|
| 1 | Sub Work No.1- Providing ,Lowering , laying 350 mm dia to 110 mm dia. MS /HDPE Pipe Distribution SystemMaterial SectionManufacturing, providing and supplying spirally welded/ ERW / SAW / fabricated M.S. pipes (Commercial Quality) including procurement of plates, gas cutting to requiredsize, rolling, tack welding, assembling in suitable lengths to form pipes, welding on automatic welding machine andforming 'V' edge on both ends of pipes including all taxes(Central and local), railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores/ site, unloading, stacking, etc. complete as per IS-3589and IS-5504 as applicable as per specifications (Nonegative tolerance in thickness is permissible). Dia of Pipe : 200.00 mm (I. D.) _ 6 mm thk |
| 2 | Dia of Pipe : 300.00 mm (I. D.) _ 6 mm thk |
| 3 | Dia of Pipe : 350.00 mm (I. D.) _ 6 mm thk |
| 4 | Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all local & central taxes , transportation & freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores / site & stacking the same in closed shade duly protecting from sunrays & rains, etc. complete.315 mm dia HDPE Pipe 6Kg/cm2 |
| 5 | 280 mm dia HDPE Pipe 6Kg/cm2 |
| 6 | 200 mm dia HDPE Pipe 6Kg/cm2 |
| 7 | 180 mm dia. HDPE Pipe 6 Kg/cm2 |
| 8 | 125 mm dia. HDPE Pipe 6 Kg/cm2 |
| 9 | 110 mm dia. HDPE Pipe 6 Kg/cm2 |
| 10 | Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST levied by GOI & GOM in all respect including inspection harges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.(Note : One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below.)Class NP-III (For 2.00m.length)600 mm dia. Rubber Ring |
| 11 | 400 mm dia. Rubber Ring |
| 12 | 200 mm dia. Rubber Ring |
| 13 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete Without by pass arrangement350 mm CIDF sluice valve PN 1.0 |
| 14 | 200 mmCIDF sluice valve PN 1.0 |
| 15 | 150 mm CIDF sluice valve PN 1.0 |
| 16 | 125 mm CIDF sluice valve PN 1.0 |
| 17 | 100 mm CIDF sluice valve PN 1.0 |
| 18 | Providing structrual steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coats of anticorrosive paint and over it two coats of oil painting etc. complete. |
| 19 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. a) Double flanged specials of all diameters/Plain ended specials or plain ended branch flanged specials of all diameters. |
| 20 | b) MS barrels (pipe pieces) locally manufactured(for small quantities) |
| 21 | Providing and supplying ISI standard CI flanged/ S& S specials excluding GST levied by GOI & GOM in all respect, railway freight, insurance,unloading from railway wagon, loading into truck transport to departmental store /site, unloading tacking etc.complete.C)Plain ended/plain ended branch flanged specials350 to 600 mm dia |
| 22 | Providing and supply of Electro Fusion Fittings in accordance with BS EN- 12201/Part-3 suitable for drinking water within black/ blue colour manufactured from compounded PE-80 / PE-100 virgin polymer and compatible with PE-80 / PE-100 pipes, in pressure rating SDR11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central, state and municipal, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking, etc. complete.Collar 110 MM Dia |
| 23 | 125 MM Dia |
| 24 | 180 MM Dia |
| 25 | 200 MM Dia |
| 26 | 280 MM Dia |
| 27 | 315 MM Dia |
| 28 | Tee110x110x110 |
| 29 | 125x125x125 |
| 30 | 180x180x75 |
| 31 | 180x180x125 |
| 32 | 180x180x180 |
| 33 | 200x200x125 |
| 34 | 200x200x200 |
| 35 | 280x280x200 |
| 36 | 280x280x280 |
| 37 | 350 x350x315 |
| 38 | Reducer180x110 |
| 39 | 200x110 |
| 40 | 200x125 |
| 41 | 280x200 |
| 42 | 300x280 |
| 43 | 315x300 |
| 44 | 350x200 |
| 45 | 350x315 |
| 46 | Bend - 90o110 MM Dia |
| 47 | 125 MM Dia |
| 48 | 180 MM Dia |
| 49 | 200 MM Dia |
| 50 | 280 MM Dia |
| 51 | 315 MM Dia |
| 52 | Bend - 45o110 MM Dia |
| 53 | 125 MM Dia |
| 54 | 180 MM Dia |
| 55 | 200 MM Dia |
| 56 | 280 MM Dia |
| 57 | 315 MM Dia |
| 58 | LNPE (Tail Piece)110 MM Dia |
| 59 | 125 MM Dia |
| 60 | 180 MM Dia |
| 61 | 200 MM Dia |
| 62 | 280 MM Dia |
| 63 | 315 MM Dia |
| 64 | Supply of C. I. Mechanical Compression Collar Coupling suitable for C.I.Spun Pipes (as per - IS-536/2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.400 mm dia. |
| 65 | 350 mm dia |
| 66 | Labour Section Excavation for foundation / pipe trenches in all types sand, soil,soft murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Lift 0 to 1.5 M |
| 67 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0 to 1.5 M |
| 68 | Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-3/259)Lift 0 to 1.5 M |
| 69 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Lift 0 to 1.5 M |
| 70 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.Lift 0 to 1.5 M |
| 71 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete. |
| 72 | Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500M .etc.completed as specified.a) 5 mm to 8 mm _ Upto 250 mm dia. |
| 73 | b) Above 250mm.Upto 500mm.dia. |
| 74 | Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness.Above 5 mm. Upto 10 mm. |
| 75 | Welding in all positions with required number of runs for M.S. pipe of internally and or externally including gauging wherever necessary and other accessories fixing appurtenances in connection with pipe laying work as per specification. 6 mm thick |
| 76 | Providing and applying one coat of gamma coating or equivalent such as Dr.Bake, Krishna Conchem, Asian Paint, Atul Limited, Burger Paint, epoxy primer 50 to 60 microns thick and covering two coats of gamma coatings or equivalent such as Dr. Bake, Krishna Conchem, Asian Paint, Atul Limited,Burger Paints 30 microns thick each to new M.S. pipes and structural steel or concrete surface including repainting the surface by finishing by solvent degreasing and de-rusting by applying chemical method and scaffolding if necessary, etc. complete as per manufacturer's specifications. |
| 77 | Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 315 mm dia. HDPE Pipe 6 Kg/cm2 |
| 78 | 280 mm dia. HDPE Pipe 6 Kg/cm2 |
| 79 | 200 mm dia. HDPE Pipe 6 Kg/cm2 |
| 80 | 180 mm dia. HDPE Pipe 6 Kg/cm2 |
| 81 | 125 mm dia. HDPE Pipe 6 Kg/cm2 |
| 82 | 110 mm dia. HDPE Pipe 6 Kg/cm2 |
| 83 | Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete.350 mm CIDF sluice valve PN 1.0 |
| 84 | 200 mmCIDF sluice valve PN 1.0 |
| 85 | 150 mm CIDF sluice valve PN 1.0 |
| 86 | 125 mm CIDF sluice valve PN 1.0 |
| 87 | 100 mm CIDF sluice valve PN 1.0 |
| 88 | Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with Rubber ring in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985.Class NP-III (For 2.00m.length)600 mm dia. Rubber Ring |
| 89 | 400 mm dia. Rubber Ring |
| 90 | 200 mm dia. Rubber Ring |
| 91 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, xcluding excavation, B.B. masonry in CM 1:5 roportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.A) As above of 1.5 x 1.5 M internal size and depth upto 1.5 M with precast R.C.C slab cover. |
| 92 | As above of 1.2 x 1.2 M internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 93 | Providing & laying in situ following grade of C.C.of M:150 grade trap/granite/quartzite gneiss metal for foudation and bedding including dewatering, formwork compacting and curing etc.complete. |
| 94 | Providing and casting in situ C. C. of trap /granite/ quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be proviided and curing, etc. complete. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S, or Tor reinforcement) a) RCC Raft foundation ( M : 250 ) |
| 95 | Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel Reinforcement |
| 96 | Refilling the trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm layers with all leads & lifts including consolidation, surcharging,etc. complete. |
| 97 | Providing, installing testing and commissioning of in line battery opearated ultrasonic bulk type water meter ISO 4064 with built in data logger and GSM/GPRS modem for transfer of data communication to remote central computer as per working on following conditions and specifications. The meter shall be suitable for 50 degree C and provided with IP 68 protection class with complete immersion of water. The meter shall have battery life of min. 10 years should be able to detect the reversw flow volume and tampering. The accuracy of the meter shall be +/- 1 % of measured value including 36 months guarentee etc. complete. (with Simcard and its charges, valid for 36 months)300 mm dia. |
| 98 | Making cross connection to existing distribution main of any type including excavation, breaking and removing exiting pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores).400 mm dia. |
| 99 | Hydraulic testing of HDPE (PE material) Structured-Wall plastic piping system for non pressure underground line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position315 mm dia. HDPE Pipe 6 Kg/cm2 |
| 100 | 280 mm dia. HDPE Pipe 6 Kg/cm2 |
| 101 | 200 mm dia. HDPE Pipe 6 Kg/cm2 |
| 102 | 180 mm dia. HDPE Pipe 6 Kg/cm2 |
| 103 | 125 mm dia. HDPE Pipe 6 Kg/cm2 |
| 104 | 110 mm dia. HDPE Pipe 6 Kg/cm2 |
| 105 | Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessaryUpto 600mm. dia.(I.D.) |
| 106 | Reinstating Providing and laying in-situ M-300 grade unreinforcement plain cement concrete pavement over a prepared sub base with 43 grade cement coarse and fine agreegate (natural sand/VSI grade finely washed curshed sand ) comforming to IS 383 using fine and coarse aggregates combined gradiationas per Table 600-3 of MORTH Specification 2013 mixed in a batching and mixing plant/ non tilting mixer and Weight batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in continuous operation, finishing to lines and grades, as directed by Engineer-in-charge and curing by curing compound/ by providing cement vata in cement Mortor 1:8 @ 0.6m x 0.6m centre to centre, admeasuring 80mm at bottom and 40mm at top with depth of 75 mm and maintaing the same thruoughout curing period by any other method approved by Engineer-in-charge with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer/ concrete Batch mix plant ( Pan mixer ) etc comp. |
| 107 | Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete.A) 50 mm dia Air Valve PN -1.0 Please Enable Macros to View BoQ information |
