Tender For Providing, Lowering , Laying ,Jointing And Testing Di 200 Mm Dia K-7 Pipe Pipes & Designing, Providing, Installing, Testing And Commisioning Of 250 Mm Dia Flow Meter For Warud Village (Under Pipri & 13 Villages Rrwss) To Be Tapped From Sew
Tender Value
24.60 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
3 days left
EMD
24700
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing, Lowering , Laying ,Jointing And Testing Di 200 Mm Dia K-7 Pipe Pipes & Designing, Providing, Installing, Testing And Commisioning Of 250 Mm Dia Flow Meter For Warud Village (Under Pipri & 13 Villages Rrwss) To Be Tapped From Sewagram & 5 Villages Rrwss Under District Mining Fund
BOQ
| Sl. No. | Item Description |
| 1 | SUBWORK NO.1 :- PURE WATER RISING MAIN - PROVIDING, LOWERING , LAYING ,JOINTING AND TESTING 200 DI K7 PIPE , L=200M |
| 2 | Item No. 01 :- Excavation for foundation / pipe trenches in earth soil, of all types sand grael & soft murum, hard murum, soft rock and old cement and lime masonry foundation asphalt road etc including removing the excavated material upto a distance of 50 Metres and lifts as below, stacking and spreading as directed manual dewatering, preparing the bed for foundation & excluding backfilling etc.complete. |
| 3 | Item No. 02 :- Providing D.I. pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GOI & GOM in all respet including Third party inspection charges of TPI agency approved by MJP, including transit insurance, railway freight, unloading from railway wagon, loading into truck, Transportion to departmental store unloading, stacking, etc.completed, as directed by engineer-in- charge.(IS-8329:2000 latest version for pipes and IS 158/1969 and IS 12820/1989 or Latest edition / revision with amendments for Rubber Gasket (IS:8329:2000 latest version} |
| 4 | 200 mm dia. DI K7 |
| 5 | Item No. 03 :- Providing and supplying ISI standard D.I. specials and fittings with sealing rubber gasket of S.B.R. complete with Cast Iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of labour, material and transportation to stores, loading & unloading excluding GST levied by GOI & GOM in all respect etc.complete as per IS-9523. |
| 6 | 80 TO 300 MM DIA |
| 7 | Item No. 04 :- Lowering laying and jointing with SBR ruber gaskets D.I. S/S pipes of various classes with DI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, etc. complete. . Note : Only SBR Rubber gaskets to be used as per IS-5382 and IS-12820 |
| 8 | 200 mm dia. DI K-9 Pipe |
| 9 | Item No. 05 :- Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the conrractor. |
| 10 | 200 mm dia. DI K-9 Pipe |
| 11 | Item No. 6 :- Manufacturing Providing and supplying spirally welded , ERW , SAW fabricated M.S. Pipe ( commercial quality ) including procurement of plates , gas cutting to required size , rolling tack welding asembling in suitable lengths to form pipes , welding on automatic welding machine and forming 'V' edges on both ends of pipes , poviding and applying epoxy paint of shalimar or ciba make as per specifications including all taxes (central and local) railway fright , insurance unloading from railway wagon , loading in to truck transportation to store / site / unloading stacking etc. complete. As per specifications. |
| 12 | M.S PIPE 300 MM DIA. / 8 MM TK. |
| 13 | Item No. 7 :- Lowering , and laying in position to correct line and level including M.S. Specials with / without out coating such as distance pieces, straps, bends,takers etc.on pedestrals or chairs upon formation in trenches upon prepared formation. The rate to The rate to included loading , unloading hoisting , marginal cutting wherever required , assembling and tack welding , and transportation upto 500m etc. complete. |
| 14 | M.S PIPE 300 MM DIA. / 8 MM TK. |
| 15 | Item No. 8 :- Providing and supplying ISI standard MS specialsof required thickness with 3 coats of approved make epox paint (Shalimar,Cibaor Mahindra & Mahindra make) from insideand outside excluding all statutory duties & taxessuch as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores/site, and stacking, etc .complete. Plain ended specials or plain ended branch flanged specialsof all diameters. |
| 16 | Item No. 9 :- Welding in all positions with required number of runs, for M.S. pipes internally and/ or externally including gauging wherever necessacery, fixing appurtenances and other acessoceries in connection with pipe laying work as per specifications. |
| 17 | M.S PIPE 300 MM DIA. / 8 MM TK. |
| 18 | Item No. 10 :- Providing and applying epoxy paint of approved make ( Shalimar,cibam or mahindra & mahindra) to concrete surface of RCC ESR or GSR or any other structure including cleaning the surface by scrapping and air blower to the satiafaction of Engineer in charge necessacery scaffolding etc. complete with all leads and lifts and giving satisfactary hydraullic testing for water tightness as per IS codes. |
| 19 | MS 300 mm Dia. |
| 20 | Item No. 11 :- Providing and laying in situ Cement Concrete of trap/ granite / quartzite / neiss metal for RCC work infoundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions includingnormal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) For Road Reinstating (M-25) |
| 21 | Item No. 12 :- Providing and fixing in position steel bar reinforcement of various diameters for RCC piles,caps,footings,foundation,slabs,beams,columns,canopies,staircases,newels,chajjas,lintels,pardies,copings,fins,arches,etc.as per detailed designs,drawings and schedules,including cutting,bending, hooking the bars,binding with wires or tack welding and supporting as required etc. complete. Fe 500 |
| 22 | Item No. 13 :- Providing & making flanged joints to flanged C.I./M.S. pipes of all classes/ specials etc including cost of all jointing materials (rubber packing, nut bolt,etc) labour, hydraulic testing etc complete. |
| 23 | Item No. 14 :- Cutting and champhering of pipes of following dia including cost of all materials and labour involved etc. complete as directed by Engineer-in charge( for all class of pipes.) |
| 24 | Item No. 15 :- Providing and supplying at site ductile iron/spheroidal Graphite (S.G) iron single/double chamber tamer proof air valve without isolatong sluice valve. Valve in accourdance with BSEN 1074-4 of PN 10/16 rated,with body and bonnet of ductile iron confirming to EN 1563/IS 1865 GR. 500/7 or Gr. 400/15 floats. float guide,seat ring of stainless steel 1.4436/4.4306, seat ring gasket of WRAS approved EPDM ruber (Sitable for drinking water),internal fasteners of sainlesss steel A2 .Body& Bonnet coated inside & outside with electostaically applied epoxy powder coated blue colour (Suitalbe for drinking water) as per DIN 30677-2 and GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. Including transportation charges excluding GST levied by GOI and GOM in all respect etc. complete. (For PN 10 & 16) 80 mm |
| 25 | Item No. 16 :- Providing and fixing in position air valveshaft including providing and fixing GI MediumClass or 6 mm thick M.S. pipe shaft 2.70 Mlong over branch flange of air valve tee,providing PCC block of M-150 concrete, 150mm thick around the air valve tee includingencasing of vertical shaft in PCC M-150 asshown in type design together with providingand making flanged joints wherever requiredand fixing of air valve tee, etc. complete as pertype design and as directed by Engineer -inchargefor following diameters of pipe lines(type design attached.) |
| 26 | Item No. 17 :- Providiong Double flanged sluice valve conforming for IS - 14846 including worn gear arrangement as per test pressure stainless steel spindle, caps including inspection charges transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 27 | 300 mm dia |
| 28 | 200 mm dia |
| 29 | Item No. 18 :- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts etc. complete. (Rate for all class of valves.) |
| 30 | 300 mm dia |
| 31 | 200 mm dia |
| 32 | Item No. 19 :- Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding,ecluding excavation, BB mansonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. Complete as directed by Engineer-in-charge Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M. As above of 1.2 x 1.2 M internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 33 | Item No. 20 :- Refilling the trenches with the available excavated stuff with soft material first over pipeline and then hard material in layers with all leads and lifts including consolidation , surcharging etc. complete. |
| 34 | Item No.21:- Dismantling of ESRs of various capacities and heights using crane (10 MT capacity ) and handing over M.S./ C.I./G.I. pipes, valves, bends, etc. to the Department. Howevertaking steel reinforcement by the dismantling agency including removing dismantledmaterials from site and disposing the mat suitable place as directed, etc .complete |
| 35 | SUBWORK NO. 02 :- Designing, Providing, Installing, Testing & Commissioning of Flow Meter 250 mm dia on Pure Water Gravity Main |
| 36 | ITEM NO. 1 : FULL BORE - ELECTROMAGNETIC FLOW METER - Supply,install and commission Electromagnetic Flow Meter (EMF) As PerI SO4064, for Raw / Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100 mm-1000 mm including sensor, transmitter surgearrestor, cable GI duct if suitable size for 25mtrs built in GSM (with Simcard and its charges, valid for 36 months ) including the pipe cutting ,leveling and installation off low meter in the pipe lines with necessary tool tackles ,cranes including 36 months guarantee etc complete, asmay bere quired at site & based on technical specifications (Annexure-A) - 250 mm dia Errected on 300 mm dia Pipe for Warud Village |
| 37 | ITEM NO. 2 :SENSOR / TRANSMITTER CABLE - Providing, laying and jointing with test and trail of sensor / Transmitter cable 3 x 0.38 sqmm PVC cable common, braided copper shield etc. as per detailed specification. |
| 38 | ITEM NO. 3 : COIL CABLE :- Providing, laying and jointing with test and trail of coil cable 3 x 0.75 sqmm PVC cable common, braided copper shield etc. as per detailed specification. 25 mtr x 21 |
| 39 | ITEM NO 4 :- EXCAVATION FOR CHAMBER & METER FIXING - Excavation for Foundation/ pipe trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material up to a distance of 50 mtr. And lift 1.5 mtr. Stacking and spreading as directed, manual dewatering preparing the bed for foundation and as per detailed specification. Size : 2.5 x 1.5 x 1.5 (Average) .This escavation for fixing of Meter,Stainer,Distance Pieces |
| 40 | ITEM NO. 5 : MS PIPES AND SPECIALS - Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking, etc. complete.. |
| 41 | ITEM NO. 6 : MECHANICAL JOINTS AND FITTINGS - 250 mm dia Mechanical joints |
| 42 | ITEM NO. 7 : RCC VALVE CHAMBERS - Providing and constructing RCC valve chamber with 15 cm thick 1:2:4 proportion PCC bedding, RCC raft including, excavation, RCC slab cover, etc. complete as directed by Engineer-in-charge. |
| 43 | ITEM NO. 8 : Solar Power with Battery - Supply,install and commission of Solar Power with Battery , etc. complete as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender