Tender For Special Repair To Smq Block No 355 In Madambakkam C At Afs Tambaram (8908/E8)
Tender Value
46.86 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
13 days left
EMD
93720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Smq Block No 355 In Madambakkam C At Afs Tambaram (8908/E8)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | BOQ Amendment | BOQ | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down 15 mm dia steel tubing and Connections,including cleaning for refixing or removal to store in wall, ceiling or floor etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as item No 1 but 20 mm dia of pipe complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F 20 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, elbows, tee,adapters, union on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge. |
| 4 | ---Ditto--- above item no but outer diameter of the pipe is 25mm complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F gate valves 25 mm dia with iron wheel head, screwed both ends for fixing to iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 6 | Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, shelves complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down (Steel/ Wooden) frame any description exc. 1.5 sqm but not exc 4 Sqm each (with out taking off shutter from the frame) incl hardware fittings complete all as specified and directed by Engineer-in-Charge. |
| 8 | All as per item 7 but n exc. 1.5 sqm each with shutters and hardware fittings complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F 2nd class Hard wood factory made glazed/skeleton shutters 35 mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc complete all as specified and directed by Engineer-in-Charge. |
| 10 | S/F factory made flush shutters 35 mm thick solid core construction with particle board core and 3mm thick BWP Ply wood face panels, commercial type on both sides with 6mm thick and both face covered with decorative face veneer with lipping /frame to match complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F mild steel not more than 300mm, ordinary rat tail rod pattern door springs including roller androller plate complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 13 | All as per item no 12, but frame/chowkhat size 100x60mm complete all as specified and directed by Engineer-in-Charge. |
| 14 | All as per item no 12, but but frame/chowkhat size 75x50 mm complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed by Engineer-in-Charge. |
| 16 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners for area of wondow not exceeding 1 sqm and including Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mmthick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured forpayment purpose.) complete all as specified and directed by Engineer-in-Charge. |
| 17 | S & F sheet glass of ordinary quality 5.5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 18 | S & F Figured glass, pin head type, 5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 19 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, including fixing in Aluminium side hund window shutters complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fix Powder coated aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., with and including joining cleats, frames to support the grill etc complete all as specified and directed by Engineer-in-Charge. |
| 21 | S& F factory made both side pre laminated 18mm thick lead free 100% solid WPC(wood polymer composit) sheet for cupboard shutter having high natural fiber contant 25 to 30 % wood colour sheet with density not less than 600 kg /Cum and WPC to be laminated with PVC foil of min 14 micron thick of approved design incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard,Cabinet etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | All as per Srl item No 21 but one side decorative laminated and other side wood nature colour complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for Zinc finished telescopic drawer channel 24 inch long, ball bearing slide for kitchen cabinets and wardrobe complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (storage basket) pull out type for utensils size 480x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (cup and saucers basket) storage basket pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&Fd SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (Plate Basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (cutlery basket) out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge. |
| 28 | S& F Magnetic catcher as approved by GE, fixed with Nut and bolt complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F stainless steel handles of size 150mm fabricated type and fixed complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F factory made solid PVC moulded flush door shuuter with wood free EPS, 30mm thick (Style) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing as specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F 100 mm long stainless steel butt hinges with stainless steel screw and fixed complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F extrunded aluminium alloy handles of size 150mm fabricated type and fixed complete all as specified and directed by Engineer-in-Charge. |
| 34 | S & F continous (piano) hinges mild steel, 40mm width of flaps (when open) , bright finish or electrogalvanised for kitchen cabinet complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F aluminium anodised 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of stainless steel and fixed complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F stainless steel handle(fancy type) of size 150 mm and fixed complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long and fixed complete all as specified and directed by Engineer-in-Charge. |
| 40 | M&L PCC 1:3:6 type C1 (using 20 mm graded agg) as in coping , PCC block for fixing of hold fast, sanitary fittings etc., complete all as specified and directed by Engineer-in-Charge. |
| 41 | 2nd hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F Magic Door Eye 180 Degree view high quality Mounting Diameter : 14 mm and head diameter 35 mm ( Material : Alloy, Color : Gold ) fixed in position of shutter complete all as specified and directed complete all as specified and directed by Engineer-in-Charge. |
| 43 | Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specified and directed by Engineer-in-Charge. |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish outside the MoD land complete all as specified and directed by Engineer-in-Charge. |
| 45 | M/L cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick as in floors finished rough for floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 46 | M/L glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 47 | M/L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but notexceeding 0.38 sqm (joint free)(square/ rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 48 | -ditto- all as per item No 47 but as in skirting/dado including 10 mm thick backing coat in cement morter 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 49 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 50 | Rendering 10mm thick in Cement Mortar 1:3 mixed with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick workat a rate of 3% by weight of cement finished even and smooth with out using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for Cement concrete type E2, 1:5:10 (using 40mm graded aggregate) in filling mass concrete as in sunken floor complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F 40mm bore HDPE pipe as in spout pipes in sunken floors complete all as specified and directed by Engineer-in-Charge. |
| 53 | M&L for applying Nitoproof 600 PF or equivalent approved product minimum 0.8 mm dft over a priming coat on horizontal and vertical surfaces all as manufactures instruction as in sunken slab surfaces complete all as specified and directed by Engineer-in-Charge.(NOTE:- After the application of above treatment contractor has to fill the sunken slab surface with water and check for dampness and seepage . In case there ias a slightest indication of seepageis noticed, the same shall be rectified by injection grouting to seal all cracjs or application of polymer modified mortar FOSROC Nitobond SBR of equivalent approved product admixed with the integral WPC or cementitious crystline waterproofing compound in the affected area to seal all cracks and micro cracks if any and additional coat of Nitoproof 600 PF . This shall be done by contractor at his own cost only and rate is deemed to be included in the rate quoted by the contractor complete all as specified and directed by Engineer-in-Charge. |
| 54 | Providing and applying HS TPO membrane of 1.2mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with terminatin strip and fix it by screw at 300 mm c/c and sealed with HS Jointseal PU on top including surface preparation like remove all loose gravels,dirt,oil,grease,and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75 mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO completely as per specification and direction.( Note:- work to be carried out by authorities applicator of M/S Asian or equivalent company.) complete all as specified and directed by Engineer-in-Charge. |
| 55 | M&L cement concrete type B1, 1:2:4 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 25mm dia ball brass valve high pressure with polythene float including suitable nipple and dismantling&lowering of existing RCC/ PVC tank of any capacity with and including removal of rubbish outside MoD land complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in repair viterous china WHB with Pedesatal patttern of size 460x350mm incl GI Brackets, 32 mm CP brass waste coupling with check nut and washers, PVC conncetion and waste pipe of suitable to be complete all as specifed and directed Make Pyayag cat part No 4656/ Jaquar/ Parryware/ CERA/ Hindware or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in reapirs stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as specified and directed by Engineer-in-Charge. |
| 59 | S & F in repair 20-25 mm bore dia stainless steel curtain rod ( wall thickness not less than 1mm) with approved finials and fixing brackets ,stops, rollers etc complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F Brass CP 3-in-1 wall mixer for mixing hot & cold water including CP Telephinic and 125mm size brass chromium plated shower roseover head shower L bend tube and fixing accessories screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F in repair 15 mm bore CP Bib tap long body cast copper alloy fancy type with suitable flanges crutch or butterfly handles screwed down for iron or for brass ferrule Make Pyayag cat part No 8208/ Jaquar/ Parryware or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and fixing Kitchen sink tap chromium plated finish dual flow pattern with silicon clack flexible hose swivel type for 15mm dia bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 63 | S/F in repair 15 mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes Make Pyayag cat part No 6302-N / Jaquar/ Parryware or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & fix in repairs 15mm bore angular stop cock, chromium plated , fancy type, with suitable flanges screwed for iron pipe or brass ferrule, and fixed in repairs complete all as specified and directed Make Pyayag cat part No PR-544 / Jaquar/ Parryware or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F in repair 15 mm bore ,2 way CP Bib tap long body cast copper alloy fancy type with suitable flanges crutch or butterfly handles screwed down for iron or for brass ferrule Make Pyayag Make Prayag Cat part No 6512 / Jaquar/ Parryware or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 66 | S/F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed all as directed Make Pyayag/ Jaquar or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 67 | Cutting holes in brick walls in cement mortar for inserting GI pipe and making good dismanlted portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick depth of embedded portion from the face of the jamb complete all as specified and directed by Engineer-in-Charge. |
| 68 | S & F in repairs PVC flushing cistern of 10 litres capacity, low or high level with valveless syphonic action and float value, pull knob including brackets, PVC connection, PVC flush pipe 32 mm dia etc., complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repairs Vitreous china wash down water closet pan (Pedestal pattern) white 'P' trap (excluding fixing bolts, flushing cistern and flush pipe), and fixed in position in repairs complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply only PVC Water closet Seat Cover white or Black closed pattern with flat bottom and cover with PVC, aluminium or MS cromium plated hinge devises etc incl fixing in repair complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 72 | M&L PVC (SWR) floor trap, dia of outlet 75mm plain with grating, including jointing, with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 73 | S & F PVC (SWR) Soil, Waste and Vent Pipe 75mm bore (dia), Single Socketed, in any length with Rubber Ring Joint fixed to Wall with suitable clamps or Laid in Trenches etc., including Taking down/up unserviceable Pipe, complete all as specified and directed by Engineer-in-Charge. |
| 74 | All as per Item above here–in–before but 110mm bore (dia) complete all as specified and directed by Engineer-in-Charge. |
| 75 | PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and directed by Engineer-in-Charge. |
| 76 | All as per Item above here–in–before but 110mm bore (dia) complete all as specified and directed by Engineer-in-Charge. |
| 77 | PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and directed by Engineer-in-Charge. |
| 78 | All as per Item above here–in–before but 110mm bore (dia) complete all as specified and directed by Engineer-in-Charge. |
| 79 | S & F PVC (SWR) vent cowl, size of bore 75mm complete all as specified and directed by Engineer-in-Charge. |
| 80 | S & F PVC (SWR) vent cowl, size of bore 110mm complete all as specified and directed by Engineer-in-Charge. |
| 81 | S & F Chromium plated soap dish complete all as specified and directed complete all as specified and directed by Engineer-in-Charge. |
| 82 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and directed by Engineer-in-Charge. |
| 83 | M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar in two layers in CM 1:4 (5mm finishing layer over 10mm base layer )Rendering 5mm thick in Cement Mortar 1:4 mixed with water proofing compound at a rate of 3% by weight of cement complete all as specified and directed by Engineer-in-Charge.Note :- WPC shall be measured and paid seperately |
| 84 | M&L for Rendering 10mm thick on Fair Faces of Brick Work or Concrete Surfaces in Cement Mortar 1:6, and finished Even and Smooth without using Extra Cement, complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L for Rendering 5 mm thick in Cement Mortar 1:3 on concrete surfaces on ceiling finished Even and Smooth without using Extra Cement complete all as specified and directed by Engineer-in-Charge. |
| 86 | M/L preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 87 | M & L preparation of newly plastered ceilling and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer over 1 mm thick interior putty complete all as specified and directed by Engineer-in-Charge. |
| 88 | M&L for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered ceilling and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specified and directed by Engineer-in-Charge. |
| 89 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty over new surfaces complete all as specified and directed by Engineer-in-Charge. |
| 90 | M&L for complete removal of plastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty old prepared surfaces complete all as specified and directed by Engineer-in-Charge. |
| 91 | M & L preparation of newly plastered wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specified and directed by Engineer-in-Charge. |
| 92 | M&L for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specified and directed by Engineer-in-Charge. |
| 93 | Writing letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all and the colour of paint and dimension of letter to be used as specified and directed by Engineer-in-Charge. |
| 94 | Writing Stops, commas, short lines, dashes, huphesn, brackets etc and the colour of paint and dimension of characters to be used complete all as specified and directed by Engineer-in-Charge. |
| 95 | M&L for complete removal of existing WPT course (i.e) bituminous felt broken tiles mud phaska including removing grown vegetation roots etc or any other kind of treatment surface over roof slab and and removing loose mortar & dust particles until to reach sound surface by using mechanical or manual tools and attending the cracks , holes like as weak points by using manufactures instruction .Providing and Laying polymer concrete by adding crystalline internal membrane admixtures by the ratio of (1 bag cement = 500gms crystalline admixtures ) making hunch surface 100mm x 100mm of floor & wall joint area. The surface to be cleaned free from oil grease,wax,dust and other barrier materials.The entire area applied primer as a base layer and over the top placing Fiber mesh & applied entire floor & around wall 1 ft area two coats of water based, UV resistant Elastomeric PU liquid membrane waterproofing coating with required time intervals by using brand ShaliUrethane-BTD.Dilute ShaliUrethane® BTD with water @ 1:1 ratio and use as primer @ 400 gm / m².Apply 1st coat of ShaliUrethane® BTD @ 1 kg (or 0.8 kg) / m² by brush / roller / airless spray while the primed surface is tacky. For faster and smoother application, apply with airless gun. Spread Non-woven Geo-textile fabric or Fiber Glass Tissue / scrimp of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky; this is optional, to be assessed as per site requirements to achieve higher mechanical properties. Apply 2nd coat of ShaliUrethane® BTD @ 1 kg (or 0.8 kg) / m² by brush / roller / airless spray for final DFT of 1200 micron in two coats (for 1000 microns DFT apply 0.825 kg / m² / coat) complete all as specified and directed by Engineer-in-Charge. |
| 96 | M&L 25 mm thick (avg) plain cement concrete 1:2:4, type B-0 bring up to the slope to 1 in 75 by providig light weight meterials such as clinder,light weight congrete etc as required complete all as specified and directed by Engineer-in-Charge. |
| 97 | M&L for Rendering 5 mm thick in cement mortar 1:3 mixed with water proofing compound at the rate of 3% by weight of cement on roof surfaces while concrete in green complete all as specified and directed by Engineer-in-Charge. |
| 98 | Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 99 | M& L Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc in apron complete all as specified and directed by Engineer-in-Charge. |
| 100 | M & L Post constructional Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by Engineer-in-Charge. |
| 101 | M&L as in repairs 18-20mm thick Granite slab work of machine cut single piece, mirror polished, premoulded and prepolished, as in side and top of vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc (providing suitable hole for LPG pipe line for cooking platform) and taking down of existing any type of tiles/granite of any description complete all as specified and directed by Engineer-in-Charge. |
| 102 | M&L Machine cut single piece polished 20-25 mm thick kota stone slab as in staircase , landing and the similar a over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 15mm thick screed bed in CM 1:4 with and including 02 Nos grooves longitudinally and roughening the old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engineer-in-Charge. |
| 103 | All as per above item No 102 but for risers/skirting over screed of 10 mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 104 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 106 | S&F in repair sheet glass assembly of size 18x5.5 inches, consisting of chrominium plated bracket guard and railing complete all as specified and directed by Engineer-in-Charge. |
| 107 | S&F fancy type frameless looking mirror of size 600mmx450mm of bevelled edge mirror made out of selected quality glass of 6mm thick on stailess steel brackets & stainless steel fancy screws & locking washers at 04 corners fixed tio wall surface with requisite fitting arrangements complete all as specified and directed by Engineer-in-Charge. |
| 108 | S&F for 8 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/mtr, minimum weight of rope shall not be less than 7700Gms/unit complete all as specified and directed by Engineer-in-Charge. |
| 109 | S & F framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled/ welded for fixing of steel sheeting, hinges or other covering fixing complete with Fe-410-W (Gde-E-250-quality-A) complete all as specified and directed by Engineer-in-Charge. |
| 110 | M&L preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 111 | M&L for applying one coats of synthetic enamel paint preparation of old steel surface of grith exc 10 cm etc complete all as specifed complete all as specified and directed by Engineer-in-Charge. |
| 112 | Removing/taking down of old detoriated plaster surface from Chajja/lintel/fins/facia and the like, fixing of Chicken wire meh with staples or nailing, after cleaning the surface, apply a coat of cement slury, 10 mm thick rendering in two layers in Cement Mortar 1:4 mixed with water proofing compound at a rate of 3% by weight of cement over including finished even and smooth with out using extra cement, and match the surface with existing including neccesry formwork and scafolding arrangements at a height of bldg G+2 level complete all as specified and directed by Engineer-in-Charge. |
| 113 | Preparation of old steel surface of any description and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 114 | Demolition existing cement concrete reinforced shelves and cup boards as in any positioin and descrption and in any position not otherwise specifically provided forcomplete and removal of debris outside MoD land complete all as specified and directed by Engineer-in-Charge. |
| 115 | M/L Fly Ash Brick with fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 incl demolition of existing brickwork of any description complete all as specified and directed by Engineer-in-Charge. |
| 116 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 117 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 days