Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Cost of curbing Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec No.Bd.A.1 Page No 259 SSR I.No. 21.02 P.No. 189 |
| 2 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.: Bd.E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 3 | Providing and casting in situ cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With natural sand. Spec. No. : Bd.E.4 Page No. 289 and B-7, Page No.38SSR I.No. 24.10 P.No. 176SSR I.No. 24.08 P.No. 176 |
| 4 | Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.SSR I.No. 32.01 P.No. 209 |
| 5 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.Spec. No. : As directed by Engineer Incharge.SSR Item No. 35.25 P. No. 277 |
| 6 | Royalty charges for supplying material items like Sand, Metal, Soling & Murum etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22Sand 211.95+4.23+21.19 = 237.37 |
| 7 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concret Cube |
| 8 | Steel |
| 9 | Cost of FountainExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259SSR I.No. 21.02 P.No. 189 |
| 10 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical MeansSpec No.Bd.A.3 Page No 259 SSR I.No. 21.06 P.No. 190 |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.: Bd.E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering,formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.3 Page No. 298 and B.7, Page No.38SSR I.No. 25.11 P.No. 219 |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38SSR I.No. 25.31 P.No. 221Ground Floor |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.6 Page No. 300 and B.7, Page No.38SSR I.No. 25.50 P.No. 223Ground Floor |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite / gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying /pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)SSR I.No. 26.17 P.No. 185Ground Floor |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping,compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newlylaid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSIGrade finely washed etc)SSR I.No. 26.29 P.No. 187Ground Floor |
| 17 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Spec. No. : Bd.F.17 Page No. 306SSR I.No. 26.33 P.No. 233Ground Floor |
| 18 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortarincluding cement float, filling joint with white/colour cement slurrycleaning curing etc. complete.(S.S.R.I.No.33.25 P. No. 215) |
| 19 | Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.(S.S.R.I.No. 33.26 P. No. 215) |
| 20 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.Spec. No. : As directed by Engineer Incharge.SSR Item No. 35.25 P. No. 277Ground Floor |
| 21 | Fountain Accesorios |
| 22 | Royalty charges for supplying material items like Sand, Metal, Soling & Murum etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22Sand 211.95+4.23+21.19 = 237.37Other Material 211.95+4.23 = 216.18 |
| 23 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concret Cube |
| 24 | Steel |
| 25 | Cost of Compound Wall Entrance GateExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259SSR I.No. 21.02 P.No. 189 |
| 26 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical MeansSpec No.Bd.A.3 Page No 259 SSR I.No. 21.06 P.No. 190 |
| 27 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.: Bd.E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 28 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering,formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.3 Page No. 298 and B.7, Page No.38SSR I.No. 25.11 P.No. 219 |
| 29 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38SSR I.No. 25.31 P.No. 221Ground Floor |
| 30 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.6 Page No. 300 and B.7, Page No.38SSR I.No. 25.50 P.No. 223Ground Floor |
| 31 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Spec. No. : Bd.F.17 Page No. 306SSR I.No. 26.33 P.No. 233Ground Floor |
| 32 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer incharge and BDG2 & 5.Spec. No. : As director by engineer in charge SSR I.No. 27.15 P.No. 243Ground Floor |
| 33 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Spec. :Bd.L .2 Page No. 368SSR I.No. 32.03 P.No. 256Ground Floor |
| 34 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colourand shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.)Spec.One Number: As directed by Engineer- in-charge.Spec. No. : As directed by Engineer Incharge.SSR Item No. 23.09 P.No. 213Ground Floor |
| 35 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.Spec. No. : As directed by Engineer Incharge.SSR Item No. 35.25 P. No. 277Ground Floor |
| 36 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.SSR Item No. 40.01 P. No. 329SSR Item No. 40.01 P. No. 329Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 37 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.SSR Item No. 23.02 P. No. 212 |
| 38 | Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours. including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix). sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm. the exposed surface thereof shall have Stove lacquered finishing coat not less than (26+2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the SSR Item No. 51.235 P. No. 416 |
| 39 | Royalty charges for supplying material items like Sand, Metal, Soling & Murum etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22Sand 211.95+4.23+21.19 = 237.37Other Material 211.95+4.23 = 216.18 |
| 40 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concrete Mix Design (With all Tests on basic materials) |
| 41 | Concret Cube |
| 42 | Brick |
| 43 | Cost of PlantationPreparing Lawn:- Excavating the ground to a required depth of 30 cms., removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manuar in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden soil and manure throughly, well levelling, watering on previous night, planting required variety of lawn grass as directed and maintaining till well established by watering, wedding, clipping, rolling etc. complete. ( D.S.R. Garden I.No. 1 ) |
| 44 | Planting large flowering /Shady trees : Digging pit with size 0.9mx0.9mx0.9m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30 m. and remaining height f 0.60 m. with fresh garden soil and manure thoroughly (well levelling as directed, watering previous night, Planting one or two year old healthy trees sapling as per specifications. Maintaining till well established by watering, weeding, stirring of soil replacing of casualty's etc, complete.( D.S.R. Garden I.No. 12 ) |
| 45 | Planting small and medium size ornamental/Flowering Plant : Digging pit with size 0.6mx0.6mx0.6m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil & Farm yard Manure upto a height of 0.60m in 3:1 proportion. Mixing soil and Manure thoroughly well, levelling watering on previous night Planting one or two year old healthy plant saplings as per specification. Maintaining till well established by watering, strring, of soil and manure, replacing casualties, etc, complete. ( D.S.R. Garden I.No. 13 ) |
| 46 | Preparing flower Bed:- Excavating the ground to the required depth of 30 cms., removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manuar in excavated area in 2:1 proportion to a height of 30 cms. for Mixing garden soil and manure throughly, well levelling, watering on previous night, planting seedlings of required anuals 25 cms a part. maintaining till well established by watering, wedding, clipping, rolling etc. complete. ( D.S.R. Garden I.No. 6 ) |
| 47 | Mogra Plant/Creepers/Climbers : Excavating pit with size 0.3x0.3x0.3 m. removing and conveying unwanted stuff to a required distance as directed.Filing the pit with approved excavated material upto height of 0.15 Mtr.anx remaning heigh of 0.15 mtr. with fresh garden soil and manure in 3:1 proportion. Mixing soil and manure thoroughly well levelling wtering on previous night Planting one or two year old healthy plnt as per specifications. Maintaining till well established by watering, weeding prunning, stiring, replacing casualties etc, complete.( D.S.R. Garden I.No. 10 ) |
| 48 | Rose Plant : Excavating pit with size 0.3x0.3x0.3 m. removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure thoroughly well, levelling watering on previous night Planting 40 to 50cms. height healthy plant of required rose variety. Maintaining till well established by watering, weeding string prunning, replacing the casualties etc, complete.( D.S.R. Garden I.No.9 ) |
| 49 | Preparing Edging or Border:- Excavating the ground to the required depth of 20 cms.,in the removing & conveying unwanted stuff to the required distance as directed. Filling the excavated part with fresh soil & manuar in excavated area in 3:1 proportion to a height of 20 cms. Mixing , levelling, watering the same planting unrooted cuttings at distance of 15 cms a part watering and maintaining till well grown the stage of prunning. ( D.S.R. Garden I.No.4 ) |
| 50 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.SSR I.No. 2.11 P.No. 23 |
| 51 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305SSR I.No. 2.25 P.No. 24 |
| 52 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete.SSR I.No. 2.29a Page No. 25 |
| 53 | Spreading hard murum for side width etc.complete SSR I. No. 2.30 P.No. 25 |
| 54 | Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.SSR I.No. 2.31 P.No. 25 |
| 55 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density.Grading II (Using Screening Type B (11.2 mm) Aggregate)SSR I.No. 3.20 P.No. 29 |
| 56 | Provinding and laying, Mixing, & spreading Wearing Cource consisting of aggreegates of half burned crushed bricks, red bajari, brick dust, tank silt/riversilt/mud morter in 1:3 prop.asper directed by Engineer in Charge etc. complete.SSR I.No. 2.29a Page No. 25 |
| 57 | Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 58 | Royalty Charges |
| 59 | Cost of Watchman CabinExcavation for foundation in earth, soil of all types, sand, gravel and soft murum,including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Spec. No. Bd.A.1 Page No. 259, SSR I.No.21.02 (SSR I.No. 21.02, P No. 153 ) |
| 60 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means Spec. No.Bd.A.2 Page No. 259, (SSR I.No.21.08, P No. 154 ) |
| 61 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means Spec. No.Bd.3.4 Page Number 259, (SSR I.No. 21.12, P No. 154 ) |
| 62 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete.As directed by Engineer in charge. (SSR I.No.21.40 , P No. 157 ) |
| 63 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water , formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand Spec. No. CD.-3 Page.No. 160. (SSR I.No.24.01 P.No. 175 ) |
| 64 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No. Bd.F.3 Page No. 298 and B.7, Page No.38, (SSR I.No.25.11 P.No. 178 ) |
| 65 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.5 Page No.300 and B.7,Page.No. 38. (SSR I.No.25.31, P No. 179 )Ground Floor |
| 66 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) .Bd.F.6 Page No.300 and B.7,Page No.38. (SSR I.No.25.50, P No. 181 )Ground Floor |
| 67 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)Spec. No. Bd.F.8 Page No.302 and B.7,Page No.38. (SSR I.No. 25.70, P No. 182 )Ground Floor |
| 68 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306. (SSR I.No. 26.33 , P No. 188 )Ground Floor |
| 69 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer incharge and BDG2 & 5. (SSR I.No.27.12 P.No. 198 )Ground Floor |
| 70 | Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. : Bd.A. 11/Page No. 263. (SSR I.No.21.37, P No. 157 ) |
| 71 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No. Bd.A. 11 Page No.262. (SSR I.No.21.36, P No. 157 ) |
| 72 | Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) As directed by engineer in charge (SSR I.No.27.15, P No. 198 )Ground Floor |
| 73 | Providing and fixing chicken mesh of 22 gauge, wi th about 30 cm. width at the junct ion of R.C.C members and br ick work, of approved quali ty including fixing mesh in posi t ion by necessary drilling in concrete / B.B.masonry and or tying by binding wire etc. complete. Spec. No. As directed by Engineer in Charge: (SSR I.No.32.26 , P No. 210 )Ground Floor |
| 74 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. BdL 2 Page No.368. (SSR I.No.32.04, P No. 209 )Ground Floor |
| 75 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. As directed by Engineer in charge. SSR I.No.32.34 ( SSR I.No.32.34, P No. 212 )Ground Floor |
| 76 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking outgrains and curing for fourteen days scaffolding etc.complete. (SSR I.No.32.04, P No. 209 )Ground Floor |
| 77 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc. complete) frame size 60 mm x 100 mm . [ ] ( SSR I.No.39.56, P No. 257 )Ground Floor |
| 78 | Solid Core Flush door Single leafProviding and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter As directed by Engineer in charge. (SSR I.No. 51.60, P No.368 )Ground Floor |
| 79 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/ Rmt . with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/ Rmt .. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/ Rmt . The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/ Rmt . Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/ Rmt . and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/ Rmt . As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. With Color anodizing with box. Spec. No. As directed by engineer incharge. (SSR I.No.39.41, P No.253 ) |
| 80 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring. Spec. No. Bd.M.12 Page No. 385. (SSR I.No.33.42, P No.217 )Ground Floor |
| 81 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting. Spec. no. Bd.M. 12 Page Number385 (SSR I.No.33.43, P No. 217 )Ground Floor |
| 82 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat , scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary DSR Item I.No. (SSR I.No. 35.26, P No. 225 )Ground Floor |
| 83 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. Spec. No. Bd.P.6 Page Number 414 and Pre-approval of Superintending Engineer SSR I.No. (SSR I.No. 36.14, P No. 228 )Ground Floor |
| 84 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concret Cube |
| 85 | Steel |
| 86 | Brick |
| 87 | Cost of Water tankExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259SSR I.No. 21.02 P.No. 189 |
| 88 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical MeansSpec No.Bd.A.3 Page No 259 SSR I.No. 21.06 P.No. 190 |
| 89 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.: Bd.E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 90 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering,formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.3 Page No. 298 and B.7, Page No.38SSR I.No. 25.11 P.No. 219 |
| 91 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38SSR I.No. 25.31 P.No. 221Ground Floor |
| 92 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.6 Page No. 300 and B.7, Page No.38SSR I.No. 25.50 P.No. 223Ground Floor |
| 93 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite / gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying /pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)SSR I.No. 26.17 P.No. 185Ground Floor |
| 94 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)Spec. No. Bd.F.8 Page No.302 and B.7,Page No.38. (SSR I.No. 25.70, P No. 182 )Ground Floor |
| 95 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Spec. No. : Bd.F.17 Page No. 306SSR I.No. 26.33 P.No. 233 |
| 96 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer incharge and BDG2 & 5.Spec. No. : As director by engineer in charge SSR I.No. 27.15 P.No. 243Ground Floor |
| 97 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.SSR I.No. 32.03 P.No. 256Ground Floor |
| 98 | Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.(using 100% crushed sand)Spec. No. : As directed by Engineer Incharge.SSR I.No. 33.54, P.No. 219Ground Floor |
| 99 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.Spec. No. : As directed by Engineer Incharge.SSR Item No. 35.25 P. No. 277Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coatsIncluding necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.SSR I.No. 41.10 P.No. 266 |
| 100 | Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coatsIncluding necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.SSR I.No. 41.10 P.No. 266 |
| 101 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.SSR I.No. 41.40 P.No. 270 |
| 102 | Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. (SSR I.No.32.21, P No. 210 ) |
| 103 | Royalty charges for supplying material items like Sand, Metal, Soling & Murum etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22Sand 211.95+4.23+21.19 = 237.37 |
| 104 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concret Cube |
| 105 | Brick |
| 106 | Cost of Garden LibraryExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259SSR I.No. 21.02 P.No. 189 |
| 107 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical MeansSpec No.Bd.A.3 Page No 259 SSR I.No. 21.06 P.No. 190 |
| 108 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.: Bd.E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 109 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering,formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.3 Page No. 298 and B.7, Page No.38SSR I.No. 25.11 P.No. 219 |
| 110 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38SSR I.No. 25.31 P.No. 221Ground Floor |
| 111 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Spec. No. : Bd.F.17 Page No. 306SSR I.No. 26.33 P.No. 233 |
| 112 | Providing and fixing colour coated Zincalume(R) AZ150 (min150gms/sq.mt.total one ach side )profiled sheets for roofing. The feed materialis manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5mm TCT), Hi-strength steel with min. 550 M Payields trength, metal lichot dip coated with Aluminium-Zincalloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND(R)steel quality super durable polyester paint coat (within organic pigment). The paint shall have at otal coating thickness of nominal 35 um,comprising of nominal 25 umexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050mm effective cover width and nominal 25-30mm deeprib swith sub tlesquar eflutingin the five panat nominal 180-250mm center-to-center.The endrib shall bedesigned foranti-capillary groove. and returnleg.The feed materials houldhave coil manufacturers product details markeda regularin terval. Including fasteners with min. fastened with min.25umZinc-Tinalloy coated,Hexhead,self-drilling screw etc.complete. (weight of profile 4.52 Kilogram/ One Square Metre)Spec. No. : As director by engineer in charge SSR Item No. 38.34 P.No. 236Ground Floor |
| 113 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.SSR Item No. 23.02 P. No. 212Ground Floor |
| 114 | Book Case with Glass Shutter @ 825Lx300Dx1650 HT Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:-To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing.Spec. No. : As directed by Engineer Incharge.SSR Item No. 23.09 P.No. 213Ground Floor |
| 115 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concret Cube |
| 116 | Cost of Playing EquipmentProiding & fixing Circular Jungle Jim is made of strong steel pipes 6ft. High and 5ft. Diameter. Brightly painted with foundation rods etc. complete |
| 117 | Proiding & fixing Doubble seater Swing is 10ft. High and 14ft. Long, made of strong steel pipes, thick polished chains fitted to three seats.Brightly painted with foundation rods etc. complete |
| 118 | Proiding &fixing Sea Saw Boards etc. complete |
| 119 | Providing merri go ground etc complete. |
| 120 | Providing & fixing Bridge ledder is fabricated with stron steel pipes 10 ft. long 7ft. High. Brightly painted with foundation rods etc. |
| 121 | Proiding &fixing Baby slider etc. complete |
| 122 | Proiding & fixing Garden Benches is made of all steel. Accommodates 5to 6 persons. Brightly painted with foundation rods etc. complete |
| 123 | Proiding & fixing Garden Uumberilla etc. complete |
| 124 | Cost of Bio-ToiletExcavation for foundation in earth, soil of all types, sand, gravel and soft murum,including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Spec. No. Bd.A.1 Page No. 259, SSR I.No.21.02 (SSR I.No. 21.02, P No. 153 ) |
| 125 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means Spec. No.Bd.A.2 Page No. 259, (SSR I.No.21.08, P No. 154 ) |
| 126 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means Spec. No.Bd.3.4 Page Number 259, (SSR I.No. 21.12, P No. 154 ) |
| 127 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete.As directed by Engineer in charge. (SSR I.No.21.40 , P No. 157 ) |
| 128 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water , formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand Spec. No. CD.-3 Page.No. 160. (SSR I.No.24.01 P.No. 175 ) |
| 129 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No. Bd.F.3 Page No. 298 and B.7, Page No.38, (SSR I.No.25.11 P.No. 178 ) |
| 130 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.5 Page No.300 and B.7,Page.No. 38. (SSR I.No.25.31, P No. 179 )Ground Floor |
| 131 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) .Bd.F.6 Page No.300 and B.7,Page No.38. (SSR I.No.25.50, P No. 181 )Ground Floor |
| 132 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)Spec. No. Bd.F.8 Page No.302 and B.7,Page No.38. (SSR I.No. 25.70, P No. 182 )Ground Floor |
| 133 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306. (SSR I.No. 26.33 , P No. 188 )Ground Floor |
| 134 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer incharge and BDG2 & 5. (SSR I.No.27.12 P.No. 198 )Ground Floor |
| 135 | Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. : Bd.A. 11/Page No. 263. (SSR I.No.21.37, P No. 157 ) |
| 136 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No. Bd.A. 11 Page No.262. (SSR I.No.21.36, P No. 157 ) |
| 137 | Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) As directed by engineer in charge (SSR I.No.27.15, P No. 198 )Ground Floor |
| 138 | Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) ( SSR I.No.27.16, P No. 198 )Ground Floor |
| 139 | Providing and fixing chicken mesh of 22 gauge, wi th about 30 cm. width at the junct ion of R.C.C members and br ick work, of approved quali ty including fixing mesh in posi t ion by necessary drilling in concrete / B.B.masonry and or tying by binding wire etc. complete. Spec. No. As directed by Engineer in Charge: (SSR I.No.32.26 , P No. 210 )Ground Floor |
| 140 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. BdL 2 Page No.368. (SSR I.No.32.04, P No. 209 )Ground Floor |
| 141 | Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. (SSR I.No.32.21, P No. 210 ) |
| 142 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking outgrains and curing for fourteen days scaffolding etc.complete. (SSR I.No.32.04, P No. 209 )Ground Floor |
| 143 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc. complete) frame size 60 mm x 100 mm . [ ] ( SSR I.No.39.56, P No. 257 )Ground Floor |
| 144 | Solid Core Flush door Single leafProviding and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter As directed by Engineer in charge. (SSR I.No. 51.60, P No.368 )Ground Floor |
| 145 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc.complete As directed by engineer incharge. (SSR I.No.40.01, P No.257 )Ground Floor |
| 146 | Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.. Spec. No. : Bd.U. 1 Page No. 537. (SSR I.No.39.68 , P No. 259 )Ground Floor |
| 147 | Providing and fixing in position Anodised aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No. As directed by Engineer in charge. (SSR I.No.41.03, P No. 264 )Ground Floor |
| 148 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/ Rmt . with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/ Rmt .. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/ Rmt . The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/ Rmt . Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/ Rmt . and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/ Rmt . As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. With Color anodizing with box. Spec. No. As directed by engineer incharge. (SSR I.No.39.41, P No.253 ) |
| 149 | Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ - including ponding test etc. complete. As directed by Engineer in charge. (SSR I.No.31.05, P No.205 ) |
| 150 | Providing and laying in position flooring of telephone black / Amba White / Catbary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No. Bd.M. 3 B/Page No. 380. (SSR I.No.33.34 , P No. 216 ) |
| 151 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring. Spec. No. Bd.M.12 Page No. 385. (SSR I.No.33.42, P No.217 )Ground Floor |
| 152 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Bd. M-12 page No. 385 (SSR I No 33.67, P No. 220 )Ground Floor |
| 153 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat , scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary DSR Item I.No. (SSR I.No. 35.26, P No. 225 )Ground Floor |
| 154 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. Spec. No. Bd.P.6 Page Number 414 and Pre-approval of Superintending Engineer SSR I.No. (SSR I.No. 36.14, P No. 228 )Ground Floor |
| 155 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.SSR I.No. 42.55 P.No. 280 |
| 156 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.SSR I.No. 42.56 P.No. 280 |
| 157 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.SSR Item No. 41.63 P. No.272 |
| 158 | Providing and fixing Orissa type white glazed earthenware water closet pan of size 260mm x 440mm x 580mm with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete.SSR Item No. 48.42 P. No.316 |
| 159 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete.SSR I.No. 42.67 P.No. 281 |
| 160 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.SSR I.No. 41.45 P.No. 270 |
| 161 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc complete. SSR I.No. 42.52 P.No. 209 |
| 162 | Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. completeSSR I.No. 43.25 P.No. 290 |
| 163 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersSSR I.No. 42.54 P.No. 280 |
| 164 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concret Cube |
| 165 | Steel |
| 166 | Brick |
| 167 | Cost of Open Gym EquipmentSupply & installation gym equipment 1.) AIR WALKER2.) STANDING TWISTER3.) SEATING TWISTER4.) LEG PRESSSpec No.Bd.A.1 Page No 259 |
| 168 | Supply & installation Doubble Bar gym equipment |
| 169 | Supply & installation Cross Trainner Single |
| 170 | Cost of Sanitiry (TREE)Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Spec No. BD.V 5 page551 and as directed by Engineer in chargeSSR I.No. 42.61 P.No. 205 |
| 171 | Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Spec No.BD.V 5 page551 and as directed by Engineer in chargeSSR I.No. 42.63 P.No. 205 |
| 172 | Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Spec No.BD.V 5 page551 and as directed by Engineer inchargeSSR I.No. 42.65 P.No. 205 |
| 173 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.Spec No.BD.V 5 page551 and as directed by Engineer in chargeSSR I.No. 42.55 P.No. 204 |
| 174 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.Spec No.BD.V 5 page551 and as directed by Engineer inchargeSSR I.No. 42.57 P.No. 204 |
| 175 | Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.Spec No.BD.V 5 page551 and as directed by Engineer in chargeSSR I.No. 42.59 P.No. 204 |
| 176 | Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut completeSpec No.Bd.V.9 Page Number 555SSR I.No. 41.43 P.No. 197 |
| 177 | Providing and fixing 40mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Withoutchamber].Spec No.Bd.V.7 Page Number 554SSR I.No. 41.29 P.No. 196 |
| 178 | Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.Spec No.As directed by Engineer incharge.SSR I.No. 42.36 P.No. 202 |
| 179 | Cost of GazebooExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259SSR I.No. 21.02 P.No. 189 |
| 180 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical MeansSpec No.Bd.A.3 Page No 259 SSR I.No. 21.06 P.No. 190 |
| 181 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.: Bd.E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 182 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering,formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.3 Page No. 298 and B.7, Page No.38SSR I.No. 25.11 P.No. 219 |
| 183 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38SSR I.No. 25.31 P.No. 221Ground Floor |
| 184 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR I.No. 25.50 P.No. 223Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38SSR I.No. 25.50 P.No. 223Ground Floor |
| 185 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Spec. No. : Bd.F.17 Page No. 306SSR I.No. 26.33 P.No. 233Ground Floor |
| 186 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer incharge and BDG2 & 5. (SSR I.No.27.12 P.No. 198 )Ground Floor |
| 187 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.SSR I.No. 33.35 P.No. 216Ground Floor |
| 188 | Providing and fixing colour coated Zincalume(R) AZ150 (min150gms/sq.mt.total one ach side )profiled sheets for roofing. The feed materialis manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5mm TCT), Hi-strength steel with min. 550 M Payields trength, metal lichot dip coated with Aluminium-Zincalloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND(R)steel quality super durable polyester paint coat (within organic pigment). The paint shall have at otal coating thickness of nominal 35 um,comprising of nominal 25 umexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050mm effective cover width and nominal 25-30mm deeprib swith sub tlesquar eflutingin the five panat nominal 180-250mm center-to-center.The endrib shall bedesigned foranti-capillary groove. and returnleg.The feed materials houldhave coil manufacturers product details markeda regularin terval. Including fasteners with min. fastened with min.25umZinc-Tinalloy coated, Hexhe Spec. No. : As director by engineer in charge |
| 189 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.Spec. :Bd.L .2 Page No. 368SSR Item No. 23.02 P. No. 212Ground Floor |
| 190 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concret Cube |
| 191 | Cost of StageExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259SSR I.No. 21.02 P.No. 189 |
| 192 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical MeansSpec No.Bd.A.3 Page No 259 SSR I.No. 21.06 P.No. 190 |
| 193 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.: Bd.E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 194 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering,formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.3 Page No. 298 and B.7, Page No.38SSR I.No. 25.11 P.No. 219 |
| 195 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38SSR I.No. 25.31 P.No. 221Ground Floor |
| 196 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.6 Page No. 300 and B.7, Page No.38SSR I.No. 25.50 P.No. 223Ground Floor |
| 197 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR I.No. 26.33 P.No. 233Ground Floor |
| 198 | Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. : Bd.A. 11/Page No. 263. (SSR I.No.21.37, P No. 157 )Ground Floor |
| 199 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer incharge and BDG2 & 5.Spec. No. : As director by engineer in charge SSR I.No. 27.15 P.No. 243Ground Floor |
| 200 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Spec. :Bd.L .2 Page No. 368SSR I.No. 32.03 P.No. 256 |
| 201 | Providing and fixing mild steel grill railing 20 kg/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.Spec. No. : As directed by Engineer Incharge.SSR Item No. 40.03 P.No. 264Ground Floor |
| 202 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.Spec. No. : As directed by Engineer Incharge.SSR Item No. 35.25 P. No. 277Ground Floor |
| 203 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.SSR I.No. 33.35 P.No. 216 |
| 204 | Royalty charges for supplying material items like Sand, Metal, Soling & Murum etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22Sand 211.95+4.23+21.19 = 237.37 |
| 205 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc complete.Spec. No. : As directed by Engineer Incharge.Rate As Per DSR 2021-22 / Vigilance & Quality Control Circle Concrete Mix Design (With all Tests on basic materials) |
| 206 | Concret Cube |
| 207 | Brick |
| 208 | Electrification Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
