | S&F in repair CP soap dish holder including fixing with brass screws to wall complete all as specified and directed. |
| 111 | S & F in repair Long Body Bib Cock with Wall Flange complete all as specified and directed. |
| 112 | S & F in repair Angular Stop Cock with Wall Flange complete all as specified and directed. |
| 113 | S&F in repair Glass Shelf 600mm Long (with bracket) including fixing with brass screws to wall complete all as specified and directed. |
| 114 | S&F in repair Single Piece WC with PP soft close seat cover, Hinges, Fixing Accessories and Accessories Set, Cistern fittings, Size: 370x690x680 mm including S trap-300mm complete all as specified and directed. Note : The contractor shall produce warranty from manufacturer before claiming payments complete all as specified and directed. |
| 115 | S&F in repair Wall Hung Basin with full pedestal with Fixing Accessories, Size: 620x480x185 mm with chromium plated waste coupling, waste pipe, PVC connection and all connected fittings complete all as specified and directed. |
| 116 | S&F in repair CP Towel ring round with all connected fittings complete all as specified and directed. |
| 117 | S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook with all connected fittings complete all as specified and directed. |
| 118 | S&F in repair 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and directed. |
| 119 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and directed. |
| 120 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 121 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing pipes complete all as specified and directed. |
| 122 | S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified. |
| 123 | M & L for 1000 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 250 but not exc 500 litres complete all as specified and directed. |
| 124 | M & L for 500 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 500 but not exc 1000 Litres complete all as specified and directed. |
| 125 | S & F of for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 126 | Demolition Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 127 | M & L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) (nominal mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 128 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 129 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender