Tender For Construction Of New Oht 30,000 Litre Capacity Oht At Pups Near Main Road In Mazhavarayanallur Panchayat Srimushnam Block. Gf 2026-27
Tender Value
19.75 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
19750
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Oht 30,000 Litre Capacity Oht At Pups Near Main Road In Mazhavarayanallur Panchayat Srimushnam Block. Gf 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation & depositing on bank with an initial lead of 10 metre & initial lift of 2 metre in Hard shift clay, stiff block cotton, hard red earth shales, murrum, gravel, stoney earth, and earth mixed with small size boulders and hard gravelly soil (SS 20B) for foundation including shoring, strutting, baling out water providing danger light wherever necessary depositing the surplus earth on bank and other incedential charges etc., complete and as directed by TWAD board Officers,First depth of 2m From 0 to 2 m below GL |
| 2 | Second depth of 2m From 2m to 4 m below GL |
| 3 | Sand filling for foundation with clear river sand including cost of sand, watering ,ramming and consolidation etc complete as directed by TWAD Bord officers |
| 4 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers. |
| 5 | Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed) excluding the cost of RTS rods for reinforcement and centering, strutting, shuttering but including cost of all materials mixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating, finishing and curing etc., Complete and as directed by the TWAD Board Officers,Below 1.5m from GL |
| 6 | 0m to 1.50m below GL |
| 7 | 0m to 4.50m above GL |
| 8 | 4.50 m to 7.32 m above GL |
| 9 | 7.32 m to 10.98 m above GL |
| 10 | 10.98 m to 14.64 m above GL |
| 11 | 14.64 m to 18.30 m above GL |
| 12 | Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers. Below GL |
| 13 | From GL to 3.30m |
| 14 | From 5.30m to 6.30m above GL |
| 15 | From 8.30m to 9.30m above GL |
| 16 | From 11.30m to 12.30m |
| 17 | For Roof slab |
| 18 | Square Column Below GL |
| 19 | For GL and upto 3.30m above GL |
| 20 | 3.31m to 4.30m ht |
| 21 | 4.31m to 5.30m ht |
| 22 | 5.31m to 6.30m ht |
| 23 | 6.31m to 7.30m ht |
| 24 | 7.31m to 8.30m ht |
| 25 | 8.31m to 9.30m ht |
| 26 | 9.31m to 10.30m ht |
| 27 | 10.31m to 11.30m ht |
| 28 | 11.31m to 12.30m ht |
| 29 | Curved Surface - 11.30m to 15.30m |
| 30 | Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecification and supplied with test certificate Fe. 415 grade as per IS specification No.1786/1985 and as amended from time to time) delivery at site of work including loading, freight, unloading, stacking, transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers. |
| 31 | Painting two coats with approved cement paint over one priming coat of white cement over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers. |
| 32 | Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers. |
| 33 | Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers. |
| 34 | Providing GI ventilating Arragements mosquito proof net 50mm GI pipe ans cowl |
| 35 | 65mm Ø GI pipes for oht connection |
| 36 | 65mm Ø GM Gate valve |
| 37 | 65mm Ø GI Tee |
| 38 | 65mm Ø GI coupling |
| 39 | 65mm Ø GI Bend |
| 40 | 63 mm Ø PVC threaded coupler |
| 41 | 65mmx 50mm GI Reducer |
| 42 | 3 ply R.I sheet |
| 43 | Labour Charges for GI Pipe Connection to thr OHT ,For inlet,Outlet,Overflow and Scour Arrangements including Cutting and Threading earth work excavation & Refiilng |
| 44 | Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers |
| 45 | Earthwork excavation in all classes of soils and depositing on bank with an initial lead and lift such as sand or other loose soil, wet sand not under water silt and ordinary soil, sandy loom, and hard stiff, black cotton soil, red earth, earth mixed with |
| 46 | Filling with good river sand into foundation and basement including cost and conveyance of all materials to work site and all labourcharges for filling, watering etc., complete. |
| 47 | CC 1:4:8 mix using 40mm ISSHBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying and watering etc., complete. |
| 48 | Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Above basement |
| 49 | Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. Upto basement |
| 50 | Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. For Superstruture. |
| 51 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24) |
| 52 | Plastering in CM 1:5 ,12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 53 | Flooring with Granolithic flooring to 25mm thick using CC 1:2:4 mix using 20mm ISSHBG metal including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 54 | Painting the newly plastered wall surface with two coats of Plastic Emulsion Paint outside the building over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification. |
| 55 | Painting two coats with ready mix paint of approved colour and trade for doors & windows including cost and conveyance of all materials and all other labour charges etc., complete. |
| 56 | Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., inlcuding strutting upto 3m height using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.s angles of size 25 mm x 25mm x 3mm for boarding lai |
| 57 | Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., inlcuding strutting upto 3m height using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.s angles of size 25 mm x 25mm x 3mm for boarding lai |
| 58 | Supply and fabrication of steel including cost and conveyance of steels to worksite including labour for cutting, jointing and welding if necessary including all labour charges for dying with binding wire etc., complete. |
| 59 | Supplying Steel Door and windows as per standard specification etc Door of size 0.90mx2.10m |
| 60 | Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accessaries with TW Switch box with 5 A F . T . Switch with painting of suitable colour for Light Point and Fan Point ( For Electronic Regulator ) S D N o 18 |
| 61 | Supply and fixing of 15w CFL Lamp (spiral lamp) for existing holder on wall etc complete. |
| 62 | Supply and fixing of 16amps DP Switch with metal clod of 500v with tube connection 32Amps and netural on suitable T.W Plug plante with supplying on reeper on Either side With PWD Earthen etc. Board main switch |
| 63 | Supply and run of 2 of 6 s.qm 84/100 pvc SC Unstrenthed on condition of 1100v grade in 25mm side GI Pipe lend with both ends with necssary angles etc GI Pipe Service pipe |
| 64 | Supply and run of 2 of 6s.qm 84/103 pvc SC Unstrenthed on condition of 1100v on 7/70 GI Reducer with fuse service connection etc Service wire |
| 65 | Towards cost and supply of RCC Jolly of size 0.45*0.45m |
| 66 | Platform Earthwork excavation and depositing on bank with an intial lesd & lift in hard stiff clay, gravelly soil, shales, murrams earth mixed soil as per SS 20 B for foundation |
| 67 | Sand filling with good river sand including cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 68 | Cement concrete in 1:4:8 mix using 40 mm metal used for foundation including cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 69 | Providing FENCING POST 100 x 100 x 2100 mm including labour and hire charges for tools and cost of materials etc for 3m depth. |
| 70 | Providing GI Galvanised Mesh 2''x2'' fencing mesh including labour and hire charges for tools and cost of materials etc |
| 71 | Labour Charges for Fencing tying barbend wire with required tension including all labour charges etc.,completed. |
| 72 | Cement concrete in 1:4:8 mix using 40 mm metal used for foundation including cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 73 | Plain Cement Concrete 1:2:4 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., |
| 74 | Brick Work in Cement Mortar 1:5 using Country Bricks including cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 75 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross |
| 76 | Filling the stones in soakpit incluiding the cost and conveyance of materials 40mm |
| 77 | Filling the stones in soakpit incluiding the cost and conveyance of materials 20mm |
| 78 | Rcc Precast rings |
| 79 | Ring and RCC Cover Slab |
| 80 | Earth Excavation and depositing on bank for with an initial lead and lift in all type soil for pipe line for 63mm dia pipe |
| 81 | Supply of unlasticised 63mm OD PVC/4ksc rigid Pipes as per BIS 4985/2000 with ISI Marking to site of works A,63mm pvc/4ksc pipe |
| 82 | B,63mm coupling |
| 83 | Lowering and Laying of the 63mm dia PVC pipes and secials to trench ,laying to proper grade and alignment,jointing with PVC coupler and specials fixing with solvent cement paste etc., complete |
| 84 | Re-filling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after ipes and specials are laid and tested etc compete |
| 85 | Earth Excavation and depositing on bank for with an initial lead and lift in all type soil for pipe line for SS 20B Including reflling charges |
| 86 | 32mm PVC Male Threded Adopter |
| 87 | 63mm PVC Male Threded Adopter |
| 88 | 32mm PVC pipe 10kg per cmsq |
| 89 | 63mm PVC Pipe 6Kg |
| 90 | 32mmPVC Ball Valve Hevay |
| 91 | 63mmPVC Ball Valve Hevay |
| 92 | PVC Reducer 63mm*32mm |
| 93 | 63mm PVC Threaded End cap |
| 94 | PVC Adhesive (solution) |
| 95 | 2\\" Hose clip |
| 96 | 50mm lock |
| 97 | 100mm*100mm cement post stone 1.20m Height |
| 98 | Provision for clump set |
| 99 | Supply and fixing steel door using 1\\"&1/4\\" MS Plate inculdng cost and conveyance |
| 100 | Lock and key Arragements |
| 101 | Provision for Name Board |
| 102 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender