Tender For Comprehensive Maintenanace Of B/R Woks In Aor Of Age B/R-I At Ge(W) Bareilly.
Tender Value
42 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenanace Of B/R Woks In Aor Of Age B/R-I At Ge(W) Bareilly.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar complete all as specified and directed |
| 2 | Taking down cement plaster from brick wall/concrete surfaces including racking out joints hacking for key and scrubbing down with water complete all as specified and directed |
| 3 | M & L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 Mtr mean radius built in CM (1:6) complete all as specified and directed |
| 4 | Removing Cement mortar or cement lime mortarr from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed |
| 5 | All as per item no 3 above but expect bricks complete all as specified and directed |
| 6 | M & L in repair Galvalised mild steel wire netting of chicken wire mesh 0.46 mm nominal dia of wire & 10 mm mesh size all as spd fixed to wallsroof etc &complete all as specified and directed |
| 7 | M&L for 15mm thick rendering on surfaces of brick work or stone walling in CM 1:6 finishing the surface fair & even complete all as spfd and directed. |
| 8 | M&L for 15mm thick rendering on brick work or concrete surface in CM 1:4 mixed with WPC and finishing the surface fair & even complete all as spfd and directed. Note:- WPC shall be measured and paid saperately. |
| 9 | M&L for rendering 10 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement icomplete all as specified and directed |
| 10 | Supply only integral water proofing compound |
| 11 | M&L for preparation of newly plastered surfaces of wall and applying two coat white wash complete all as specified and directed |
| 12 | M&L two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces, complete all as spfd and directed. |
| 13 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over & including a coat of white cement wash.complete all as specified and directed |
| 14 | M&L for preparation of plastered new surfaces of walls and applying two coats of distemper (washable) oil emulsion paint on walls complete all as specified and directed. |
| 15 | Cutting of tree from wall or roof of building n.exc 30 cm girth taking out tree trunk portion completely from wall/roof, digging out roof and making good distusbed surface with brick work in CM 1:4 or filling PCC 1:2:4 type B1 using 20mm add stone aggegate(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge ( Necessary scafolding shall be included in the cost ) |
| 16 | M&L providing PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed plates coping, padding complete all as spd & directed(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge ( Necessary scafolding shall be included in the cost ) |
| 17 | M&L Cutting out cracks to 'V' section in existing roof or terraces cleaning out wetting groves and suppling and filling cement mortar in CM (1:3) complete .(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge ( Necessary scafolding shall be included in the cost ) |
| 18 | M& L for Screed bed 10mm thick in CM (1:4) over roof slab mixed with water proofing compound as per manufacturer's instrutions finished even and fair complete all as specified and directed |
| 19 | M&L for Providing and laying, a fibre reinforced elastomeric liquid applied water proofing membrane with resilient polymers having Sun Reflectivity Index (SRI) of 105. Forms a thick,seamless,durable membrane thus offering ultimate waterproofing with tensile strength 2.5mpa,elongation of more than 500% and resists up to 10 bars of water pressure when executed in 2-3 coats.One coat of Self-priming of elastomeric waterproofing liquid (dilution 30%) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application /system not less than 500 microns).Operation should be complete in all respects as per the direction of Engineer-in- charge.Insert roof tape on all the corners. |
| 20 | M&L for Angle Fillets:Making of angle fillets 75mmX75mm on L joints on the terrace's periphery with Repair Polymer complete all as specified and directed |
| 21 | M&L for rendering on roof, vertical parapet wall, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with and including using water proofing liquid @ 150 ml per bag of cement including application of cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed.(Roof approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge ( Necessary scafolding shall be included in the cost ) |
| 22 | M & L for PCC roof tiles 250mmx250mmx20 mm laid over treatment on accessible roof and including M&L for 15mm thick screed bed in CM 1:4 including taking down old pcc tiles complete all as specified and directed. |
| 23 | S&F welded steel wire fabric weight n' exc 4 Kg per Sq.m as in extra reinforcement to RCC menbers including all cutting, bending and binding complete all as specified and directed |
| 24 | Dismantling asbestos cement (corrugated,semi corrugated etec ) sheets in roof covering . complete all as specified and directed |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 26 | Dismantling timber scantlings 40 sqcm and over in section if any position complete all as specified and directed |
| 27 | M&L for 2nd class H.W clean swan in timber scantlings all as spd and directed by Engr-in-charge. |
| 28 | M&L for Preparing surfaces of wood & wood based materials,new or old ,of any description and girth applying two coat of cresoting complete all as specified and directed |
| 29 | M&L for Rolled mild steel sections/Steel Pipes conforming to Gde Fe-410-0 or Fe-310-0 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed |
| 30 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete gde Fe-410-W or GDe250-A quality |
| 31 | S&F wind ties for roof including securing bolts, including all necessary drilling, bolting or riveting, etc complete |
| 32 | S & F 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed L type or J type Hooks . |
| 33 | All as per item no 32 above but expect sheets complete all as specified and directed |
| 34 | M & L asbestos cement 6 mm thick two Pices adjustable plain wing Ridge fixed with L type or J type hooks. |
| 35 | S& F Pre -paited galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws as spd complete . |
| 36 | S& F Pre -paited galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws as spd complete . |
| 37 | S& F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed |
| 38 | M&L Plain Cement concrete 1:2:4 type B-0 using 12.5 mm greded stone aggregate in leveling course ,benching etc ,finished even & rough to receive cement mortar screed bed complete all as specified and directed |
| 39 | Demolition of Roof,floors(Other than ground floors ) beams,Staircase ,landing chajja,and similar suspended work in cement concrete is reinforforced (reinforcement cut as required to facilotate demolition complete all as specified and directed |
| 40 | M & L Reinforced Cement Concrets type B -1 1:2:4 (using 20 mm graded stone aggregate) as in Chajjas, shelves etc. complete all as specified and directed |
| 41 | Mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed |
| 42 | M & L Form work to chullah hoods, shelves, chajjas, through and similar items including edges in flat surfaces for rough finish surfaces. complete all as specified and directed |
| 43 | Dismantling & breaking up drains pipes 100/75 mm (Saltglaged ware ,AC,PVC) Set in cement mortar complete all as specified and directed |
| 44 | S&F for PVC (SWR) pipes double socketed in any length with rubber Ring joints fixed to walls 110 mm bore fixed complete all as specified and directed |
| 45 | All as per Item No 44 above but 75 mm bore complete all as specified and directed |
| 46 | S&F for PVC (SWR) bends any radius 110 mm bore fixed in repair complete all as specified and directed |
| 47 | All as per item No 46 above but 75 mm bore complete all as specified and directed. |
| 48 | S&F for PVC (SWR) juntion single T equal or uneqoal 110 mm bore fixed in repair complete all as specified and directed. |
| 49 | S&F for PVC (SWR) juntion single T equal or uneqoal 75mm bore fixed in repair complete all as specified and directed. |
| 50 | S&F for PVC (SWR) vent cowl 110 mm bore fixed in repair complete all as specified and directed. |
| 51 | S & F 75/100 PVC (SWR) floor trap, nahani trap, etc plain with grating including jointing with solvent cement complete all as specified and directed |
| 52 | S & F in repair rubber gasket 50mm wide 3 mm thick of approved quality fixed to door complete all as specified and directed. |
| 53 | S&F in repair mild steel 300 mm long ordinary rat rail rod pattern helical door springs, including roller and roller plate complete all as specified and directed. |
| 54 | S & F in repairs Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples ( as in second floor height upto 9.1 Mtr)complete all as specified and directed. |
| 55 | S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane ( as in second floor height upto 9.1 Mtr) including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 56 | S & F Sheet glass 4.80 mm thick, ordinary quality and glazing with rubber gasket in aluminium frame not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed. |
| 57 | M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast and similar work etc complete all as specified and directed. |
| 58 | M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of oil bound distemper including 2 mm thick putty with roller of approved shade/tint complete all as specified and directed. |
| 59 | M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of cement base paint on surfaces of walls complete all as specified and directed. |
| 60 | M&L for preparation of old wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed. |
