|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge. |
| 2 | ORDINARY ROCK 20% |
| 3 | ALL KINDS OF SOIL 80% |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 5 | STONE SOLLING Dumping of stone including cost of stone (in horizontal on level) |
| 6 | Providing and laying in position cement concrete of specified grade including curing & centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Coursed rubble masonry with finished hard stone in superstructure above plinth level Square or rectangular pillars/ walls /curved on plan for a mean radius not exceeding 6 metres and upto floor five level including curing complete with : Cement mortar 1:6 (1 Cement : 6 coarse Sand) 1st Sort |
| 8 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60 mm thick (100mm X 100mm ) C.C. paver block of M-30 grade with approved color design and pattern. Cobblestone Finish Paver Block (Thickness = 60 mm) |
| 9 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab double moulded over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,Nosing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 10 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 11 | Construction of Wooden Gazeboo Including all necessary fixtures , hooks , Welding, Side Covered with 5mm thick glass Panels, Truss, Ladakhi shingstak complete job as approved by Engineer-In-Charge. |
| 12 | Supply and installation of Cast iron three seater Bench with fiber strip (FRP) & Wooden Benches Including all necessary fixtures , hooks , Welding complete job as approved by Engineer-In-Charge. |
| 13 | Stainless Steel 304 Dustbins for Garbage collection |
| 14 | Supply and Installation of Solar street Light unit, LED 100W (including panel, Lithium battery, remote control).Work includes all necessary accessories needed for fixation and any other application or materials needed to properlycomplete the works to the engineer's approval. including wiring, electrical control panells ,Base plate , Pole Foundation in M10 Grade (1:3:6) 10mm Crushed Aggregate 510 x 510 510 mm Anchor block size , Excavation , Soling below Anchor Block and all necessary fixtures , hooks complete job as approved by Engineer-In-Charge. |
| 15 | Supply and installation of Outdoor Sign Pole Cast Iron Street Sign Post Lamp Pole 3.5 M Height for park street garden ISO Certified including fixing minimum of 6 Sign Plates of appropriate size , shape and specifications , wiring, electrical control panells , lighting 70 W , Base plate , Pole Foundation in M10 Grade (1:3:6) 10mm Crushed Aggregate 510 x 510 510 mm Anchor block size , Excavation , Soling below Anchor Block and all necessary fixtures , hooks complete job as approved by Engineer-In-Charge(Note No additional payments for sign plates shall be made ) |
| 16 | Supply and Filling of Granular Sub Base Material including digging carrying lorry ramming,watering,dressing and consolidation in layer including all leads ift and carriage for avg leads up to 07 kmby MT,etc complete finishing work to be measured. |
| 17 | Providing and laying laying of M.S Pipe 150mm dia for crossing at required spot including digging trench, re-filling at top and making the road trafficable includind cement concrete inlet 1:3:6(1cement:3 coarse sand: 6 graded crushed stone agg 20mm nominal size). including all carriage from available source to site of work |
| 18 | Supply / Filling of WBM 3rd 75 mm thick with specified stone aggre.stone screening & binding material including screening sorting spreading to template and consolidation with PRR of 8 -10 tone capacity etc incl cost of sub base with stone aggre.53-20.4mm size includingb screening 11.20mm size @ 0.15/sqm and binding materilal @ 0.08/sqm including all carriage material bu MT and stacking of required size and range at site complete. |
| 19 | Prividing and Laying tack coat using hot straight run bitumen of grade 80 - 100 including heating the bitumen spraying the bitumen with mechnically operated spray unit fitted on bitumen boiler cleaning and preparing the existing road as per specification on 0.75 kg/ sqm including the cost of all involved material complete job . |
| 20 | P / Applying priming coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and and spraying primer @ 0.9-1.2 kg/sqm using mechnically means as per tech specification clause 502. |
| 21 | Providing and Laying bituminious macadam with plant 50 mm thick compacted thicness in accordance with most specified to specified line grade and corss section aggre.grading to min.size 35 % 20mm 45 % 10 mm fine aggre.with binder content of the mix 3.5 % by weight to total mix including all cost of material involved T & P lab.Octeria taxes and testing charge during excavation including cost pf bitumen and consolidation with PRR.including 0.5% for surface correction /holes/undulation complete job. |
| 22 | Providing and Laying semi dense bituminous concrete of 25 mm thick on macademized surface with specified grade crushed aggre.as per most specification ( aggre 1 mm 15 % ,10 mm 55 % fine aggre.28 % cement 2 % mixed with binder @ 5.5 % Tar in Hot mix plant laid with power finish with required level acheiving the desired density consolidation with PRR including all carriage / cost of Tar and Seal coat with binder qty of 0.60 kg/sqm complete job. |
| 23 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 24 | Providing and fixing carbon steel Rectangular Solar road Stud (Cat-Eye) Solar Panel: Monocrystalline Silicon 2.5V/1300 mah Power: 0.72 W, LED: 6Pc. , Waterproof: IP68, Colour Models: Red Flashing Please Enable Macros to View BoQ information |