| 61 | M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 62 | Cleaning and removing all scale and dirt, etc from tanks capacity exc 250 ltr but n exc 500 ltr and from mouths of circulating pipes etc. complete all as specified and directed. |
| 63 | Cleaning and removing all scale and dirt, etc from tanks capacity exc 500 ltr but n exc 1000 ltr and from mouths of circulating pipes etc. complete all as specified and directed. |
| 64 | S & F 500 Ltr Rotational moulded polyethylene water storage tanks (outer layer white color ,Middle layer Black Color and inner layer Blue Color) triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed |
| 65 | S & F 1000 Ltr Rotational moulded polyethylene water storage tanks (outer layer white color ,Middle layer Black Color and inner layer Blue Color) triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 500 but n exc. 1000 litre complete all as specified and directed. |
| 66 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. |
| 67 | Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. |
| 68 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 69 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 70 | Refixing 15 mm GI old steel tubing and connections in new or old position complete all as specified and directed. |
| 71 | Refixing 20 mm GI old steel tubing and connections in new or old position complete all as specified and directed. |
| 72 | S & F in repairs 15 mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 73 | S&F in repair 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed. |
| 74 | S & F in repairs 15 mm bore Chromium plated Angle/Stop valves fency type (straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 75 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 76 | S&F in repairs to CP Brass jet spray for EWC complete all as spd and directed |
| 77 | S&F in repair to toilet paper holder CP Brass fancy type complete all as specified and directed |
| 78 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 79 | S&F for in repairs Stainless steel towel rail, 20mm dia, D type, 60cm long between flanges with both side holders complete all as specified and directed. |
| 80 | S & F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed. |
| 81 | S&F in repairs Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 82 | S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed |
| 83 | Supply and fix in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood on PVC frame complete all as specified and directed. |
| 84 | S & F in repairs Vitreous China wash basin with pedestal white , flat back, size 580mmx450mm including , waste coupling brass,waste pipe, chain and plug and porcelain stopper brackets complete all as specified and directed. |
| 85 | S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550mmx400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed. |
| 86 | S & F in repair Sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495 mm x 420mm bowl size 410mm x 330mm x 250mm fixed complete all as specified and directed. |
| 87 | S & F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mm x 330mm x 250mm fixed complete all as specified and directed. |
| 88 | S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed. |
| 89 | S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580mmx440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed. |
| 90 | S&F in repair vitreous china wash down water closet single piece-WC (cascade pattern ) with UF seat cover, hinge, fixing accessories, cistern fittings, size 655mmx665mmx760mm, S trap-300 white, including connection to drain pipe etc complete all as specified and directed. Make-JAQUAR CAT- LYS-WHT-38851P180UFSM, CERA CAT-A1014112 or Kajaria Cat No VERA-KB3026. |
| 91 | S & F in repairs Vitreous China water closet Padestal pattern white, including mild steel chromium plated or aluminised hinging device seat cover size 630mmx450 mm size white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed. |
| 92 | S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed. |
| 93 | S&F in repairs PVC connections 15mm size with PTMT nuts of length Make Pearl WC181 , Prayag -PTA-68 Jaynam -CNP--104 |
| 94 | S&F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed Make Pearl FTS-424 , Prayag -144-B ,Jaynam PT-103 |
| 95 | S&F in repairs Bib tap standard of PTMT any colour highpressure screwed for iron pipe and fixed. complete all as specified and directed .Make Pearl THL-2181 ,Prayag-1231-f ,Jaynam -PT-101 |
| 96 | S&F in repairs long body Bib tap standard of PTMT any colour highpressure screwed for iron pipe and fixed. complete all as specified and directed |
| 97 | S&F in repairs Pillar taps of PTMT any colour high pressurescrewed for iron pipe and fixed complete all as specified and directed Make Pearl THL-2183 , Prayag -1311-N , Jaynam PT-104 |
| 98 | S&F in repair PVC Nahani trap with grating 110mm x 75mm or as per site requirement complete all as specified and directed |
| 99 | Supply and fix in repair 140mm long Floor door stopper made of double Aluminium rod and hard rubber shoe fixed with steel screws complete all as specified and directed. |
| 100 | S&F in repairs solid pvc waste pipe 32mm dia 80 cm long complete all as specified and directed Prayag Cat Part No 3271-H Prayag PTA 59 ,Jaynam -CNP-136 |
| 101 | S&F in repairs solid pvc waste coupling 32mm dia complete all as specified and directed Make Pearl WC181 , Prayag -PTA-1 ,Jaynam -PT-114 |
| 102 | S&F in repair 20 mm dia MS Fancy type drappery curtain Rod with bracket and lattu and other connceted accessories etc complete all as specified and directed |
| 103 | S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 104 | S&F in repair stainless steel Grating doom 125 mm dia of PTMT(Minimum weight 25gms) Make Pearl PCR-502 , Prayag -PTA-6 Jaynam -ACE-115 |
| 105 | S&F in repair stainless steel Grating doom 125 mm dia complete all as specified and directed. |
| 106 | S&F in repair toilet cabinet 350mmx450mm with mirror and shelves white or coloured complete all as specified |
| 107 | S&F in repair health faucet Health Faucet ABS body with 1 meter SS braided connection pipecomplete all as specified and direted including 1.00 mtr long tube & bracket complete all as specified and directed .Make Jaquar Cat No – ALD -565 or Cera Cat No F8030109AB or Kajaria Cat No KA580009 |
| 108 | Supply & Fix in Repair ivory plastic seat cover for EWC closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed Make – Cera Cat No. B1520104 or Kajaria Cat No. KS 212 or Hindware Cat No E-8382 complete all as specified and as directed |
| 109 | S&F for chromium plated corner glass shelf with bracket and 550 mm longsheet glass including circular cutting, grinding polishing & rounding edges of of glass etc complete all as specified and directed Make : Jaquar, cat No-AQN7771 or Cera Cat No. F001114 or Hindware Cat No F880010 in repair complete all as specified and as directed |
| 110 | S&F CP basin mixer without popup waste system with 450 mm long copper braidedhoses pipe in repair complete all as specified and as directed Make : Jaquar, cat No-COP 167BPM or kohler 74013IN-4ND-CP or Grohe 23405001 |
| 111 | S&F for C P Wall mixer with provision for overheadshower with 115 mm long bend pipe on upperside connecting legs and flags in repair complete all as specified and as directed Make : Jaquar, cat No- QQP 7273PM or Kohler 98755IN-4-CP or Grohe -32638000 |
| 112 | S&F for C P Sink mixer with short Swinging spout with connecting Lehs and wall flanges in repair complete all as specified and as directed Make : Jaquar, cat No- QQP 7307PM or Kohler 37316IN-4-CP or Grohe 32667001 |
| 113 | S&F in repair 1200mmx900mmx5.5 mm beveled edge minor of selected quality glass mounted on 5 mm thick PVC sheet and fixed to wooden plugs with chromium plated brass screws and cup washers ) in repair complete all as specified and as directed |
| 114 | M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete in repair complete all as specified and as directed |
| 115 | S&F in repairs 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 116 | M&L for existing kota stone floor pointed with pigments to match the shade of the slab includding rubbing and wax polishing complete all as specified . |
| 117 | S&F CP brass peg set of six fancy sampe as approved by GE type fixed in repair all as specified. |
| 118 | S&Fin repair aluminium grill of Y/8 shape grill to be fixed on frame with aluminium beading all as directed by Engr-in-charge. |
| 119 | S/F in repair GI nipple 150mm long both ends screwed to iron pipe or one flange and bedded in cement or with back nut and washer fixed to rank (a) 15mm |
| 120 | S/F in repair GI nipple 150mm long both ends screwed to iron pipe or one flange and bedded in cement or with back nut and washer fixed to rank (b) 20mm. |
| 121 | S/F in repair GI nipple 150mm long both ends screwed to iron pipe or one flange and bedded in cement or with back nut and washer fixed to rank (c) 25mm |
| 122 | S/F in repair GI elbow socket or nipple upto 75mm long medium grade (a) 15mm |
| 123 | S/F in repair GI elbow socket or nipple upto 75mm long medium grade (b) 20mm |
| 124 | S/F in repair GI elbow socket or nipple upto 75mm long medium grade (c) 25mm |
| 125 | S/F in repairs PVC cover of PVC water tank capacity of exc 250 and n.exc 500 Ltrs complete all as specified. |
| 126 | M&L in repair for 19/20 mm thick block boards grade 2 quality exterior grade decorative veneers on one face fixed in pelmet boxes or in narrow width shelf complete all as directed. |
| 127 | Repair of steel window shutter not exc 1.5 Sqm each by replacing projected type unserviceable hinges, with welding new hinges or welding or existing broken hinges and handles to window frames and using of shutters to proper losing with oiling to hinges complete all as specified and directed. |
| 128 | All as items no 129 above but ventilation shutter not exc 1 sqm each.complete all as specified and directed. |
| 129 | M&L for Non - skid designer coloured ceramic tiles 7mm to 8 mm thick including borders tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid on floor surface jointed and pointed with coloured cement to match including M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directedby Engineer-in-Charge. |
| 130 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match including M&L for 10 mm thick rendering of cement mortar 1:4 and dismantling of existing tile including cement mortar bedding complete all as specified or as directed. |
| 131 | M & L for non- skid designer ceremic coloured tiles 7 to 8 mm thick including borders tiles (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including M&L for 15mm thick screed bed in cm-1:6 including dismantling of floor or wall tiling all as spd or as directed. |
| 132 | M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 300mmx200 mm jointed and pointed with coloured cement to match over and including M&L for 10 mm thick rendering of cement mortar 1:4 and dismantling of tile including cement mortar bedding complete all as specified or as directed. |
| 133 | M&L for coloured Border Glazed designer heighliter printed tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 450mmx300mm jointed and pointed with coloured cement to match over and including M&L for 10mm thick rendering in CM 1:4 and dismantling of tile including cement mortar bedding complete all as specified or as directed. |
| 134 | M&L for Vitrified tiles designer (light shade) 10 mm thick including borders tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including M&L for 10mm thick rendering in CM 1:4 including dismentling existing tiles complete all as specified and as directed by Engineer-in-Charge. |
| 135 | M&L for Vitrified tiles designer (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including M&L for 15mm thick screed bed in cm 1:6 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge. |
| 136 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc |
| 137 | M & L for machine cut kota stone slab flooring 20-25 mm thick over and including 15mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed. |
| 138 | M & L for machine cut kota stone 20-25 mm thick slab for skirting, dado, riser etc over and including M&L for 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing all as specified and directed. |
| 139 | M&L for 15-18mm thick Marble (Green or coloured) stone for floor, steps, jambs, pillars, window cills, cooking platform and like 13-15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including M&L for 15mm thick screed in CM 1:6 including dismantling of marble complete all as specified and directed |
| 140 | M&L for 15 to 18 mm thick Granite (table rubbed and polished) as in windows cill, door cill, gate pillar/post & cooking platforms and like in cement mortar (1:4) including necessary form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging and including dismantling of granite complete all as spd as directed. |
| 141 | S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600mmx 600mm fixed with and including anodised GI prepainted snap grid with 25mmx25mmx1.5 mm thick Tee section and 38mmx25mmx2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces complete all as specified and directed. |
| 142 | M & L for welding in repair n. exc. 2.5cm in length, thickness of mild steel members to be welded not exc 6mm thick complete all as specified and directed |
| 143 | M&L Aluminium partition frame work anodized/ powder coated frame of size 62.5 mm x 37 mm x 2.5 mm thick with bottom & middle rail of section 62.50 mm x 37 mm x 2.5 mm thick and styles, top rail of section 62.50mm x 37mm x 2.5 mm thick including jointing cleats, fixing of glazing with 5.5 thick ordinary plain glass or 5 mm aluminium composit panel including taking down old existing partition work including necessary fittings fixtures complete |
| 144 | S&F Prelam hollow PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more thant 200 mm. The strips shall be fixed to wall vertically at an equal interval of 10\\" between two PVC strips. A strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be stuck at the places where two panels are jointed, using solvent cement and including taking down existing PVC wall paneling complete all as specified and directed. |
| 145 | Repairing of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed by Engr-in-charge. |
| 146 | Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.complete all as specified and directed. |
| 147 | Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender